[PATCH] test/py: tpm2: Skip tpm pytest based on env variable
T Karthik Reddy
tkarthik at xilinx.com
Tue Aug 3 08:56:53 CEST 2021
Hi,
Any update on this patch?
Thanks
T Karthik
> -----Original Message-----
> From: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
> Sent: Friday, July 23, 2021 5:48 PM
> To: u-boot at lists.denx.de
> Cc: miquel.raynal at bootlin.com; git <git at xilinx.com>; T Karthik Reddy
> <tkarthik at xilinx.com>; Ashok Reddy Soma <ashokred at xilinx.com>
> Subject: [PATCH] test/py: tpm2: Skip tpm pytest based on env variable
>
> From: T Karthik Reddy <t.karthik.reddy at xilinx.com>
>
> Tpm test cases relies on tpm device setup. Provide an environment variable
> "env__tpm_device_test_skip = True" to skip the test case if tpm device is
> not present.
> Only needed will have to add variable to the py-test framework.
> Test runs successfully even this variable is absent.
>
> Signed-off-by: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
> ---
>
> test/py/tests/test_tpm2.py | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/test/py/tests/test_tpm2.py b/test/py/tests/test_tpm2.py index
> 70f906da51..bb147d4e88 100644
> --- a/test/py/tests/test_tpm2.py
> +++ b/test/py/tests/test_tpm2.py
> @@ -18,6 +18,15 @@ any password.
> * Commands like pcr_setauthpolicy and pcr_resetauthpolicy are not
> implemented here because they would fail the tests in most cases (TPMs do
> not implement them and return an error).
> +
> +
> +Note:
> +This test doesn't rely on boardenv_* configuration value but can change
> +test behavior.
> +
> +* Setup env__tpm_device_test_skip to True if tests with TPM devices
> +should be skipped.
> +
> """
>
> updates = 0
> @@ -29,6 +38,9 @@ def force_init(u_boot_console, force=False):
> twice will spawn an error used to detect that the TPM was not reset and
> no
> initialization code should be run.
> """
> + skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> + if skip_test:
> + pytest.skip('skip TPM device test')
> output = u_boot_console.run_command('tpm2 init')
> if force or not 'Error' in output:
> u_boot_console.run_command('echo --- start of init ---') @@ -44,6
> +56,10 @@ def force_init(u_boot_console, force=False):
> def test_tpm2_init(u_boot_console):
> """Init the software stack to use TPMv2 commands."""
>
> + skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> + if skip_test:
> + pytest.skip('skip TPM device test')
> +
> u_boot_console.run_command('tpm2 init')
> output = u_boot_console.run_command('echo $?')
> assert output.endswith('0')
> @@ -55,6 +71,9 @@ def test_tpm2_startup(u_boot_console):
> Initiate the TPM internal state machine.
> """
>
> + skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> + if skip_test:
> + pytest.skip('skip TPM device test')
> u_boot_console.run_command('tpm2 startup TPM2_SU_CLEAR')
> output = u_boot_console.run_command('echo $?')
> assert output.endswith('0')
> @@ -66,6 +85,9 @@ def test_tpm2_self_test_full(u_boot_console):
> Ask the TPM to perform all self tests to also enable full capabilities.
> """
>
> + skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> + if skip_test:
> + pytest.skip('skip TPM device test')
> u_boot_console.run_command('tpm2 self_test full')
> output = u_boot_console.run_command('echo $?')
> assert output.endswith('0')
> @@ -78,6 +100,9 @@ def test_tpm2_continue_self_test(u_boot_console):
> to enter a fully operational state.
> """
>
> + skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> + if skip_test:
> + pytest.skip('skip TPM device test')
> u_boot_console.run_command('tpm2 self_test continue')
> output = u_boot_console.run_command('echo $?')
> assert output.endswith('0')
> @@ -95,6 +120,9 @@ def test_tpm2_clear(u_boot_console):
> PLATFORM hierarchies are also available.
> """
>
> + skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> + if skip_test:
> + pytest.skip('skip TPM device test')
> u_boot_console.run_command('tpm2 clear TPM2_RH_LOCKOUT')
> output = u_boot_console.run_command('echo $?')
> assert output.endswith('0')
> --
> 2.17.1
More information about the U-Boot
mailing list