[PATCH 0/5] arm: mach-k3: Fixes for j721e/j7200 clock data and drivers

[Dave Gerlach]

Hi,
This series contains several fixes for TI j721e and j7200 platforms data
and also some fixes for TI clock drivers that make use of this data.

All fixes are related to PLL post dividers reporting the wrong frequency,
and now the new frequencies for below clocks match what registers are
actually configured for.

Clock: Old Frequency -> New Frequency
-----------------------------------------
postdiv2_16fft_main_0_hsdivout6_clk: 66666667 -> 200000000
postdiv2_16fft_main_1_hsdivout5_clk: 320000000 -> 960000000
postdiv2_16fft_main_1_hsdivout7_clk: 320000000 -> 960000000

Regards,
Dave

Dave Gerlach (2):
  arm: mach-k3: Add note to auto-generated files
  clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write

Suman Anna (3):
  arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks
  arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks
  clk: ti: k3: Update driver to account for divider flags

 arch/arm/mach-k3/j7200/clk-data.c |  87 ++++++++++++-----------
 arch/arm/mach-k3/j7200/dev-data.c |   2 +
 arch/arm/mach-k3/j721e/clk-data.c | 113 +++++++++++++++---------------
 arch/arm/mach-k3/j721e/dev-data.c |   2 +
 drivers/clk/ti/clk-k3-pll.c       |  13 +++-
 drivers/clk/ti/clk-k3.c           |   4 +-
 include/k3-clk.h                  |  30 ++++----
 7 files changed, 137 insertions(+), 114 deletions(-)

-- 
2.28.0