[PATCH 1/4] arm64: rk3399: r4s: correct the LEDS label name

Kever Yang kever.yang at rock-chips.com
Wed Aug 11 12:06:26 CEST 2021


Xiaobo Tian <peterwillcn at gmail.com> 于2021年7月6日周二 下午10:44写道:
>
> Correct the LEDS label name and remove the board type prefix,
> which is actually unnecessary here, removes the redefined system status LED pin.
>
> Signed-off-by: Xiaobo Tian <peterwillcn at gmail.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>  arch/arm/dts/rk3399-nanopi-r4s.dts | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
> index 6f2cf17bf1..7470c26820 100644
> --- a/arch/arm/dts/rk3399-nanopi-r4s.dts
> +++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
> @@ -76,18 +76,17 @@
>  &leds {
>         lan_led: led-1 {
>                 gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> -               label = "nanopi-r4s:green:lan";
> +               label = "green:lan";
>         };
>
>         wan_led: led-2 {
>                 gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> -               label = "nanopi-r4s:green:wan";
> +               label = "green:wan";
>         };
>  };
>
>  &leds_gpio {
>         rockchip,pins =
> -               <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
>                 <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
>                 <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
>  };
> --
> 2.32.0
>


More information about the U-Boot mailing list