[PATCH 9/9] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig

[Tom Rini]

This converts the following to Kconfig:
   CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 configs/ls1021aiot_sdcard_defconfig | 1 +
 configs/ls1046aqds_nand_defconfig   | 1 +
 include/configs/ls1021aiot.h        | 1 -
 include/configs/ls1046a_common.h    | 1 -
 4 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig
index 7c198988b889..e8fdd2a37992 100644
--- a/configs/ls1021aiot_sdcard_defconfig
+++ b/configs/ls1021aiot_sdcard_defconfig
@@ -16,6 +16,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMINFO=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index b099b8452a4d..7483308ba756 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -28,6 +28,7 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 6c1d1beb7278..7c29bedb8360 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -63,7 +63,6 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_I2C
 #define CONFIG_SPL_WATCHDOG
 #define CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 289acc02d380..aa222e026931 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -108,7 +108,6 @@
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_WATCHDOG
 #define CONFIG_SPL_I2C
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC
-- 
2.17.1