[PATCH 4/9] configs: meson64_android: implement A/B slot support

Neil Armstrong narmstrong at baylibre.com
Thu Aug 5 18:21:02 CEST 2021


On 05/08/2021 17:17, Mattijs Korpershoek wrote:
> Implement A/B slot selection using the U-Boot ab_select command.
> 
> Keep support for non A/B.
> 
> Not: We need to redefine the recovery partition label, as RecoveryOS
> is included in the boot image for A/B systems [1]
> 
> [1] https://source.android.com/devices/tech/ota/ab/ab_implement#recovery
> Signed-off-by: Guillaume La Roque <glaroque at baylibre.com>
> Signed-off-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
>  include/configs/meson64_android.h | 55 ++++++++++++++++++++++++++-----
>  1 file changed, 47 insertions(+), 8 deletions(-)
> 
> diff --git a/include/configs/meson64_android.h b/include/configs/meson64_android.h
> index 48a23b6e41..83fa25bfb1 100644
> --- a/include/configs/meson64_android.h
> +++ b/include/configs/meson64_android.h
> @@ -25,9 +25,6 @@
>  #define CONTROL_PARTITION "misc"
>  #endif
>  
> -#ifndef RECOVERY_PARTITION
> -#define RECOVERY_PARTITION "recovery"
> -
>  #if defined(CONFIG_CMD_AVB)
>  #define AVB_VERIFY_CHECK \
>  	"if test \"${force_avb}\" -eq 1; then " \
> @@ -42,12 +39,48 @@
>  		"echo Running without AVB...; "\
>  	"fi;"
>  
> -#define AVB_VERIFY_CMD "avb_verify=avb init ${mmcdev}; avb verify;\0"
> +#define AVB_VERIFY_CMD "avb_verify=avb init ${mmcdev}; avb verify $slot_suffix;\0"
>  #else
>  #define AVB_VERIFY_CHECK ""
>  #define AVB_VERIFY_CMD ""
>  #endif
>  
> +#if defined(CONFIG_CMD_AB_SELECT)
> +#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \
> +	"if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \
> +	"then " \
> +		"echo " CONTROL_PARTITION \
> +			" partition number:${control_part_number};" \
> +		"ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
> +	"else " \
> +		"echo " CONTROL_PARTITION " partition not found;" \
> +	"fi;\0"
> +
> +#define AB_SELECT_SLOT \
> +	"run get_current_slot; " \
> +	"if test -e \"${current_slot}\"; " \
> +	"then " \
> +		"setenv slot_suffix _${current_slot}; " \
> +	"else " \
> +		"echo current_slot not found;" \
> +		"exit;" \
> +	"fi;"
> +
> +#define AB_SELECT_ARGS \
> +	"setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \
> +	"echo A/B cmdline addition: ${bootargs_ab};" \
> +	"setenv bootargs ${bootargs} ${bootargs_ab};"
> +
> +#define AB_BOOTARGS " androidboot.force_normal_boot=1"
> +#define RECOVERY_PARTITION "boot"
> +#else
> +#define AB_SELECT_SLOT ""
> +#define AB_SELECT_ARGS " "
> +#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD ""
> +#define AB_BOOTARGS " "
> +#define RECOVERY_PARTITION "recovery"
> +#endif
> +
>  #define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \
>  	"bootcmd_fastboot=" \
>  		"setenv run_fastboot 0;" \
> @@ -112,9 +145,11 @@
>  			"echo Running Recovery...;" \
>  			"mmc dev ${mmcdev};" \
>  			"setenv bootargs \"${bootargs} androidboot.serialno=${serial#}\";" \
> +			AB_SELECT_SLOT \
> +			AB_SELECT_ARGS \
>  			AVB_VERIFY_CHECK \
> -			"part start mmc ${mmcdev} " RECOVERY_PARTITION " boot_start;" \
> -			"part size mmc ${mmcdev} " RECOVERY_PARTITION " boot_size;" \
> +			"part start mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_start;" \
> +			"part size mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_size;" \
>  			"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
>  				"echo Running Android Recovery...;" \
>  				"bootm ${loadaddr};" \
> @@ -131,10 +166,13 @@
>  		"echo Loading Android " BOOT_PARTITION " partition...;" \
>  		"mmc dev ${mmcdev};" \
>  		"setenv bootargs ${bootargs} androidboot.serialno=${serial#};" \
> +		AB_SELECT_SLOT \
> +		AB_SELECT_ARGS \
>  		AVB_VERIFY_CHECK \
> -		"part start mmc ${mmcdev} " BOOT_PARTITION " boot_start;" \
> -		"part size mmc ${mmcdev} " BOOT_PARTITION " boot_size;" \
> +		"part start mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_start;" \
> +		"part size mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_size;" \
>  		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
> +			"setenv bootargs \"${bootargs} " AB_BOOTARGS "\"  ; " \
>  			"echo Running Android...;" \
>  			"bootm ${loadaddr};" \
>  		"fi;" \
> @@ -163,6 +201,7 @@
>  #define CONFIG_EXTRA_ENV_SETTINGS                                     \
>  	"partitions=" PARTS_DEFAULT "\0"                              \
>  	"mmcdev=2\0"                                                  \
> +	ANDROIDBOOT_GET_CURRENT_SLOT_CMD                              \
>  	AVB_VERIFY_CMD                                                \
>  	"force_avb=0\0"                                               \
>  	"gpio_recovery=88\0"                                          \
> 

Acked-by: Neil Armstrong <narmstrong at baylibre.com>


More information about the U-Boot mailing list