[PATCH V2 1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks

[Adam Ford]

On Tue, Aug 24, 2021 at 1:41 PM Adam Ford <aford173 at gmail.com> wrote:
>
> There are two versaclock programmable clock chips used to provide
> reference clocks for both USB and Ethernet.  Enable the driver
> in the configs to run these clocks.
>
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---

Go ahead and drop this now.
I have FIT working with multiple DTB's from one config file. I'll push
a new series to unify M/N/H boards into one defconfig, then add new
the functions to the one remaining board.  That should eliminate a lot
of duplicated entries.

adam
> V2: Move from defconfig to kconfig
>
> diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
> index a6dcce180b..c90ea06692 100644
> --- a/arch/arm/mach-rmobile/Kconfig.64
> +++ b/arch/arm/mach-rmobile/Kconfig.64
> @@ -76,18 +76,24 @@ config TARGET_BEACON_RZG2H
>         select R8A774E1
>         select RZ_G2
>         select PINCTRL_PFC_R8A774E1
> +       select CLK_CCF
> +       select CLK_VERSACLOCK
>
>  config TARGET_BEACON_RZG2M
>         bool "Beacon EmbeddedWorks RZ/G2M Dev Kit"
>         select R8A774A1
>         select RZ_G2
>         select PINCTRL_PFC_R8A774A1
> +       select CLK_CCF
> +       select CLK_VERSACLOCK
>
>  config TARGET_BEACON_RZG2N
>         bool "Beacon EmbeddedWorks RZ/G2N Dev Kit"
>         select R8A774B1
>         select RZ_G2
>         select PINCTRL_PFC_R8A774B1
> +       select CLK_CCF
> +       select CLK_VERSACLOCK
>
>  config TARGET_CONDOR
>         bool "Condor board"
> --
> 2.25.1
>