[PATCH v5 2/5] board: siemens: Add support for SIMATIC IOT2050 devices

[Jan Kiszka]

On 02.08.21 17:47, Tom Rini wrote:
> On Mon, Aug 02, 2021 at 05:21:13PM +0200, Jan Kiszka wrote:
> 
>> From: Jan Kiszka <jan.kiszka at siemens.com>
>>
>> This adds support for the IOT2050 Basic and Advanced devices. The Basic
>> used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS
>> quad-core version.
>>
>> Both variants are booted via a Siemens-provided FSBL that runs on the R5
>> cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot
>> SPL, ATF and TEE have to reside in SPI flash.
>>
>> Full integration into a bootable image can be found on
>> https://github.com/siemens/meta-iot2050
>>
>> Based on original board support by Le Jin, Gao Nian and Chao Zeng.
>>
>> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
>> ---
>>  arch/arm/mach-k3/Kconfig          |   1 +
>>  board/siemens/iot2050/Kconfig     |  32 ++++
>>  board/siemens/iot2050/MAINTAINERS |   8 +
>>  board/siemens/iot2050/Makefile    |  10 ++
>>  board/siemens/iot2050/README      |  65 +++++++
> 
> This needs to be an rST and under doc/board/ now.
> 

Okay.

Anything else before rolling out v6?

> [snip]
>> diff --git a/board/siemens/iot2050/config.mk b/board/siemens/iot2050/config.mk
>> new file mode 100644
>> index 0000000000..267ec76c4e
>> --- /dev/null
>> +++ b/board/siemens/iot2050/config.mk
>> @@ -0,0 +1,8 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (c) Siemens AG, 2020-2021
>> +#
>> +# Authors:
>> +#   Jan Kiszka <jan.kiszka at siemens.com>
>> +
>> +flash.bin: all
> 
> Do we need this file?  Thanks!
> 

Yes, this ensured building the required flash.bin image by default.
Other artifacts are not useful on the board.

Jan

-- 
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux