[PATCH v2] tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled
Matwey V. Kornilov
matwey.kornilov at gmail.com
Thu Aug 5 21:06:05 CEST 2021
%pM format string is used to print MAC-address and this is required while SPL
network boot.
This patch fixes the SPL boot issues like the following:
Trying to boot from USB eth
## Error: flags type check failure for "ethaddr" <= "40309614M" (type: m)
## Error inserting "ethaddr" variable, errno=1
eth0: eth_cpsw## Error: flags type check failure for "eth1addr" <=
"81f01114M" (type: m)
## Error inserting "eth1addr" variable, errno=1
, eth1: usb_ether
eth_cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT !
Problem booting with BOOTP
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
Signed-off-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>
---
Changes since v1:
- avoid the preprocessor as suggested by Simon Glass
lib/tiny-printf.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c
index 8fc7e48d99..89aaa85477 100644
--- a/lib/tiny-printf.c
+++ b/lib/tiny-printf.c
@@ -9,8 +9,9 @@
*/
#include <common.h>
-#include <stdarg.h>
+#include <log.h>
#include <serial.h>
+#include <stdarg.h>
#include <linux/ctype.h>
struct printf_info {
@@ -269,20 +270,19 @@ static int _vprintf(struct printf_info *info, const char *fmt, va_list va)
}
break;
case 'p':
-#ifdef DEBUG
- pointer(info, fmt, va_arg(va, void *));
- /*
- * Skip this because it pulls in _ctype which is
- * 256 bytes, and we don't generally implement
- * pointer anyway
- */
- while (isalnum(fmt[0]))
- fmt++;
- break;
-#else
+ if (CONFIG_IS_ENABLED(NET_SUPPORT) || _DEBUG) {
+ pointer(info, fmt, va_arg(va, void *));
+ /*
+ * Skip this because it pulls in _ctype which is
+ * 256 bytes, and we don't generally implement
+ * pointer anyway
+ */
+ while (isalnum(fmt[0]))
+ fmt++;
+ break;
+ }
islong = true;
/* no break */
-#endif
case 'x':
if (islong) {
num = va_arg(va, unsigned long);
--
2.31.1
More information about the U-Boot
mailing list