[PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery

[Tom Warren]

> The rest of that series which was i.MX specific was already applied by Stefano. So if you could take this one as a singleton that would be great. Thanks!
Will do, but it won't happen until at least next Monday as I'm OOTO til then.

Tom
--
nvpublic

-----Original Message-----
From: Marcel Ziswiler <marcel.ziswiler at toradex.com> 
Sent: Wednesday, August 11, 2021 12:56 PM
To: u-boot at lists.denx.de; Tom Warren <TWarren at nvidia.com>; sbabic at denx.de
Cc: sjg at chromium.org; Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Subject: Re: [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery

External email: Use caution opening links or attachments


On Wed, 2021-08-11 at 16:45 +0000, Tom Warren wrote:
> I'm fine with someone else taking this tegra patch in if it's part of 
> a larger series. If not, let me know and I'll take it as a singleton.

The rest of that series which was i.MX specific was already applied by Stefano. So if you could take this one as a singleton that would be great. Thanks!

> Tom

Cheers

Marcel

> --
> nvpublic
>
> -----Original Message-----
> From: Stefano Babic <sbabic at denx.de>
> Sent: Wednesday, August 11, 2021 6:24 AM
> To: Marcel Ziswiler <marcel at ziswiler.com>; u-boot at lists.denx.de
> Cc: Stefano Babic <sbabic at denx.de>; Simon Glass <sjg at chromium.org>; 
> Marcel Ziswiler <marcel.ziswiler at toradex.com>; Oleksandr Suvorov 
> <oleksandr.suvorov at toradex.com>; Tom Warren <TWarren at nvidia.com>
> Subject: Re: [PATCH v3] board: apalis-tk1: launch toradex easy 
> installer in usb recovery
>
> External email: Use caution opening links or attachments
>
>
> Hallo Marcel,
>
> On 11.08.21 15:12, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> >
> > The USB recovery mode is used by Toradex to load the Toradex Easy 
> > Installer image which supports further system images installation.
> > Prepare for loading and launching the Toradex Easy Installer if the 
> > USB Recovery mode is activated.
> >
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
> >
> > ---
> >
>
> Added Tom in CC as he's in charge for Tegra (I have just reviewed V2 because it was part of i.MX series).
>
> Best regards,
> Stefano
>
> > Changes in v3:
> > - Switch very long lines to multiline to make checkpatch happy as
> >    suggested by Stefano.
> >
> >   board/toradex/apalis-tk1/apalis-tk1.c | 20 ++++++++++++++++++--
> >   1 file changed, 18 insertions(+), 2 deletions(-)
> >
> > diff --git a/board/toradex/apalis-tk1/apalis-tk1.c
> > b/board/toradex/apalis-tk1/apalis-tk1.c
> > index b97617cfca3..2769b546010 100644
> > --- a/board/toradex/apalis-tk1/apalis-tk1.c
> > +++ b/board/toradex/apalis-tk1/apalis-tk1.c
> > @@ -38,8 +38,24 @@
> >   int arch_misc_init(void)
> >   {
> >       if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
> > -         NVBOOTTYPE_RECOVERY)
> > -             printf("USB recovery mode\n");
> > +         NVBOOTTYPE_RECOVERY) {
> > +             printf("USB recovery mode, attempting to boot Toradex Easy "
> > +                    "Installer\n");
> > +             env_set("bootdelay", "-2");
> > +             env_set("defargs", "pcie_aspm=off user_debug=30");
> > +             env_set("fdt_high", "");
> > +             env_set("initrd_high", "");
> > +
> > +             env_set("setup", "env set setupargs igb_mac=${ethaddr} "
> > +                     "consoleblank=0 no_console_suspend=1 "
> > +                     "console=${console},${baudrate}n8 ${memargs}");
> > +             env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet "
> > +                     "autoinstall");
> > +             env_set("vidargs", "video=HDMI-A-1:640x480-16 at 60D");
> > +             env_set("bootcmd", "run setup; env set bootargs ${defargs} "
> > +                     "${setupargs} ${vidargs} ${teziargs}; bootm 0x80208000"
> > +                     "#config@${soc}-${fdt_module}-${fdt_board}.dtb");
> > +     }
> >
> >       /* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */
> >       gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication");