[PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support
Gérald Kerma
gandalf at gk2.net
Mon Aug 16 11:47:42 CEST 2021
Héllo Luka,
Le 16/08/2021 à 10:50, Luka Kovacic a écrit :
> Hello Gerald,
>
> On Sat, Aug 14, 2021 at 9:59 AM Gérald Kerma <gandalf at gk2.net> wrote:
>> Héllo,
>>> Message: 2
>>> Date: Fri, 13 Aug 2021 12:03:57 +0200
>>> From: Luka Kovacic<luka.kovacic at sartura.hr>
>>> To: Pali Roh?r<pali at kernel.org>
>>> Cc:u-boot at lists.denx.de, Robert Marko<robert.marko at sartura.hr>,
>>> Luka Perkov<luka.perkov at sartura.hr>, Marek Behun
>>> <marek.behun at nic.cz>,sr at denx.de,sjg at chromium.org,
>>> patrick.delaunay at foss.st.com,xypron.glpk at gmx.de
>>> Subject: Re: [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra
>>> board support
>>> Message-ID:
>>> <CADZsf3buKpgUJq_2yP1zakQbf0Hoq_4oPLdi69_d+qoR+Hbn0w at mail.gmail.com>
>>> Content-Type: text/plain; charset="UTF-8"
>>>
>>> Hello Pali,
>>>
>>> On Fri, Aug 13, 2021 at 11:27 AM Pali Roh?r<pali at kernel.org> wrote:
>>>> On Friday 13 August 2021 01:39:38 Luka Kovacic wrote:
>>>>> Add initial support for the ESPRESSOBin-Ultra board from Globalscale
>>>>> Technologies, Inc.
>>>>>
>>>>> The board is based on the 64-bit dual-core Marvell Armada 3720 SoC.
>>>>> Peripherals:
>>>>> - 5 Gigabit Ethernet ports (WAN has PoE, up to 30W, Topaz 6341 switch)
>>>>> - RTC clock (PCF8563)
>>>>> - USB 3.0 port
>>>>> - USB 2.0 port
>>>>> - 4x LED
>>>>> - UART over Micro-USB
>>>>> - M.2 slot (2280)
>>>>> - Mini PCI-E slot
>>>>>
>>>>> Additionally, automatic import of the Marvell hw_info parameters is
>>>>> enabled via the recently added mac command for A37XX platforms.
>>>>> The parameters stored in Marvell hw_info are usually the board serial
>>>>> number and MAC addresses.
>>>>>
>>>>> Signed-off-by: Luka Kovacic<luka.kovacic at sartura.hr>
>>>>> Cc: Luka Perkov<luka.perkov at sartura.hr>
>>>>> Cc: Robert Marko<robert.marko at sartura.hr>
>>>>> ---
>>>>> arch/arm/dts/Makefile | 1 +
>>>>> .../arm/dts/armada-3720-espressobin-ultra.dts | 114 ++++++++++
>>>>> arch/arm/dts/armada-3720-espressobin.dts | 199 +----------------
>>>>> arch/arm/dts/armada-3720-espressobin.dtsi | 210 ++++++++++++++++++
>>>>> board/Marvell/mvebu_armada-37xx/MAINTAINERS | 8 +
>>>>> board/Marvell/mvebu_armada-37xx/board.c | 92 +++++++-
>>>>> .../mvebu_espressobin-ultra-88f3720_defconfig | 93 ++++++++
>>>>> 7 files changed, 514 insertions(+), 203 deletions(-)
>>>>> create mode 100644 arch/arm/dts/armada-3720-espressobin-ultra.dts
>>>>> create mode 100644 arch/arm/dts/armada-3720-espressobin.dtsi
>>>>> create mode 100644 configs/mvebu_espressobin-ultra-88f3720_defconfig
>>>> ...
>> Thanks, all, for this job.
>>
>> I am available for testing (if needed) on EspressoBin V7, with eMMC, and
>> EspressoBin Ultra.
> Thanks for offering your help. Can you test the following patchset
> (v4), when it's out,
> as some implementation issues still have to be resolved here?
Sure...
>> I have issue on EspressoBin Ultra, with the v2 patch for
>> EspressoBin-Ultra, on OpenWrt 21.02-RC, fw_printenv do not works... (CRC
>> Error)
>> I have the same issue with the Marvell (GlobalScale) u-Boot, factory and
>> upgraded version.
> Did you specify the U-Boot environment location correctly in the fw_printenv
> config?
I think so : but It do not works...
root at ULTRA-5G:~# cat /etc/fw_env.config
#/dev/mtd0 0x3f0000 0x10000 0x10000 1
/dev/mtd2 0x0 0x10000 0x10000 1
root at ULTRA-5G:~# fw_printenv
Warning: Bad CRC, using default environment
bootcmd=bootp; setenv bootargs root=/dev/nfs
nfsroot=${serverip}:${rootpath}
ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm
bootdelay=5
baudrate=115200
>> Environments variables are correctly managed from the u-Boot itself.
>>
>> Regards,
>> Gérald Kerma
>>
>> PS : I am only registered to the digest, so I hope my mail will not be
>> disturbing...
> Kind regards,
> Luka
Best regards,
Gérald
More information about the U-Boot
mailing list