[PATCH v3 09/10] verdin-imx8mm: use preboot for fdtfile evaluation

[Marcel Ziswiler]

From: Igor Opaniuk <igor.opaniuk at toradex.com>

Enable and set preboot var with fdtfile evaluation.
It will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Reviewed-by: Fabio Estevam <festevam at gmail.com>

---

(no changes since v2)

Changes in v2:
- New patch addressing dynamic fdtfile definition.

 configs/verdin-imx8mm_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index ad9c00a3cc4..ab549ebbada 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -28,7 +28,8 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/verdin-imx8mm/imximage.cfg"
 # CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_DEFAULT_FDT_FILE="fsl-imx8mm-verdin-dev.dtb"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb"
 CONFIG_LOG=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-- 
2.26.2