[PATCH 6/9] configs: meson64_android: boot android via abootimg

Neil Armstrong narmstrong at baylibre.com
Thu Aug 5 18:21:07 CEST 2021


On 05/08/2021 17:17, Mattijs Korpershoek wrote:
> From: Guillaume La Roque <glaroque at baylibre.com>
> 
> Since Android 10, we are required to use a "dtbo" partition which
> includes the various device-tree overlays [1].
> It's also possible to provide a "dtb" partition.
> 
> This is supported via the "abootimg" command.
> 
> On Yukawa, the assumption is that we have only a "dtbo" partition, which
> includes all board dtbs and their dtbos [2]
> 
> [1] https://source.android.com/devices/architecture/dto/partitions
> [2] https://android.googlesource.com/device/amlogic/yukawa/+/refs/heads/master/build/tasks/dtimages.mk#16
> Signed-off-by: Guillaume La Roque <glaroque at baylibre.com>
> Signed-off-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
>  include/configs/meson64_android.h | 57 ++++++++++++++++++++++++++++++-
>  1 file changed, 56 insertions(+), 1 deletion(-)
> 
> diff --git a/include/configs/meson64_android.h b/include/configs/meson64_android.h
> index 0ce616c17e..358e0a5c71 100644
> --- a/include/configs/meson64_android.h
> +++ b/include/configs/meson64_android.h
> @@ -81,7 +81,59 @@
>  #define RECOVERY_PARTITION "recovery"
>  #endif
>  
> +#if defined(CONFIG_CMD_ABOOTIMG)
> +/*
> + * Prepares complete device tree blob for current board (for Android boot).
> + *
> + * Boot image or recovery image should be loaded into $loadaddr prior to running
> + * these commands. The logic of these commnads is next:
> + *
> + *   1. Read correct DTB for current SoC/board from boot image in $loadaddr
> + *      to $fdtaddr
> + *   2. Merge all needed DTBO for current board from 'dtbo' partition into read
> + *      DTB
> + *   3. User should provide $fdtaddr as 3rd argument to 'bootm'
> + */
> +#define PREPARE_FDT \
> +	"echo Preparing FDT...; " \
> +	"if test $board_name = sei510; then " \
> +		"echo \"  Reading DTB for sei510...\"; " \
> +		"setenv dtb_index 0;" \
> +	"elif test $board_name = sei610; then " \
> +		"echo \"  Reading DTB for sei610...\"; " \
> +		"setenv dtb_index 1;" \
> +	"else " \
> +		"echo Error: Android boot is not supported for $board_name; " \
> +		"exit; " \
> +	"fi; " \
> +	"abootimg get dtb --index=$dtb_index dtb_start dtb_size; " \
> +	"cp.b $dtb_start $fdt_addr_r $dtb_size; " \
> +	"fdt addr $fdt_addr_r  0x80000; " \
> +	"if test $board_name = sei510; then " \
> +		"echo \"  Reading DTBO for sei510...\"; " \
> +		"setenv dtbo_index 0;" \
> +	"elif test $board_name = sei610; then " \
> +		"echo \"  Reading DTBO for sei610...\"; " \
> +		"setenv dtbo_index 1;" \
> +	"else " \
> +		"echo Error: Android boot is not supported for $board_name; " \
> +		"exit; " \
> +	"fi; " \
> +	"part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
> +	"part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
> +	"mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
> +	"echo \"  Applying DTBOs...\"; " \
> +	"adtimg addr $dtboaddr; " \
> +	"adtimg get dt --index=$dtbo_index dtbo0_addr; " \
> +	"fdt apply $dtbo0_addr;" \
> +	"setenv bootargs \"$bootargs androidboot.dtbo_idx=$dtbo_index \";"\
> +
> +#define BOOT_CMD "bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};"
> +
> +#else
> +#define PREPARE_FDT " "
>  #define BOOT_CMD "bootm ${loadaddr};"
> +#endif
>  
>  #define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \
>  	"bootcmd_fastboot=" \
> @@ -153,6 +205,7 @@
>  			"part start mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_start;" \
>  			"part size mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_size;" \
>  			"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
> +				PREPARE_FDT \
>  				"echo Running Android Recovery...;" \
>  				BOOT_CMD \
>  			"fi;" \
> @@ -174,6 +227,7 @@
>  		"part start mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_start;" \
>  		"part size mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_size;" \
>  		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
> +			PREPARE_FDT \
>  			"setenv bootargs \"${bootargs} " AB_BOOTARGS "\"  ; " \
>  			"echo Running Android...;" \
>  			BOOT_CMD \
> @@ -212,7 +266,8 @@
>  	"stdin=" STDIN_CFG "\0"                                       \
>  	"stdout=" STDOUT_CFG "\0"                                     \
>  	"stderr=" STDOUT_CFG "\0"                                     \
> -	"loadaddr=0x01000000\0"                                       \
> +	"dtboaddr=0x08200000\0"                                       \
> +	"loadaddr=0x01080000\0"                                       \
>  	"fdt_addr_r=0x01000000\0"                                     \
>  	"scriptaddr=0x08000000\0"                                     \
>  	"kernel_addr_r=0x01080000\0"                                  \
> 

Acked-by: Neil Armstrong <narmstrong at baylibre.com>


More information about the U-Boot mailing list