[PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default
Paul Liu
paul.liu at linaro.org
Fri Aug 13 11:59:52 CEST 2021
Hi Fabio,
Can we think of a way to keep this fip.bin feature? This is part of the
SystemReady IR certificate for this Compulab board. [1]
[1]
https://developer.arm.com/architectures/system-architectures/arm-systemready/ir
Yours,
Paul
On Fri, 13 Aug 2021 at 08:59, Fabio Estevam <festevam at denx.de> wrote:
> When trying to build the imx8mm-cl-iot-gate_defconfig target there is a
> build error due to the missing 'fip.bin'.
>
> To make the build process more consistent with other i.MX8M boards,
> do not build fip.bin by default.
>
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
> arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 14 +-------------
> 1 file changed, 1 insertion(+), 13 deletions(-)
>
> diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
> b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
> index 3226a244a97e..00927c157449 100644
> --- a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
> @@ -217,18 +217,6 @@
> };
> };
>
> - fip {
> - description = "Trusted Firmware
> FIP";
> - type = "firmware";
> - arch = "arm64";
> - compression = "none";
> - load = <0x40310000>;
> -
> - fip_blob: blob-ext{
> - filename = "fip.bin";
> - };
> - };
> -
> fdt {
> description = "NAME";
> type = "flat_dt";
> @@ -246,7 +234,7 @@
> conf {
> description = "NAME";
> firmware = "uboot";
> - loadables = "atf", "fip";
> + loadables = "atf";
> fdt = "fdt";
> };
> };
> --
> 2.25.1
>
>
More information about the U-Boot
mailing list