[PATCH 05/12] mmc: nds32: ftsdc010: Convert to livetree

[Simon Glass]

Use the livetree API for this driver.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/mmc/ftsdc010_mci.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
index 221fba313d3..b30da5b72a4 100644
--- a/drivers/mmc/ftsdc010_mci.c
+++ b/drivers/mmc/ftsdc010_mci.c
@@ -30,8 +30,6 @@
 #include <syscon.h>
 #include <linux/err.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
 #define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */
 #define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */
 
@@ -395,24 +393,18 @@ static int ftsdc010_mmc_of_to_plat(struct udevice *dev)
 #if CONFIG_IS_ENABLED(OF_REAL)
 	struct ftsdc_priv *priv = dev_get_priv(dev);
 	struct ftsdc010_chip *chip = &priv->chip;
+
 	chip->name = dev->name;
 	chip->ioaddr = dev_read_addr_ptr(dev);
-	chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
-					"bus-width", 4);
+	chip->buswidth = dev_read_u32_default(dev, "bus-width", 4);
 	chip->priv = dev;
-	priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
-				    "fifo-depth", 0);
-	priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
-					  "fifo-mode");
-	if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
-			 "clock-freq-min-max", priv->minmax, 2)) {
-		int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
-				  "max-frequency", -EINVAL);
-		if (val < 0)
-			return val;
+	priv->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0);
+	priv->fifo_mode = dev_read_bool(dev, "fifo-mode");
+	if (dev_read_u32_array(dev, "clock-freq-min-max", priv->minmax, 2)) {
+		if (dev_read_u32(dev, "max-frequency", &priv->minmax[1]))
+			return -EINVAL;
 
 		priv->minmax[0] = 400000;  /* 400 kHz */
-		priv->minmax[1] = val;
 	} else {
 		debug("%s: 'clock-freq-min-max' property was deprecated.\n",
 		__func__);
-- 
2.32.0.605.g8dce9f2422-goog