[PATCH 2/3] arm: mvebu: turris_mox: Enable SATA support

Stefan Roese sr at denx.de
Mon Aug 16 08:58:47 CEST 2021


On 13.08.21 13:56, Pali Rohár wrote:
> SATA disks could be connected via mPCIe add-in card with PCIe-SATA
> controller into Mox-B or Mox-G module.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   configs/turris_mox_defconfig | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
> index c19b8379c32a..fc5e1fc3766f 100644
> --- a/configs/turris_mox_defconfig
> +++ b/configs/turris_mox_defconfig
> @@ -12,6 +12,7 @@ CONFIG_DM_GPIO=y
>   CONFIG_DEFAULT_DEVICE_TREE="armada-3720-turris-mox"
>   CONFIG_DEBUG_UART_BASE=0xd0012000
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_OF_BOARD_FIXUP=y
>   CONFIG_DISTRO_DEFAULTS=y
>   # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> @@ -32,6 +33,7 @@ CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_MTD=y
>   CONFIG_CMD_PCI=y
> +CONFIG_CMD_SATA=y
>   CONFIG_CMD_SPI=y
>   CONFIG_CMD_USB=y
>   CONFIG_CMD_WDT=y
> @@ -47,6 +49,8 @@ CONFIG_MAC_PARTITION=y
>   CONFIG_ENV_OVERWRITE=y
>   CONFIG_ENV_IS_IN_SPI_FLASH=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
>   CONFIG_BUTTON=y
>   CONFIG_BUTTON_GPIO=y
>   CONFIG_CLK=y
> @@ -81,6 +85,8 @@ CONFIG_PINCTRL_ARMADA_37XX=y
>   CONFIG_DM_REGULATOR_FIXED=y
>   CONFIG_DM_RTC=y
>   CONFIG_RTC_DS1307=y
> +CONFIG_SCSI=y
> +CONFIG_DM_SCSI=y
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_DEBUG_UART_ANNOUNCE=y
>   CONFIG_MVEBU_A3700_UART=y
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list