[PATCH 00/28] Initial implementation of bootmethod/bootflow

AKASHI Takahiro takahiro.akashi at linaro.org
Wed Aug 25 16:42:51 CEST 2021


Simon,

On Wed, Aug 25, 2021 at 07:11:44AM -0600, Simon Glass wrote:
> Hi,
> 
> On Wed, 25 Aug 2021 at 04:45, Emmanuel Vadot <manu at bidouilliste.com> wrote:
> >
> > On Tue, 24 Aug 2021 12:22:42 +0200 (CEST)
> > Mark Kettenis <mark.kettenis at xs4all.nl> wrote:
> >
> > > > Date: Mon, 23 Aug 2021 16:01:46 -0400
> > > > From: Tom Rini <trini at konsulko.com>
> > > >
> > > > On Mon, Aug 23, 2021 at 11:25:42AM -0600, Simon Glass wrote:
> > > > > Hi Mark,
> > > > >
> > > > > On Mon, 23 Aug 2021 at 05:54, Mark Kettenis <mark.kettenis at xs4all.nl> wrote:
> > > > > >
> > > > > > > From: Simon Glass <sjg at chromium.org>
> > > > > > > Date: Wed, 18 Aug 2021 21:45:33 -0600
> > > > > > >
> > > > > > > Bootmethod and bootflow provide a built-in way for U-Boot to automatically boot
> > > > > > > an Operating System without custom scripting and other customisation:
> > > > > > >
> > > > > > >   - bootmethod - a method to scan a device to find bootflows (owned by U-Boot)
> > > > > > >   - bootflow - a description of how to boot (owned by the distro)
> > > > > > >
> > > > > > > This series provides an initial implementation of these, enable to scan
> > > > > > > for bootflows from MMC and Ethernet. The only bootflow supported is
> > > > > > > distro boot, i.e. an extlinux.conf file included on a filesystem or
> > > > > > > tftp server. It works similiarly to the existing script-based approach,
> > > > > > > but is native to U-Boot.
> > > > > > >
> > > > > > > With this we can boot on a Raspberry Pi 3 with just one command:
> > > > > > >
> > > > > > >    bootflow scan -lb
> > > > > > >
> > > > > > > which means to scan, listing (-l) each bootflow and trying to boot each
> > > > > > > one (-b). The final patch shows this.
> > > > > > >
> > > > > > > It is intended that this approach be expanded to support mechanisms other
> > > > > > > than distro boot, including EFI-related ones. With a standard way to
> > > > > > > identify boot devices, these features become easier. It also should
> > > > > > > support U-Boot scripts, for backwards compatibility only.
> > > > > > >
> > > > > > > The first patch of this series moves boot-related code out of common/ and
> > > > > > > into a new boot/ directory. This helps to collect these related files
> > > > > > > in one place, as common/ is quite large.
> > > > > > >
> > > > > > > Like sysboot, this feature makes use of the existing PXE implementation.
> > > > > > > Much of this series consists of cleaning up that code and refactoring it
> > > > > > > into something closer to a module that can be called, teasing apart its
> > > > > > > reliance on the command-line interpreter to access filesystems and the
> > > > > > > like. Also it now uses function arguments and its own context struct
> > > > > > > internally rather than environment variables, which is very hard to
> > > > > > > follow. No core functional change is included in the included PXE patches.
> > > > > > >
> > > > > > > For documentation, see the 'doc' patch.
> > > > > > >
> > > > > > > There is quite a long list of future work included in the documentation.
> > > > > > > One question is the choice of naming. Since this is a bootloader, should
> > > > > > > we just call this a 'method' and a 'flow' ? The 'boot' prefix is already
> > > > > > > shared by other commands like bootm, booti, etc.
> > > > > > >
> > > > > > > The design is described here:
> > > > > > >
> > > > > > > https://drive.google.com/file/d/1ggW0KJpUOR__vBkj3l61L2dav4ZkNC12/view?usp=sharing
> > > > > > >
> > > > > > > The series is available at u-boot-dm/bmea-working
> > > > > >
> > > > > > How does the user control the order in which devices are scanned/booted?
> > > > >
> > > > > That is not supported in distroboot at present, at least so far as I
> > > > > can see. For Fedora it seems to happen in grub. Do I have that right?
> > > >
> > > > Well, there's "find the next stage", which is boot_targets environment
> > > > variable, and then "where that next stage looks for stuff" which is
> > > > OS-dependent.  Sometimes the ESP grub.cfg file is just enough to tell
> > > > grub to find the full grub.cfg file elsewhere, and sometimes it's a full
> > > > grub.cfg file.  I think Mark is talking about the former, and you've
> > > > said it's not part of this series, yet, but on the TODO list.
> > >
> > > Right.  With the current distroboot code the order of the devices that
> > > appears in boot_targets is determined by per-board/SOC/machine config
> > > files and the order isn't the same for all of them.  Users can change
> > > the order if necessary by modifying the environment variable and
> > > saving the environment.  And for a one-off boot from a different
> > > device they can simply run an appropriate boot command.  The
> > > boot_targets variable in particular is documented in various install
> > > documents so it would probably be good of the new "bootmethod" code
> > > would respect this variable.
> > >
> > > For OpenBSD I'm not really interested in the bootflow part.  As I
> > > explained in the past, that part of the problem is solved in a
> > > (mostly) uniform way across platforms by the OpenBSD bootloader which
> > > can read an /etc/boot.conf that allows bootflow customization.  So as
> > > long as the default of the new code still results in
> > > \EFI\BOOT\BOOT{machine type short-name}.EFI being loaded and run if
> > > there is no U-Boot specific bootflow configured, I'm happy.
> >
> >  Mostly the same for FreeBSD, as long as the efi boot<arch>.efi is
> > loaded and run by default (respecting the boot_targets order) we will
> > be fine.
> 
> OK thanks for the info. My expectation is that bootmethod/bootflow can
> support this easily enough (it is actually simpler than distro boot).
> 
> >
> > > I can't speak for the other BSDs, but my impression is that they are
> > > pretty much in the same position.  The FreeBSD bootloader for example
> > > supports a high-degree of "bootflow" customization and I doubt that
> > > taking it out of the loop is a viable option for most users.
> 
> I think the same may happen with grub. E.g. with Ubuntu I see quite a
> bit of code in the grub.cfg file and it's not clear to me that it can
> be replaced with a 'data instead of code' approach. Still, a valid
> bootflow is simply to jump to an EFI app, which seems to be what is
> happening here. The bootflow side is really just about describing what
> to do, and this case is no different. For now I see three types of
> bootflow, PXE/syslinux, EFI boot manager and EFI app.

By "EFI app", do you mean a way of booting "/efi/boot/bootXX.efi"
(default file name in case that no image path is specified)?

In fact, this behavior, or removable media support, is defined
as part of UEFI boot manager in UEFI specification. (See section 3.5)
What this means is that the boot order, including a removable media
case and user-provided BootXXXX cases, should be controlled solely
by "BootOrder" variable.
So the current combination of distro_bootcmd + UEFI boot manger doesn't
fully comply with the specification.

Even if those two cases are integrated, I don't know how "BootOrder"
semantics can be preserved in your approach.

-Takahiro Akashi


> I'm travelling for three weeks soon, so if it doesn't happen this week
> I'll continue this after that.
> 
> Regards,
> Simon


More information about the U-Boot mailing list