[PATCH u-boot-marvell 00/29] kwboot higher baudrate

[Chris Packham]

On Fri, Aug 27, 2021 at 1:39 PM Marek Behún <marek.behun at nic.cz> wrote:
>
> On Fri, 27 Aug 2021 13:16:25 +1200
> Chris Packham <judge.packham at gmail.com> wrote:
>
> > On Thu, Aug 26, 2021 at 1:46 AM Marek Behún <marek.behun at nic.cz> wrote:
> > >
> > > Hello Stefan and others,
> > >
> > > this series adds support for booting Marvell platforms via UART (those
> > > bootable with kwboot) at higher baudrates.
> > >
> > > Tested on Turris Omnia up to 5.15 MBd, which is 44x faster than
> > > 115200 Bd.
> > >
> > > The user can direct kwboot to use higher baudrate via the -B option.
> > > (BTW this option was there before but did not work with the -b option.)
> > >
> > > Only the payload part of the KWB image is uploaded at this higher
> > > baudrate. The header part is still uploaded at 115200 Bd, since the code
> > > that changes baudrate is injected into header as a binary extension.
> > > (The payload part makes up majority of the binary, though. On Turris
> > >  Omnia the payload currently makes ~87%.)
> > >
> > > The series also contains various other fixes, refactors and improvements
> > > of the code, upon which the main change is done.
> > >
> > > Marek & Pali
> >
> > What tree/sha is this series based on. I've tried to apply them out of
> > patchwork and it fails at "tools: kwbimage: Simplify iteration over
> > version 1 optional headers"
>
> Applies to master and to u-boot-marvell, but you need the 6
> additional patches for kwbimage/kwboot that are on patchwork
> but not yet applied to u-boot-marvell:
>   https://patchwork.ozlabs.org/project/uboot/list/?series=257577
>   https://patchwork.ozlabs.org/project/uboot/patch/20210817050320.11983-1-xypron.glpk@gmx.de/
>   https://patchwork.ozlabs.org/project/uboot/patch/20210817051158.13283-1-xypron.glpk@gmx.de/
>
> Also some more fixes were yet needed, which I will sent in v2.
>
> To make it simpler for you I pushed v2 into
>   https://gitlab.nic.cz/turris/turris-omnia-uboot
> branch
>   kwboot-baudrate-improvements
>

Thanks. I took it for a spin on the x530. In terms of regression
testing the default behaviour is good.

The higher speed settings weren't so good. I started with 3125000 and
that doesn't get onto the 2nd part of the download, same for 1152000
and 4000000 (I stopped trying higher speeds at that point). Using
230400 and 460800 it does make it through the 2nd part of the download
but when I go back on to the console it appears to be unresponsive.

All of this could be down to the serial hardware in my system (the
x530 uses a real RS232 interface not a TTL) and I have had problems
with the MosChip USB-Serial adapter in my test PC in the past. I
wouldn't reject this series based on me not being able to get it
working, the important thing for me is the default behaviour at the
standard baudrate which is good.

One usability thing I'd like to see is retaining support for -t (I use
that quite a lot when recovering a system). Ideally we'd still be able
to drop into the console at 115200 once the download is complete.


> Marek