[PATCH 6/9] ddr: Migrate DDR_SPD to Kconfig

Tom Rini trini at konsulko.com
Sat Aug 21 19:50:16 CEST 2021


Move the symbol that controls building some JEDEC SPD support functions
to Kconfig.  This is required on the TI keystone 2 platforms and very
frequently (but not always) used on large number of Freescale/NXP
platforms, so use imply there.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/Kconfig        | 1 +
 drivers/ddr/Kconfig     | 6 ++++++
 drivers/ddr/fsl/Kconfig | 4 ++++
 3 files changed, 11 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d692139199c4..9c18c47540c7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -723,6 +723,7 @@ config ARCH_KEYSTONE
 	bool "TI Keystone"
 	select CMD_POWEROFF
 	select CPU_V7A
+	select DDR_SPD
 	select GPIO_EXTRA_HEADER
 	select SUPPORT_SPL
 	select SYS_ARCH_TIMER
diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig
index d4b393d25e07..0b767acee811 100644
--- a/drivers/ddr/Kconfig
+++ b/drivers/ddr/Kconfig
@@ -1,2 +1,8 @@
+config DDR_SPD
+	bool "JEDEC Serial Presence Detect (SPD) support"
+	help
+	  For memory controllers that can utilize it, add enable support for
+	  using the JEDEC SDP standard.
+
 source "drivers/ddr/altera/Kconfig"
 source "drivers/ddr/imx/Kconfig"
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index 8246f627982c..6461a54d7a8e 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -116,22 +116,26 @@ choice
 config SYS_FSL_DDR4
 	bool "Freescale DDR4 controller"
 	depends on SYS_FSL_HAS_DDR4
+	imply DDR_SPD
 	select SYS_FSL_DDRC_GEN4
 
 config SYS_FSL_DDR3
 	bool "Freescale DDR3 controller"
 	depends on SYS_FSL_HAS_DDR3
+	imply DDR_SPD
 	select SYS_FSL_DDRC_GEN3 if PPC
 	select SYS_FSL_DDRC_ARM_GEN3 if ARM
 
 config SYS_FSL_DDR2
 	bool "Freescale DDR2 controller"
 	depends on SYS_FSL_HAS_DDR2
+	imply DDR_SPD
 	select SYS_FSL_DDRC_GEN2 if (!MPC86xx && !SYS_FSL_DDRC_GEN3)
 
 config SYS_FSL_DDR1
 	bool "Freescale DDR1 controller"
 	depends on SYS_FSL_HAS_DDR1
+	imply DDR_SPD
 	select SYS_FSL_DDRC_GEN1
 
 endchoice
-- 
2.17.1



More information about the U-Boot mailing list