[PATCH 4/7] imx8mp_evk: Fix incorrect cascade for FEC and EQOS setup

[Ye Li]

The setup functions should be independent for two ethernet controllers

Signed-off-by: Ye Li <ye.li at nxp.com>
---
 board/freescale/imx8mp_evk/imx8mp_evk.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c b/board/freescale/imx8mp_evk/imx8mp_evk.c
index 89cc17c..bc4753c 100644
--- a/board/freescale/imx8mp_evk/imx8mp_evk.c
+++ b/board/freescale/imx8mp_evk/imx8mp_evk.c
@@ -101,9 +101,10 @@ int board_init(void)
 
 	if (CONFIG_IS_ENABLED(FEC_MXC)) {
 		setup_fec();
+	}
 
-		if (CONFIG_IS_ENABLED(DWC_ETH_QOS))
-			ret = setup_eqos();
+	if (CONFIG_IS_ENABLED(DWC_ETH_QOS)) {
+		ret = setup_eqos();
 	}
 
 	return ret;
-- 
2.7.4