[PATCH v2 0/9] board: toradex: verdin-imx8mm: target refresh

[Fabio Estevam]

Hi Marcel,

On Mon, Aug 23, 2021 at 12:04 PM Marcel Ziswiler <marcel at ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
>
> An assortment of fixes and improvements like an Ethernet PHY
> configuration fix, DEK blob encapsulation preparation, migration to
> using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0
> hardware support [1], renaming kernel image variable and using preboot
> for fdtfile evaluation.
>
> Note that this series is applied on top of Peng's Makefile fix [2] as
> otherwise, it may not quite generate all binman artefacts in the right
> order as discussed here [3].
>
> [1] https://developer.toradex.com/verdin-sample-phase-over
> [2] https://marc.info/?l=u-boot&m=162908373904742
> [3] https://marc.info/?l=u-boot&m=162945614207220
>
> Changes in v2:
> - Explicitly pass filename to binman when generating binaries as
>   suggested by Heiko.
> - Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
>   pointed out by Heiko.
> - Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation")
>   as a similar fix was already refused earlier.
> - New patch allows booting recent embedded Linux BSPs.
> - New patch addressing dynamic fdtfile definition.
> - New patch fixing watchdog pinctrl issue.

For the series:

Reviewed-by: Fabio Estevam <festevam at gmail.com>