[PATCH 09/10] xilinx: zynqmp: Generate different u-boot.itb for MULTI_DTB_FIT
Michal Simek
michal.simek at xilinx.com
Mon Aug 23 09:37:56 CEST 2021
When MULTI_DTB_FIT is enabled fit-dtb.blob fit image is created which
contain all DTBs listed by CONFIG_OF_LIST. And with DTB_RELESELECT there is
a need to handle it as one file with DTBs in it not as separate DTBs in
u-boot.its/itb.
That's why extend mkimage_fit_atf.sh to generate u-boot.itb correctly.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Changes in v2:
- Update if condition for MULTI_DTB
arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 47 +++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
index 592be7f67066..feb3a6260a34 100755
--- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
+++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
@@ -111,6 +111,51 @@ cat << __TEE
__TEE
fi
+MULTI_DTB=`awk '/CONFIG_MULTI_DTB_FIT / { print $3 }' include/generated/autoconf.h`
+
+if [ 1"$MULTI_DTB" -eq 11 ]; then
+ cat << __FDT_IMAGE_EOF
+ fdt_1 {
+ description = "Multi DTB fit image";
+ data = /incbin/("fit-dtb.blob");
+ type = "flat_dt";
+ arch = "arm64";
+ compression = "none";
+ $DTB_LOAD
+ hash {
+ algo = "md5";
+ };
+ };
+ };
+ configurations {
+ default = "config_1";
+__FDT_IMAGE_EOF
+
+if [ ! -f $BL31 ]; then
+cat << __CONF_SECTION1_EOF
+ config_1 {
+ description = "Multi DTB without TF-A";
+ firmware = "uboot";
+ loadables = "fdt_1";
+ };
+__CONF_SECTION1_EOF
+else
+cat << __CONF_SECTION1_EOF
+ config_1 {
+ description = "Multi DTB with TF-A";
+ firmware = "atf";
+ loadables = "uboot", "fdt_1";
+ };
+__CONF_SECTION1_EOF
+fi
+
+cat << __ITS_EOF
+ };
+};
+__ITS_EOF
+
+else
+
DEFAULT=1
cnt=1
for dtname in $DT
@@ -181,3 +226,5 @@ cat << __ITS_EOF
};
};
__ITS_EOF
+
+fi
--
2.33.0
More information about the U-Boot
mailing list