[PATCH v2 4/9] verdin-imx8mm: switch to use binman to pack images
Simon Glass
sjg at chromium.org
Tue Aug 24 18:13:42 CEST 2021
Hi Marcel,
On Mon, 23 Aug 2021 at 09:09, Marcel Ziswiler <marcel at ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
> Use binman to pack images.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
> ---
>
> Changes in v2:
> - Explicitly pass filename to binman when generating binaries as
> suggested by Heiko.
> - Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
> pointed out by Heiko.
>
> arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 124 ++++++++++++++++++++++-
> arch/arm/mach-imx/imx8m/Kconfig | 1 +
> board/toradex/verdin-imx8mm/imximage.cfg | 11 +-
> configs/verdin-imx8mm_defconfig | 2 +-
> doc/board/toradex/verdin-imx8mm.rst | 53 +++++-----
> 5 files changed, 157 insertions(+), 34 deletions(-)
>
> diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
> index a97626fa0c1..a3ad8f3ad37 100644
> --- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
> @@ -1,11 +1,15 @@
> // SPDX-License-Identifier: GPL-2.0+ OR MIT
> /*
> - * Copyright 2020 Toradex
> + * Copyright 2021 Toradex
> */
>
> #include "imx8mm-u-boot.dtsi"
>
> / {
> + binman: binman {
> + multiple-images;
> + };
> +
> firmware {
> optee {
> compatible = "linaro,optee-tz";
> @@ -91,3 +95,121 @@
> &wdog1 {
> u-boot,dm-spl;
> };
> +
> +&binman {
> + u-boot-spl-ddr {
> + align = <4>;
> + align-size = <4>;
> + filename = "u-boot-spl-ddr.bin";
> + pad-byte = <0xff>;
> +
> + u-boot-spl {
> + align-end = <4>;
> + };
> +
> + blob_1: blob-ext at 1 {
This works but the naming is a little odd. You can do:
1d-imem {
type = "blob-ext";
> + filename = "lpddr4_pmu_train_1d_imem.bin";
> + size = <0x8000>;
> + };
> +
> + blob_2: blob-ext at 2 {
> + filename = "lpddr4_pmu_train_1d_dmem.bin";
> + size = <0x4000>;
> + };
> +
> + blob_3: blob-ext at 3 {
> + filename = "lpddr4_pmu_train_2d_imem.bin";
> + size = <0x8000>;
> + };
> +
> + blob_4: blob-ext at 4 {
> + filename = "lpddr4_pmu_train_2d_dmem.bin";
> + size = <0x4000>;
> + };
> + };
> +
> + spl {
> + filename = "spl.bin";
> +
> + mkimage {
> + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
> +
> + blob {
> + filename = "u-boot-spl-ddr.bin";
> + };
> + };
> + };
> +
> + itb {
> + filename = "u-boot.itb";
> +
> + fit {
> + description = "Configuration to load ATF before U-Boot";
> + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> + #address-cells = <1>;
> +
> + images {
> + uboot {
> + arch = "arm64";
> + compression = "none";
> + description = "U-Boot (64-bit)";
> + load = <CONFIG_SYS_TEXT_BASE>;
> + type = "standalone";
> +
> + uboot_blob: blob-ext {
> + filename = "u-boot-nodtb.bin";
> + };
> + };
> +
> + atf {
> + arch = "arm64";
> + compression = "none";
> + description = "ARM Trusted Firmware";
> + entry = <0x920000>;
> + load = <0x920000>;
> + type = "firmware";
> +
> + atf_blob: blob-ext {
> + filename = "bl31.bin";
> + };
> + };
> +
> + fdt {
> + compression = "none";
> + description = "NAME";
> + type = "flat_dt";
> +
> + uboot_fdt_blob: blob-ext {
> + filename = "u-boot.dtb";
> + };
> + };
> + };
> +
> + configurations {
> + default = "conf";
> +
> + conf {
> + description = "NAME";
> + fdt = "fdt";
> + firmware = "uboot";
> + loadables = "atf";
> + };
> + };
> + };
> + };
> +
> + imx-boot {
> + filename = "flash.bin";
> + pad-byte = <0x00>;
> +
> + spl: blob-ext at 1 {
> + filename = "spl.bin";
> + offset = <0x0>;
> + };
> +
> + uboot: blob-ext at 2 {
> + filename = "u-boot.itb";
> + offset = <0x5fc00>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
> index a2ba30cf332..3eccc6b4d4f 100644
> --- a/arch/arm/mach-imx/imx8m/Kconfig
> +++ b/arch/arm/mach-imx/imx8m/Kconfig
> @@ -106,6 +106,7 @@ config TARGET_PICO_IMX8MQ
>
> config TARGET_VERDIN_IMX8MM
> bool "Support Toradex Verdin iMX8M Mini module"
> + select BINMAN
> select IMX8MM
> select SUPPORT_SPL
> select IMX8M_LPDDR4
> diff --git a/board/toradex/verdin-imx8mm/imximage.cfg b/board/toradex/verdin-imx8mm/imximage.cfg
> index b8b25ff4201..a303f98e170 100644
> --- a/board/toradex/verdin-imx8mm/imximage.cfg
> +++ b/board/toradex/verdin-imx8mm/imximage.cfg
> @@ -1,16 +1,9 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> - * Copyright 2020 Toradex
> + * Copyright 2021 Toradex
> */
>
> #define __ASSEMBLY__
>
> -FIT
> BOOT_FROM emmc_fastboot
> -LOADER spl/u-boot-spl-ddr.bin 0x7E1000
> -SECOND_LOADER u-boot.itb 0x40200000 0x60000
> -
> -DDR_FW lpddr4_pmu_train_1d_imem.bin
> -DDR_FW lpddr4_pmu_train_1d_dmem.bin
> -DDR_FW lpddr4_pmu_train_2d_imem.bin
> -DDR_FW lpddr4_pmu_train_2d_dmem.bin
> +LOADER u-boot-spl-ddr.bin 0x7E1000
> diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
> index 624f1b99096..b323ceb19af 100644
> --- a/configs/verdin-imx8mm_defconfig
> +++ b/configs/verdin-imx8mm_defconfig
> @@ -24,7 +24,7 @@ CONFIG_DISTRO_DEFAULTS=y
> CONFIG_FIT=y
> CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
> CONFIG_OF_SYSTEM_SETUP=y
> CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/verdin-imx8mm/imximage.cfg"
> # CONFIG_USE_BOOTCOMMAND is not set
> diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
> index b9f7dc39c96..a11c82da2f5 100644
> --- a/doc/board/toradex/verdin-imx8mm.rst
> +++ b/doc/board/toradex/verdin-imx8mm.rst
> @@ -34,10 +34,10 @@ Get the DDR Firmware
> .. code-block:: bash
>
> $ cd ..
> - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
> - $ chmod +x firmware-imx-8.4.1.bin
> - $ ./firmware-imx-8.4.1.bin
> - $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
> + $ chmod +x firmware-imx-8.10.1.bin
> + $ ./firmware-imx-8.10.1.bin
> + $ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*.bin ./
This makes me wonder if we should add a way for binman to locate blobs?
>
> Build U-Boot
> ------------
> @@ -46,7 +46,7 @@ Build U-Boot
> $ export CROSS_COMPILE=aarch64-linux-gnu-
> $ export ATF_LOAD_ADDR=0x920000
> $ make verdin-imx8mm_defconfig
> - $ make flash.bin
> + $ make
>
> Flash to eMMC
> -------------
> @@ -78,21 +78,28 @@ Output:
>
> .. code-block:: bash
>
> - U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
> - Normal Boot
> - Trying to boot from MMC1
> -
> - U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
> -
> - CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
> - Reset cause: POR
> - DRAM: 2 GiB
> - MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> - Loading Environment from MMC... OK
> - In: serial
> - Out: serial
> - Err: serial
> - Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
> - Net: eth0: ethernet at 30be0000
> - Hit any key to stop autoboot: 0
> - Verdin iMX8MM #
> +U-Boot SPL 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
> +Normal Boot
> +WDT: Started with servicing (60s timeout)
> +Trying to boot from MMC1
> +NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
> +NOTICE: BL31: Built : 18:02:12, Aug 16 2021
> +
> +
> +U-Boot 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
> +
> +CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz
> +Reset cause: POR
> +DRAM: 2 GiB
> +WDT: Started with servicing (60s timeout)
> +MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> +Loading Environment from MMC... OK
> +In: serial
> +Out: serial
> +Err: serial
> +Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.1A, Serial# 06760554
> +Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333
> +Setting variant to wifi
> +Net: eth0: ethernet at 30be0000
> +Hit any key to stop autoboot: 0
> +Verdin iMX8MM #
> --
> 2.26.2
>
Regards,
Simon
More information about the U-Boot
mailing list