[PATCH v7 0/5] Add SIMATIC IOT2050 board support

[Jan Kiszka]

This is the baseline support for the SIMATIC IOT2050 devices.

Changes in v7:
 - rebased
 - registered board doc with index

Changes in v6:
 - rebased
 - converted board README to docs/board/siemens/iot2050.rst

Changes in v5:
 - rebased
 - use DEFAULT_LINUX_BOOT_ENV from ti_armv7_common.h, rather than
   home-grown values
    - avoids misaligned kernel load address
    - no longer exposes issue around LMB reservations

Changes in v4:
 - rebased
 - make rtd-wdt firmware a "loadable" inside U-Boot proper fit image,
   avoiding controversial embedding as object
 - improved mmc1 removal from boot_targets
 - fixed various build issues

Changes in v3:
 - rebased
 - addressed several checkpatch warnings
    - a few #ifdef -> IS_ENABLED conversions
    - comment marker for SPDK identifier in .S file
    - trailing whitespaces
 - factored out rti_wdt_load_fw (less #ifdef)

Changes in v2:
 - rebased
 - sync with upstream-accepted DT
 - add boot switch
 - include watchdog support

Allows to boot mainline 5.10 kernels, but not the original BSP-derived
kernel we currently ship as reference. This is due to the TI sysfw ABI
breakages between 2.x and 3.x. We will soon provide a transitional
kernel that allows booting both firmware ABIs - as long as full upstream
kernel support is work in progress.

Note that this baseline support lacks Ethernet drivers. We are working
closely with TI to ensure that the to-be-upstreamed icssg-prueth driver
will work both with new SR2.0 AM65x silicon as well as with SR1.0 which
is used in the currently shipped IOT2050 devices.

A staging tree for complete IOT2050 support can be found at [1]. Full
image integration is available via [2].

Jan

[1] https://github.com/siemens/u-boot/commits/jan/iot2050
[2] https://github.com/siemens/meta-iot2050

Jan Kiszka (5):
  arm: dts: Add IOT2050 device tree files
  board: siemens: Add support for SIMATIC IOT2050 devices
  arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
  watchdog: rti_wdt: Add support for loading firmware
  iot2050: Enable watchdog support, but do not auto-start it

 arch/arm/dts/Makefile                         |   7 +-
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 121 ++++
 .../dts/k3-am65-iot2050-common-u-boot.dtsi    | 103 +++
 arch/arm/dts/k3-am65-iot2050-common.dtsi      | 655 ++++++++++++++++++
 arch/arm/dts/k3-am65-iot2050-spl.dts          |  16 +
 arch/arm/dts/k3-am65-mcu.dtsi                 |   9 +
 arch/arm/dts/k3-am6528-iot2050-basic.dts      |  67 ++
 arch/arm/dts/k3-am6548-iot2050-advanced.dts   |  66 ++
 arch/arm/mach-k3/Kconfig                      |   1 +
 board/siemens/iot2050/Kconfig                 |  32 +
 board/siemens/iot2050/MAINTAINERS             |   9 +
 board/siemens/iot2050/Makefile                |  10 +
 board/siemens/iot2050/board.c                 | 284 ++++++++
 board/siemens/iot2050/config.mk               |   8 +
 configs/iot2050_defconfig                     | 138 ++++
 doc/board/index.rst                           |   1 +
 doc/board/siemens/index.rst                   |   9 +
 doc/board/siemens/iot2050.rst                 |  76 ++
 drivers/watchdog/Kconfig                      |  20 +
 drivers/watchdog/rti_wdt.c                    |  88 +++
 include/configs/iot2050.h                     |  62 ++
 21 files changed, 1781 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts
 create mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts
 create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts
 create mode 100644 board/siemens/iot2050/Kconfig
 create mode 100644 board/siemens/iot2050/MAINTAINERS
 create mode 100644 board/siemens/iot2050/Makefile
 create mode 100644 board/siemens/iot2050/board.c
 create mode 100644 board/siemens/iot2050/config.mk
 create mode 100644 configs/iot2050_defconfig
 create mode 100644 doc/board/siemens/index.rst
 create mode 100644 doc/board/siemens/iot2050.rst
 create mode 100644 include/configs/iot2050.h

-- 
2.31.1