[PATCH V3] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash
Marek Vasut
marex at denx.de
Tue Aug 31 00:41:38 CEST 2021
On 8/30/21 10:57 PM, Adam Ford wrote:
> On Tue, Aug 24, 2021 at 1:04 PM Marek Vasut <marex at denx.de> wrote:
>>
>> On 8/24/21 6:05 PM, Adam Ford wrote:
>>> There is a QSPI NOR flash part on the board. Because this chip isn't
>>> yet supported in Linux, but it is supported in U-Boot, and the
>>> face that the RPC_SPI compatible names are different in U-Boot and
>>> Linux, the device tree updates are confined to -u-boot.dtsi files.
>>>
>>> In order to use the QSPI, TF-A must leave RPC unlocked by compiling
>>> TF-A with RZG_RPC_HYPERFLASH_LOCKED=0.
>>>
>>> Signed-off-by: Adam Ford <aford173 at gmail.com>
>>> Reviewed-by: Biju Bas <biju.das.jz at bp.renesas.com>
>>> ---
>>> V3: Rebase, and combine into som.dsti file
>>> V2: Add note to commit message about TF-A
>>> No functional changes
>>>
>>> diff --git a/arch/arm/dts/beacon-renesom-som.dtsi b/arch/arm/dts/beacon-renesom-som.dtsi
>>> index 9565495b49..d30bab3c8b 100644
>>> --- a/arch/arm/dts/beacon-renesom-som.dtsi
>>> +++ b/arch/arm/dts/beacon-renesom-som.dtsi
>>> @@ -7,6 +7,10 @@
>>> #include <dt-bindings/clk/versaclock.h>
>>>
>>> / {
>>> + aliases {
>>> + spi0 = &rpc;
>>> + };
>>> +
>>> memory at 48000000 {
>>> device_type = "memory";
>>> /* first 128MB is reserved for secure area. */
>>> @@ -275,6 +279,25 @@
>>> };
>>> };
>>>
>>> +&rpc {
>>> + compatible = "renesas,rcar-gen3-rpc";
>>> + num-cs = <1>;
>>> + spi-max-frequency = <40000000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + status = "okay";
>>> +
>>> + flash0: spi-flash at 0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + reg = <0>;
>>> + compatible = "spi-flash", "jedec,spi-nor";
>>> + spi-max-frequency = <40000000>;
>>> + spi-tx-bus-width = <1>;
>>> + spi-rx-bus-width = <1>;
>>> + };
>>> +};
>>> +
>>> &scif_clk {
>>> clock-frequency = <14745600>;
>>> };
>>> diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig
>>> index 23c423060d..7ba4ac05f5 100644
>>> --- a/configs/r8a774a1_beacon_defconfig
>>> +++ b/configs/r8a774a1_beacon_defconfig
>>> @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y
>>> CONFIG_CMD_GPIO=y
>>> CONFIG_CMD_I2C=y
>>> CONFIG_CMD_MMC=y
>>> +CONFIG_CMD_MTD=y
>>> CONFIG_CMD_PART=y
>>> +CONFIG_CMD_SPI=y
>>> CONFIG_CMD_USB=y
>>> CONFIG_CMD_DHCP=y
>>> CONFIG_CMD_MII=y
>>> @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y
>>> CONFIG_MMC_UHS_SUPPORT=y
>>> CONFIG_MMC_HS200_SUPPORT=y
>>> CONFIG_RENESAS_SDHI=y
>>> +CONFIG_MTD=y
>>> +CONFIG_DM_MTD=y
>>> +CONFIG_DM_SPI_FLASH=y
>>> +CONFIG_SPI_FLASH_WINBOND=y
>>
>> Applied, but see my comment regarding all those duplicate config options
>> under [PATCH 1/2] ARM: rmobile: beacon-renesom: Enable USB and ethernet
>> ref clocks
>
> what repo do you use? i am not sure where to look. i want to add more
> stuff, but i want to make sure i have the proper starting point.
git://source.denx.de/u-boot-sh.git master
More information about the U-Boot
mailing list