[PATCH 4/5] ARM: rmobile: Beacon: Remove dead code

[Adam Ford]

There are a few do-nothing functions that can be removed.
Remove them.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/board/beacon/beacon-rzg2m/beacon-rzg2m.c b/board/beacon/beacon-rzg2m/beacon-rzg2m.c
index b3521fcbc1..df6044a429 100644
--- a/board/beacon/beacon-rzg2m/beacon-rzg2m.c
+++ b/board/beacon/beacon-rzg2m/beacon-rzg2m.c
@@ -10,16 +10,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void s_init(void)
-{
-}
-
-/* Kconfig forces this on, so just return 0 */
-int board_early_init_f(void)
-{
-	return 0;
-}
-
 int board_init(void)
 {
 	/* address of boot parameters */
diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig
index 0956b44c06..d2c0d6a96e 100644
--- a/configs/r8a774a1_beacon_defconfig
+++ b/configs/r8a774a1_beacon_defconfig
@@ -13,6 +13,7 @@ CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_DEFAULT_FDT_FILE="r8a774a1-beacon-rzg2m-kit.dtb"
+# CONFIG_BOARD_EARLY_INIT_F is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
-- 
2.25.1