[PATCH] board/imx6sabresd: add the option of imx6solo during FIT matching

Fabio Estevam festevam at gmail.com
Tue Aug 31 04:17:57 CEST 2021


Hi Mingrui,

On Mon, Aug 30, 2021 at 11:07 PM Mingrui Ren <jiladahe1997 at gmail.com> wrote:

> Hi Fabio,
>
> Thanks for your reply. I'm using my own board based on sabresd with mx6solo.
>
> The reson I made this change is that I found on the mx6solo official
> website:
> https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-6-processors/i-mx-6solo-processors-single-core-multimedia-3d-graphics-arm-cortex-a9-core:i.MX6S
> In "Development Boards and Designs",it seems that sabresd is used as the
> development board.

The point is that there is no  mx6sabresd board populated with a mx6solo chip.

> Also,the Reference Manual of mx6solo is same as mx6dl.
>
> In summary,I think if someone is going to use mx6solo, he will refer to
> sabresd board. So please consider this patch.

That would be misleading.

There are other mx6solo boards supported in U-Boot.

mx6sabresd is not one of these boards, so we should not artificially
support a non-existent solo version.

Thanks


More information about the U-Boot mailing list