[PATCH 2/5] board: sama5d27_som1_ek: Modify load addresses

[Clément Léger]

When using OP-TEE, address range [0x20000000 - 0x22000000] is reserved.
This modification allows to have a system which always work even when
OP-TEE is present.

Signed-off-by: Clément Léger <clement.leger at bootlin.com>
---
 include/configs/sama5d27_som1_ek.h | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h
index 8942d15934..2e937c8309 100644
--- a/include/configs/sama5d27_som1_ek.h
+++ b/include/configs/sama5d27_som1_ek.h
@@ -14,15 +14,11 @@
 #undef CONFIG_SYS_AT91_MAIN_CLOCK
 #define CONFIG_SYS_AT91_MAIN_CLOCK      24000000 /* from 24 MHz crystal */
 
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x8000000
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
@@ -30,10 +26,10 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_SD_BOOT
 /* bootstrap + u-boot + env in sd card */
-#define CONFIG_BOOTCOMMAND	"fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x21000000 " \
+#define CONFIG_BOOTCOMMAND	"fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 " \
 				CONFIG_DEFAULT_DEVICE_TREE ".dtb; " \
-				"fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 zImage; " \
-				"bootz 0x22000000 - 0x21000000"
+				"fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \
+				"bootz 0x23000000 - 0x22000000"
 #endif
 
 /* SPL */
-- 
2.32.0