[PATCH] arm64: zynqmp: Print the secure boot status information in EL3

Michal Simek monstr at monstr.eu
Thu Aug 12 07:29:48 CEST 2021



On 7/22/21 1:19 PM, Jorge Ramirez-Ortiz wrote:
> Confirm the secure boot configuration on the console.
> 
> Signed-off-by: Jorge Ramirez-Ortiz <jorge at foundries.io>
> ---
>  arch/arm/mach-zynqmp/include/mach/hardware.h |  3 ++-
>  board/xilinx/zynqmp/zynqmp.c                 | 16 +++++++++++++++-
>  2 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
> index 3776499070..3d3ffa086e 100644
> --- a/arch/arm/mach-zynqmp/include/mach/hardware.h
> +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
> @@ -139,7 +139,8 @@ struct apu_regs {
>  #define ZYNQMP_SILICON_VER_SHIFT	0
>  
>  struct csu_regs {
> -	u32 reserved0[4];
> +	u32 status;
> +	u32 reserved0[3];
>  	u32 multi_boot;
>  	u32 reserved1[11];
>  	u32 idcode;
> diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
> index 1748fec2e4..b7d11630d1 100644
> --- a/board/xilinx/zynqmp/zynqmp.c
> +++ b/board/xilinx/zynqmp/zynqmp.c
> @@ -355,6 +355,18 @@ static int multi_boot(void)
>  	return 0;
>  }
>  
> +static void secure_boot(void)
> +{
> +	u32 status;
> +
> +	status = readl(&csu_base->status);
> +	if (status & (BIT(0) | BIT(1))) {

please create macros for these bits.

{} around are not needed.


> +		printf("Secure Boot:\t%s%s\n",
> +		       status & BIT(0) ? "authenticated" : "not authenticated",
> +		       status & BIT(1) ? ", encrypted" : ", not encrypted");

Isn't this more space efficient?
printf("Secure Boot:\t%sauthenticated, %sencrypted\n",
	       status & BIT(0) ? "" : "not ",
	       status & BIT(1) ? "" : "not ");

And as I see it is.
aarch64: (for 1/1 boards) all -33.0 rodata -17.0 spl/u-boot-spl:all
-33.0 spl/u-boot-spl:rodata -17.0 spl/u-boot-spl:text -16.0 text -16.0
            xilinx_zynqmp_virt: all -33 rodata -17 spl/u-boot-spl:all
-33 spl/u-boot-spl:rodata -17 spl/u-boot-spl:text -16 text -16
               spl-u-boot-spl: add: 0/0, grow: 0/-1 bytes: 0/-16 (-16)


> +	}
> +}
> +
>  #define PS_SYSMON_ANALOG_BUS_VAL	0x3210
>  #define PS_SYSMON_ANALOG_BUS_REG	0xFFA50914
>  
> @@ -391,8 +403,10 @@ int board_init(void)
>  	fpga_add(fpga_xilinx, &zynqmppl);
>  #endif
>  
> -	if (current_el() == 3)
> +	if (current_el() == 3) {
>  		multi_boot();
> +		secure_boot();
> +	}

Please take a look at
https://lists.denx.de/pipermail/u-boot/2021-July/456382.html
I have changed multi_boot function a little bit.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs



More information about the U-Boot mailing list