[PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices

[Jan Kiszka]

On 03.08.21 16:14, Jan Kiszka wrote:
> On 03.08.21 15:45, Tom Rini wrote:
>> On Tue, Aug 03, 2021 at 03:42:30PM +0200, Jan Kiszka wrote:
>>> On 03.08.21 15:27, Tom Rini wrote:
>>>> On Tue, Aug 03, 2021 at 11:26:55AM +0200, Jan Kiszka wrote:
>>>>
>>>>> From: Jan Kiszka <jan.kiszka at siemens.com>
>>>>>
>>>>> This adds support for the IOT2050 Basic and Advanced devices. The Basic
>>>>> used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS
>>>>> quad-core version.
>>>>>
>>>>> Both variants are booted via a Siemens-provided FSBL that runs on the R5
>>>>> cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot
>>>>> SPL, ATF and TEE have to reside in SPI flash.
>>>>>
>>>>> Full integration into a bootable image can be found on
>>>>> https://github.com/siemens/meta-iot2050
>>>>>
>>>>> Based on original board support by Le Jin, Gao Nian and Chao Zeng.
>>>>>
>>>>> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
>>>>> ---
>>>>>  arch/arm/mach-k3/Kconfig          |   1 +
>>>>>  board/siemens/iot2050/Kconfig     |  32 ++++
>>>>>  board/siemens/iot2050/MAINTAINERS |   9 +
>>>>>  board/siemens/iot2050/Makefile    |  10 ++
>>>>>  board/siemens/iot2050/board.c     | 284 ++++++++++++++++++++++++++++++
>>>>>  board/siemens/iot2050/config.mk   |   8 +
>>>>>  configs/iot2050_defconfig         | 132 ++++++++++++++
>>>>>  doc/board/siemens/iot2050.rst     |  76 ++++++++
>>>>
>>>> I'm still getting the hang of the rST stuff myself and I was too literal
>>>> in my request, sorry.  You need to add an index file (see 5e1df33b6821
>>>> for a recent example) and also update doc/board/index.rst to include
>>>> your index.
>>>>
>>>
>>> OK, will have a look. How to ensure it's compiled / included properly?
>>> "make htmldocs" eg. should be enough?
>>
>> Yes, make htmldocs should be enough.
>>
> 
> Except when it doesn't build the rest: Getting tons of duplicate label
> with Sphinx v1.8.5 here, e.g.
> 
> doc/board/freescale/b4860qds.rst:170:duplicate label
> board/freescale/b4860qds:switch settings...
> 

$ make htmldocs SPHINXOPTS=

is a workaround. Still strange.

Jan

-- 
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux