[PATCH v4 2/4] riscv: lib: implement enable_caches for sifive cache

Zong Li zong.li at sifive.com
Tue Aug 31 11:20:36 CEST 2021


The enable_caches is a generic hook for architecture-implemented, we
define this function to enable composable cache of sifive platforms.

In sifive_cache, it invokes the generic cache_enable interface of cache
uclass to execute the relative implementation in SiFive ccache driver.

Signed-off-by: Zong Li <zong.li at sifive.com>
---
 arch/riscv/Kconfig            |  5 +++++
 arch/riscv/lib/Makefile       |  1 +
 arch/riscv/lib/sifive_cache.c | 27 +++++++++++++++++++++++++++
 common/board_r.c              |  4 ++--
 4 files changed, 35 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/lib/sifive_cache.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 4b0c3dffa6..ec651fe0a4 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -179,6 +179,11 @@ config SPL_SIFIVE_CLINT
 	  The SiFive CLINT block holds memory-mapped control and status registers
 	  associated with software and timer interrupts.
 
+config SIFIVE_CACHE
+	bool
+	help
+	  This enables the operations to configure SiFive cache
+
 config ANDES_PLIC
 	bool
 	depends on RISCV_MMODE || SPL_RISCV_MMODE
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index c4cc41434b..06020fcc2a 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o
 obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
 obj-$(CONFIG_CMD_GO) += boot.o
 obj-y	+= cache.o
+obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o
 ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y)
 obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint.o
 obj-$(CONFIG_ANDES_PLIC) += andes_plic.o
diff --git a/arch/riscv/lib/sifive_cache.c b/arch/riscv/lib/sifive_cache.c
new file mode 100644
index 0000000000..28154878fc
--- /dev/null
+++ b/arch/riscv/lib/sifive_cache.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 SiFive, Inc
+ */
+
+#include <common.h>
+#include <cache.h>
+#include <cpu_func.h>
+#include <dm.h>
+
+void enable_caches(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	/* Enable ways of ccache */
+	ret = uclass_get_device_by_driver(UCLASS_CACHE,
+					  DM_DRIVER_GET(sifive_ccache),
+					  &dev);
+	if (ret) {
+		log_debug("Cannot enable cache ways");
+	} else {
+		ret = cache_enable(dev);
+		if (ret)
+			log_debug("ccache enable failed");
+	}
+}
diff --git a/common/board_r.c b/common/board_r.c
index e3e6248a1f..630c2451a2 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -114,7 +114,7 @@ static int initr_reloc(void)
 	return 0;
 }
 
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_RISCV)
 /*
  * Some of these functions are needed purely because the functions they
  * call return void. If we change them to return 0, these stubs can go away.
@@ -607,7 +607,7 @@ static init_fnc_t init_sequence_r[] = {
 	initr_trace,
 	initr_reloc,
 	/* TODO: could x86/PPC have this also perhaps? */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_RISCV)
 	initr_caches,
 	/* Note: For Freescale LS2 SoCs, new MMU table is created in DDR.
 	 *	 A temporary mapping of IFC high region is since removed,
-- 
2.32.0



More information about the U-Boot mailing list