[PATCH] arm64: zynqmp: Print the secure boot status information in EL3

Jorge Ramirez-Ortiz, Foundries jorge at foundries.io
Fri Aug 27 11:20:08 CEST 2021


On 12/08/21, Michal Simek wrote:
> 
> 
> On 7/22/21 1:19 PM, Jorge Ramirez-Ortiz wrote:
> > Confirm the secure boot configuration on the console.
> > 
> > Signed-off-by: Jorge Ramirez-Ortiz <jorge at foundries.io>
> > ---
> >  arch/arm/mach-zynqmp/include/mach/hardware.h |  3 ++-
> >  board/xilinx/zynqmp/zynqmp.c                 | 16 +++++++++++++++-
> >  2 files changed, 17 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
> > index 3776499070..3d3ffa086e 100644
> > --- a/arch/arm/mach-zynqmp/include/mach/hardware.h
> > +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
> > @@ -139,7 +139,8 @@ struct apu_regs {
> >  #define ZYNQMP_SILICON_VER_SHIFT	0
> >  
> >  struct csu_regs {
> > -	u32 reserved0[4];
> > +	u32 status;
> > +	u32 reserved0[3];
> >  	u32 multi_boot;
> >  	u32 reserved1[11];
> >  	u32 idcode;
> > diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
> > index 1748fec2e4..b7d11630d1 100644
> > --- a/board/xilinx/zynqmp/zynqmp.c
> > +++ b/board/xilinx/zynqmp/zynqmp.c
> > @@ -355,6 +355,18 @@ static int multi_boot(void)
> >  	return 0;
> >  }
> >  
> > +static void secure_boot(void)
> > +{
> > +	u32 status;
> > +
> > +	status = readl(&csu_base->status);
> > +	if (status & (BIT(0) | BIT(1))) {
> 
> please create macros for these bits.

ok
> 
> {} around are not needed.

yep

> 
> 
> > +		printf("Secure Boot:\t%s%s\n",
> > +		       status & BIT(0) ? "authenticated" : "not authenticated",
> > +		       status & BIT(1) ? ", encrypted" : ", not encrypted");
> 
> Isn't this more space efficient?
> printf("Secure Boot:\t%sauthenticated, %sencrypted\n",
> 	       status & BIT(0) ? "" : "not ",
> 	       status & BIT(1) ? "" : "not ");
> 
> And as I see it is.
> aarch64: (for 1/1 boards) all -33.0 rodata -17.0 spl/u-boot-spl:all
> -33.0 spl/u-boot-spl:rodata -17.0 spl/u-boot-spl:text -16.0 text -16.0
>             xilinx_zynqmp_virt: all -33 rodata -17 spl/u-boot-spl:all
> -33 spl/u-boot-spl:rodata -17 spl/u-boot-spl:text -16 text -16
>                spl-u-boot-spl: add: 0/0, grow: 0/-1 bytes: 0/-16 (-16)
> 
>

ok with me

> > +	}
> > +}
> > +
> >  #define PS_SYSMON_ANALOG_BUS_VAL	0x3210
> >  #define PS_SYSMON_ANALOG_BUS_REG	0xFFA50914
> >  
> > @@ -391,8 +403,10 @@ int board_init(void)
> >  	fpga_add(fpga_xilinx, &zynqmppl);
> >  #endif
> >  
> > -	if (current_el() == 3)
> > +	if (current_el() == 3) {
> >  		multi_boot();
> > +		secure_boot();
> > +	}
> 
> Please take a look at
> https://lists.denx.de/pipermail/u-boot/2021-July/456382.html
> I have changed multi_boot function a little bit.

ok

> 
> Thanks,
> Michal
> 
> -- 
> Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
> w: www.monstr.eu p: +42-0-721842854
> Maintainer of Linux kernel - Xilinx Microblaze
> Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
> U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
> 


More information about the U-Boot mailing list