[PATCH 3/5] arm: mvebu: msys: Set CONFIG_SYS_TCLK globally

[Stefan Roese]

On 31.07.21 14:22, Pali Rohár wrote:
> This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this
> CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
> manual configuration in every board file.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/arm/mach-mvebu/include/mach/soc.h | 2 ++
>   include/configs/crs3xx-98dx3236.h      | 1 -
>   include/configs/db-xc3-24g4xg.h        | 1 -
>   3 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
> index eb6906ad8027..e29c0f32c3de 100644
> --- a/arch/arm/mach-mvebu/include/mach/soc.h
> +++ b/arch/arm/mach-mvebu/include/mach/soc.h
> @@ -187,6 +187,8 @@
>   #define BOOT_FROM_NAND		0x1
>   #define BOOT_FROM_UART		0x2
>   #define BOOT_FROM_SPI		0x3
> +
> +#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
>   #else
>   /* SAR values for Armada XP */
>   #define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18230))
> diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h
> index e2ba7b81263f..3feaa60edad8 100644
> --- a/include/configs/crs3xx-98dx3236.h
> +++ b/include/configs/crs3xx-98dx3236.h
> @@ -12,7 +12,6 @@
>   
>   #define CONFIG_SYS_BOOTM_LEN	(64 * 1024 * 1024) /* 64 MB */
>   #define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
> -#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
>   
>   /* USB/EHCI configuration */
>   #define CONFIG_EHCI_IS_TDI
> diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h
> index 0e9ccd9b4419..f04ae487b76a 100644
> --- a/include/configs/db-xc3-24g4xg.h
> +++ b/include/configs/db-xc3-24g4xg.h
> @@ -11,7 +11,6 @@
>    */
>   
>   #define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
> -#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
>   
>   /* USB/EHCI configuration */
>   #define CONFIG_EHCI_IS_TDI
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de