[PATCH v1 5/7] verdin-imx8mm: switch to use binman to pack images
Heiko Thiery
heiko.thiery at gmail.com
Mon Aug 23 08:37:11 CEST 2021
Hi Marcel,
Am Fr., 20. Aug. 2021 um 22:52 Uhr schrieb Marcel Ziswiler
<marcel at ziswiler.com>:
>
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
> Use binman to pack images.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> ---
>
> arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 122 ++++++++++++++++++++++-
> arch/arm/mach-imx/imx8m/Kconfig | 1 +
> board/toradex/verdin-imx8mm/imximage.cfg | 11 +-
> configs/verdin-imx8mm_defconfig | 2 +-
> doc/board/toradex/verdin-imx8mm.rst | 54 +++++-----
> 5 files changed, 155 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
> index a97626fa0c1..ba4c8d0436c 100644
> --- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
> @@ -1,11 +1,15 @@
> // SPDX-License-Identifier: GPL-2.0+ OR MIT
> /*
> - * Copyright 2020 Toradex
> + * Copyright 2021 Toradex
> */
>
> #include "imx8mm-u-boot.dtsi"
>
> / {
> + binman: binman {
> + multiple-images;
> + };
> +
> firmware {
> optee {
> compatible = "linaro,optee-tz";
> @@ -91,3 +95,119 @@
> &wdog1 {
> u-boot,dm-spl;
> };
> +
> +&binman {
> + u-boot-spl-ddr {
> + align = <4>;
> + align-size = <4>;
> + filename = "u-boot-spl-ddr.bin";
> + pad-byte = <0xff>;
> +
> + u-boot-spl {
> + align-end = <4>;
> + };
> +
> + blob_1: blob-ext at 1 {
> + filename = "lpddr4_pmu_train_1d_imem.bin";
> + size = <0x8000>;
> + };
> +
> + blob_2: blob-ext at 2 {
> + filename = "lpddr4_pmu_train_1d_dmem.bin";
> + size = <0x4000>;
> + };
> +
> + blob_3: blob-ext at 3 {
> + filename = "lpddr4_pmu_train_2d_imem.bin";
> + size = <0x8000>;
> + };
> +
> + blob_4: blob-ext at 4 {
> + filename = "lpddr4_pmu_train_2d_dmem.bin";
> + size = <0x4000>;
> + };
> + };
> +
> + spl {
Maybe you can add a "filename = spl.bin" property here. So it is more
clear that this is the output file. This should be the one you refer
to in your "board/toradex/verdin-imx8mm/imximage.cfg".
> + mkimage {
> + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
> +
> + blob {
> + filename = "u-boot-spl-ddr.bin";
> + };
> + };
> + };
> +
> + itb {
> + filename = "u-boot.itb";
> +
> + fit {
> + description = "Configuration to load ATF before U-Boot";
> + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> + #address-cells = <1>;
> +
> + images {
> + uboot {
> + arch = "arm64";
> + compression = "none";
> + description = "U-Boot (64-bit)";
> + load = <CONFIG_SYS_TEXT_BASE>;
> + type = "standalone";
> +
> + uboot_blob: blob-ext {
> + filename = "u-boot-nodtb.bin";
> + };
> + };
> +
> + atf {
> + arch = "arm64";
> + compression = "none";
> + description = "ARM Trusted Firmware";
> + entry = <0x920000>;
> + load = <0x920000>;
> + type = "firmware";
> +
> + atf_blob: blob-ext {
> + filename = "bl31.bin";
> + };
> + };
> +
> + fdt {
> + compression = "none";
> + description = "NAME";
> + type = "flat_dt";
> +
> + uboot_fdt_blob: blob-ext {
> + filename = "u-boot.dtb";
> + };
> + };
> + };
> +
> + configurations {
> + default = "conf";
> +
> + conf {
> + description = "NAME";
> + fdt = "fdt";
> + firmware = "uboot";
> + loadables = "atf";
> + };
> + };
> + };
> + };
> +
> + imx-boot {
> + filename = "flash.bin";
> + pad-byte = <0x00>;
> +
> + spl: blob-ext at 1 {
> + filename = "spl.bin";
> + offset = <0x0>;
> + };
> +
> + uboot: blob-ext at 2 {
> + filename = "u-boot.itb";
> + offset = <0x5fc00>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
> index a2ba30cf332..3eccc6b4d4f 100644
> --- a/arch/arm/mach-imx/imx8m/Kconfig
> +++ b/arch/arm/mach-imx/imx8m/Kconfig
> @@ -106,6 +106,7 @@ config TARGET_PICO_IMX8MQ
>
> config TARGET_VERDIN_IMX8MM
> bool "Support Toradex Verdin iMX8M Mini module"
> + select BINMAN
> select IMX8MM
> select SUPPORT_SPL
> select IMX8M_LPDDR4
> diff --git a/board/toradex/verdin-imx8mm/imximage.cfg b/board/toradex/verdin-imx8mm/imximage.cfg
> index b8b25ff4201..9bd60e39fb5 100644
> --- a/board/toradex/verdin-imx8mm/imximage.cfg
> +++ b/board/toradex/verdin-imx8mm/imximage.cfg
> @@ -1,16 +1,9 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> - * Copyright 2020 Toradex
> + * Copyright 2021 Toradex
> */
>
> #define __ASSEMBLY__
>
> -FIT
> BOOT_FROM emmc_fastboot
> -LOADER spl/u-boot-spl-ddr.bin 0x7E1000
> -SECOND_LOADER u-boot.itb 0x40200000 0x60000
> -
> -DDR_FW lpddr4_pmu_train_1d_imem.bin
> -DDR_FW lpddr4_pmu_train_1d_dmem.bin
> -DDR_FW lpddr4_pmu_train_2d_imem.bin
> -DDR_FW lpddr4_pmu_train_2d_dmem.bin
> +LOADER mkimage.spl.mkimage 0x7E1000
I think you should use "spl.bin" here and not the
"mkimage.spl.mkimage". As far as I understand the mkimage files are
only binman temporary files.
--
Heiko
More information about the U-Boot
mailing list