[PATCH 09/23] sata: Rename SATA_SUPPORT to SATA

Simon Glass sjg at chromium.org
Sun Aug 8 20:20:17 CEST 2021 

Rename this options so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/mach-mvebu/Kconfig      |  2 +-
 arch/arm/mach-mvebu/spl.c        | 10 +++++-----
 arch/arm/mach-zynqmp/spl.c       |  2 +-
 arch/powerpc/cpu/mpc83xx/Kconfig |  4 ++--
 common/spl/Kconfig               |  6 +++---
 common/spl/Makefile              |  2 +-
 drivers/Makefile                 |  2 +-
 drivers/scsi/Makefile            |  2 +-
 include/configs/imx6_spl.h       |  2 +-
 9 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 345faf93581..a2c29a4b29b 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -272,7 +272,7 @@ config MVEBU_SPL_BOOT_DEVICE_MMC
 
 config MVEBU_SPL_BOOT_DEVICE_SATA
 	bool "SATA"
-	imply SPL_SATA_SUPPORT
+	imply SPL_SATA
 	imply SPL_LIBDISK_SUPPORT
 	select SPL_BOOTROM_SUPPORT
 
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 65ee79c0300..effcf07f843 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -18,7 +18,7 @@
 #include <asm/arch/soc.h>
 
 #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC) || \
-	defined(CONFIG_SPL_SATA_SUPPORT)
+	defined(CONFIG_SPL_SATA)
 
 /*
  * When loading U-Boot via SPL from SPI NOR, CONFIG_SYS_SPI_U_BOOT_OFFS must
@@ -57,7 +57,7 @@
  * stored at sector 1. Therefore CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be
  * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
  */
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
 #if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
 #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
 #endif
@@ -122,7 +122,7 @@ int spl_parse_board_header(struct spl_image_info *spl_image,
 #ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
 	     mhdr->blockid != IBR_HDR_SPI_ID &&
 #endif
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
 	     mhdr->blockid != IBR_HDR_SATA_ID &&
 #endif
 #ifdef CONFIG_SPL_MMC
@@ -136,7 +136,7 @@ int spl_parse_board_header(struct spl_image_info *spl_image,
 
 	spl_image->offset = mhdr->srcaddr;
 
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
 	/*
 	 * For SATA srcaddr is specified in number of sectors.
 	 * The main header is must be stored at sector number 1.
@@ -266,7 +266,7 @@ u32 spl_boot_device(void)
 	case BOOT_DEVICE_MMC1:
 		return BOOT_DEVICE_MMC1;
 #endif
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
 	case BOOT_FROM_SATA:
 		return BOOT_FROM_SATA;
 #endif
diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index c3a99041b07..6b836cbff2d 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -100,7 +100,7 @@ u32 spl_boot_device(void)
 	case USB_MODE:
 		return BOOT_DEVICE_DFU;
 #endif
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
 	case SW_SATA_MODE:
 		return BOOT_DEVICE_SATA;
 #endif
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 083febe5bb3..2a5e66b7941 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -119,7 +119,7 @@ config MPC83XX_PCIE2_SUPPORT
 config MPC83XX_SDHC_SUPPORT
 	bool
 
-config MPC83XX_SATA_SUPPORT
+config MPC83XX_SATA
 	bool
 
 config MPC83XX_SECOND_I2C
@@ -193,7 +193,7 @@ config ARCH_MPC837X
 	select MPC83XX_PCIE1_SUPPORT
 	select MPC83XX_PCIE2_SUPPORT
 	select MPC83XX_SDHC_SUPPORT
-	select MPC83XX_SATA_SUPPORT
+	select MPC83XX_SATA
 	select MPC83XX_LDP_PIN
 	select MPC83XX_SECOND_I2C
 	select FSL_ELBC
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index f9abdca275b..1ce74d07618 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -196,7 +196,7 @@ config SPL_BOOTCOUNT_LIMIT
 
 config SPL_RAW_IMAGE_SUPPORT
 	bool "Support SPL loading and booting of RAW images"
-	default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA_SUPPORT))
+	default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA))
 	default y if !TI_SECURE_DEVICE
 	help
 	  SPL will support loading and booting a RAW image when this option
@@ -1080,7 +1080,7 @@ config SPL_RTC
 	  needed. This enables the drivers in drivers/rtc as part of an SPL
 	  build.
 
-config SPL_SATA_SUPPORT
+config SPL_SATA
 	bool "Support loading from SATA"
 	help
 	  Enable support for SATA (Serial AT attachment) in SPL. This allows
@@ -1092,7 +1092,7 @@ config SPL_SATA_SUPPORT
 
 config SPL_SATA_RAW_U_BOOT_USE_SECTOR
 	bool "SATA raw mode: by sector"
-	depends on SPL_SATA_SUPPORT
+	depends on SPL_SATA
 	default y if ARCH_MVEBU
 	help
 	  Use sector number for specifying U-Boot location on SATA disk in
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 29ac624f9a0..40107e39bde 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o
 obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
 obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
 obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
-obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
+obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o
 obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
 obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
 obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
diff --git a/drivers/Makefile b/drivers/Makefile
index ad2ce1e1218..3709cf781d8 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
-obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
+obj-$(CONFIG_SPL_SATA) += ata/ scsi/
 obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 6fc5f4a9f9c..e9f848636c6 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_SCSI) += scsi.o
 endif
 
 ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_SATA_SUPPORT
+ifdef CONFIG_SPL_SATA
 obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
 obj-$(CONFIG_SCSI) += scsi.o
 endif
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index b5d50333dda..234aacb3b91 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -59,7 +59,7 @@
 #endif
 
 /* SATA support */
-#if defined(CONFIG_SPL_SATA_SUPPORT)
+#if defined(CONFIG_SPL_SATA)
 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
 #endif
-- 
2.32.0.605.g8dce9f2422-goog

More information about the U-Boot mailing list