[PATCH v2 1/5] board: sama5d27_som1_ek: Get dram size and base from device tree
Clément Léger
clement.leger at bootlin.com
Mon Aug 16 14:25:39 CEST 2021
In order to make it more flexible and allow modifying the base address
of DRAM without recompiling U-Boot, use memory node from device tree
with fdtdec functions.
Signed-off-by: Clément Léger <clement.leger at bootlin.com>
---
board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
index 1b7d946b50..8c0cf3da54 100644
--- a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
+++ b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <debug_uart.h>
+#include <fdtdec.h>
#include <init.h>
#include <asm/global_data.h>
#include <asm/io.h>
@@ -68,7 +69,7 @@ int board_early_init_f(void)
int board_init(void)
{
/* address of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
#ifdef CONFIG_CMD_USB
board_usb_hw_init();
@@ -77,11 +78,14 @@ int board_init(void)
return 0;
}
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
+}
+
int dram_init(void)
{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
+ return fdtdec_setup_mem_size_base();
}
#define MAC24AA_MAC_OFFSET 0xfa
--
2.32.0
More information about the U-Boot
mailing list