[PATCH 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux
Michael Walle
michael at walle.cc
Tue Aug 31 17:40:27 CEST 2021
Now that everything is prepared, copy the fsl-ls1028a.dtsi from the
linux kernel v5.14.
Signed-off-by: Michael Walle <michael at walle.cc>
---
arch/arm/dts/fsl-ls1028a.dtsi | 1212 +++++++++++++----
.../dt-bindings/clock/fsl,qoriq-clockgen.h | 15 +
2 files changed, 958 insertions(+), 269 deletions(-)
create mode 100644 include/dt-bindings/clock/fsl,qoriq-clockgen.h
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 69850fe7f2..343ecf0e89 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -1,12 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * NXP ls1028a SOC common device tree source
+ * Device Tree Include file for NXP Layerscape-1028A family SoC.
*
- * Copyright 2019-2020 NXP
+ * Copyright 2018-2020 NXP
+ *
+ * Harninder Rai <harninder.rai at nxp.com>
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls1028a";
@@ -14,6 +18,54 @@
#address-cells = <2>;
#size-cells = <2>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0>;
+ enable-method = "psci";
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PW20>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x1>;
+ enable-method = "psci";
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PW20>;
+ #cooling-cells = <2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "psci";
+
+ CPU_PW20: cpu-pw20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PW20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
+ };
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -21,14 +73,33 @@
clock-output-names = "sysclk";
};
- gic: interrupt-controller at 6000000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
- <0x0 0x06040000 0 0x40000>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
- IRQ_TYPE_LEVEL_LOW)>;
+ osc_27m: clock-osc-27m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "phy_27m";
+ };
+
+ dpclk: clock-controller at f1f0000 {
+ compatible = "fsl,ls1028a-plldig";
+ reg = <0x0 0xf1f0000 0x0 0xffff>;
+ #clock-cells = <0>;
+ clocks = <&osc_27m>;
+ };
+
+ firmware {
+ optee: optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ status = "disabled";
+ };
+ };
+
+ reboot {
+ compatible ="syscon-reboot";
+ regmap = <&rst>;
+ offset = <0>;
+ mask = <0x02>;
};
timer {
@@ -43,177 +114,127 @@
IRQ_TYPE_LEVEL_LOW)>;
};
- soc: soc {
- compatible = "simple-bus";
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gic: interrupt-controller at 6000000 {
+ compatible= "arm,gic-v3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
-
- clockgen: clocking at 1300000 {
- compatible = "fsl,ls1028a-clockgen";
- reg = <0x0 0x1300000 0x0 0xa0000>;
- #clock-cells = <2>;
- clocks = <&sysclk>;
+ reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
+ #interrupt-cells= <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ its: gic-its at 6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
};
+ };
- fspi: flexspi at 20c0000 {
- compatible = "nxp,lx2160a-fspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x20c0000 0x0 0x10000>,
- <0x0 0x20000000 0x0 0x10000000>;
- reg-names = "fspi_base", "fspi_mmap";
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "fspi_en", "fspi";
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ thermal-zones {
+ ddr-controller {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
- duart0: serial at 21c0500 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ trips {
+ ddr-ctrler-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- duart1: serial at 21c0600 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ ddr-ctrler-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
- pcie1: pcie at 3400000 {
- compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
- reg = <0x00 0x03400000 0x0 0x80000
- 0x00 0x03480000 0x0 0x40000 /* lut registers */
- 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */
- 0x80 0x00000000 0x0 0x20000>; /* configuration space */
- reg-names = "dbi", "lut", "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- };
+ core-cluster {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
- pcie2: pcie at 3500000 {
- compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
- reg = <0x00 0x03500000 0x0 0x80000
- 0x00 0x03580000 0x0 0x40000 /* lut registers */
- 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */
- 0x88 0x00000000 0x0 0x20000>; /* configuration space */
- reg-names = "dbi", "lut", "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- };
-
- pcie at 1f0000000 {
- compatible = "pci-host-ecam-generic";
- /* ECAM bus 0, HW has more space reserved but not populated */
- bus-range = <0x0 0x0>;
- reg = <0x01 0xf0000000 0x0 0x100000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
- enetc_port0: pci at 0,0 {
- reg = <0x000000 0 0 0 0>;
- status = "disabled";
- };
- enetc_port1: pci at 0,1 {
- reg = <0x000100 0 0 0 0>;
- status = "disabled";
- };
- enetc_port2: pci at 0,2 {
- reg = <0x000200 0 0 0 0>;
- status = "disabled";
- phy-mode = "internal";
+ trips {
+ core_cluster_alert: core-cluster-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- fixed-link {
- speed = <2500>;
- full-duplex;
+ core_cluster_crit: core-cluster-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
};
};
- enetc_mdio_pf3: pci at 0,3 {
- #address-cells=<0>;
- #size-cells=<1>;
- reg = <0x000300 0 0 0 0>;
- status = "disabled";
- fixed-link {
- speed = <1000>;
- full-duplex;
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
+ };
+ };
- mscc_felix: pci at 0,5 {
- reg = <0x000500 0 0 0 0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mscc_felix_port0: port at 0 {
- reg = <0>;
- status = "disabled";
- };
-
- mscc_felix_port1: port at 1 {
- reg = <1>;
- status = "disabled";
- };
-
- mscc_felix_port2: port at 2 {
- reg = <2>;
- status = "disabled";
- };
-
- mscc_felix_port3: port at 3 {
- reg = <3>;
- status = "disabled";
- };
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- mscc_felix_port4: port at 4 {
- reg = <4>;
- phy-mode = "internal";
- status = "disabled";
+ ddr: memory-controller at 1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ };
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
+ dcfg: syscon at 1e00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ ranges = <0x0 0x0 0x1e00000 0x10000>;
+ little-endian;
- mscc_felix_port5: port at 5 {
- reg = <5>;
- phy-mode = "internal";
- status = "disabled";
+ fspi_clk: clock-controller at 900 {
+ compatible = "fsl,ls1028a-flexspi-clk";
+ reg = <0x900 0x4>;
+ #clock-cells = <0>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
+ clock-output-names = "fspi_clk";
+ };
+ };
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
+ rst: syscon at 1e60000 {
+ compatible = "syscon";
+ reg = <0x0 0x1e60000 0x0 0x10000>;
+ little-endian;
+ };
- };
- };
- };
+ scfg: syscon at 1fc0000 {
+ compatible = "fsl,ls1028a-scfg", "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x10000>;
+ big-endian;
+ };
- enetc_port3: pci at 0,6 {
- reg = <0x000600 0 0 0 0>;
- status = "disabled";
- phy-mode = "internal";
- };
+ clockgen: clock-controller at 1300000 {
+ compatible = "fsl,ls1028a-clockgen";
+ reg = <0x0 0x1300000 0x0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
};
i2c0: i2c at 2000000 {
@@ -222,8 +243,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -233,8 +254,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -244,8 +265,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -255,8 +276,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -266,8 +287,8 @@
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -277,8 +298,8 @@
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -288,8 +309,8 @@
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -299,145 +320,237 @@
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
-
- lpuart0: serial at 2260000 {
- compatible = "fsl,ls1028a-lpuart";
- reg = <0x0 0x2260000 0x0 0x1000>;
- interrupts = <0 232 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
-
- lpuart1: serial at 2270000 {
- compatible = "fsl,ls1028a-lpuart";
- reg = <0x0 0x2270000 0x0 0x1000>;
- interrupts = <0 233 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
-
- lpuart2: serial at 2280000 {
- compatible = "fsl,ls1028a-lpuart";
- reg = <0x0 0x2280000 0x0 0x1000>;
- interrupts = <0 234 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
-
- lpuart3: serial at 2290000 {
- compatible = "fsl,ls1028a-lpuart";
- reg = <0x0 0x2290000 0x0 0x1000>;
- interrupts = <0 235 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
- lpuart4: serial at 22a0000 {
- compatible = "fsl,ls1028a-lpuart";
- reg = <0x0 0x22a0000 0x0 0x1000>;
- interrupts = <0 236 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
-
- lpuart5: serial at 22b0000 {
- compatible = "fsl,ls1028a-lpuart";
- reg = <0x0 0x22b0000 0x0 0x1000>;
- interrupts = <0 237 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
-
- usb0: usb3 at 3100000 {
- compatible = "fsl,layerscape-dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- status = "disabled";
- };
-
- usb1: usb3 at 3110000 {
- compatible = "fsl,layerscape-dwc3";
- reg = <0x0 0x3110000 0x0 0x10000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
+ fspi: spi at 20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&fspi_clk>, <&fspi_clk>;
+ clock-names = "fspi_en", "fspi";
status = "disabled";
};
- dspi0: dspi at 2100000 {
+ dspi0: spi at 2100000 {
compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
- num-cs = <5>;
- litte-endian;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ dmas = <&edma0 0 62>, <&edma0 0 60>;
+ dma-names = "tx", "rx";
+ spi-num-chipselects = <4>;
+ little-endian;
status = "disabled";
};
- dspi1: dspi at 2110000 {
+ dspi1: spi at 2110000 {
compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
- num-cs = <5>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ dmas = <&edma0 0 58>, <&edma0 0 56>;
+ dma-names = "tx", "rx";
+ spi-num-chipselects = <4>;
little-endian;
status = "disabled";
};
- dspi2: dspi at 2120000 {
+ dspi2: spi at 2120000 {
compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
- num-cs = <5>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ dmas = <&edma0 0 54>, <&edma0 0 2>;
+ dma-names = "tx", "rx";
+ spi-num-chipselects = <3>;
little-endian;
status = "disabled";
};
- esdhc: esdhc at 2140000 {
- compatible = "fsl,esdhc";
+ esdhc: mmc at 2140000 {
+ compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
+ clock-frequency = <0>; /* fixed up by bootloader */
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
bus-width = <4>;
status = "disabled";
};
- esdhc1: esdhc at 2150000 {
- compatible = "fsl,esdhc";
+ esdhc1: mmc at 2150000 {
+ compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
- non-removable;
+ clock-frequency = <0>; /* fixed up by bootloader */
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ broken-cd;
+ little-endian;
bus-width = <4>;
status = "disabled";
};
+ can0: can at 2180000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can at 2190000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ duart0: serial at 21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0500 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ status = "disabled";
+ };
+
+ duart1: serial at 21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0600 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ status = "disabled";
+ };
+
+
+ lpuart0: serial at 2260000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 32>,
+ <&edma0 1 33>;
+ status = "disabled";
+ };
+
+ lpuart1: serial at 2270000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2270000 0x0 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 30>,
+ <&edma0 1 31>;
+ status = "disabled";
+ };
+
+ lpuart2: serial at 2280000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2280000 0x0 0x1000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 28>,
+ <&edma0 1 29>;
+ status = "disabled";
+ };
+
+ lpuart3: serial at 2290000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2290000 0x0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 26>,
+ <&edma0 1 27>;
+ status = "disabled";
+ };
+
+ lpuart4: serial at 22a0000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x22a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 24>,
+ <&edma0 1 25>;
+ status = "disabled";
+ };
+
+ lpuart5: serial at 22b0000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x22b0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 22>,
+ <&edma0 1 23>;
+ status = "disabled";
+ };
+
+ edma0: dma-controller at 22c0000 {
+ #dma-cells = <2>;
+ compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
+ reg = <0x0 0x22c0000 0x0 0x10000>,
+ <0x0 0x22d0000 0x0 0x10000>,
+ <0x0 0x22e0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ };
+
gpio1: gpio at 2300000 {
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
@@ -471,18 +584,579 @@
little-endian;
};
+ usb0: usb at 3100000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
+ usb1: usb at 3110000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
sata: sata at 3200000 {
compatible = "fsl,ls1028a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
- 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/
- reg-names = "sata-base", "ecc-addr";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ status = "disabled";
+ };
+
+ pcie1: pcie at 3400000 {
+ compatible = "fsl,ls1028a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-viewport = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
status = "disabled";
};
- cluster1_core0_watchdog: wdt at c000000 {
+ pcie2: pcie at 3500000 {
+ compatible = "fsl,ls1028a-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-viewport = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+ status = "disabled";
+ };
+
+ smmu: iommu at 5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <8>;
+ #iommu-cells = <1>;
+ stream-match-mask = <0x7c00>;
+ /* global secure fault */
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ /* combined secure interrupt */
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ /* global non-secure fault */
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ /* combined non-secure interrupt */
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ /* performance counter interrupts 0-7 */
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ /* per context interrupt, 64 interrupts */
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ crypto: crypto at 8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr at 10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr at 20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr at 30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr at 40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ qdma: dma-controller at 8380000 {
+ compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue0",
+ "qdma-queue1", "qdma-queue2", "qdma-queue3";
+ dma-channels = <8>;
+ block-number = <1>;
+ block-offset = <0x10000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ };
+
+ cluster1_core0_watchdog: watchdog at c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster1_core1_watchdog: watchdog at c010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ sai1: audio-controller at f100000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 4>,
+ <&edma0 1 3>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai2: audio-controller at f110000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 6>,
+ <&edma0 1 5>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai3: audio-controller at f120000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 8>,
+ <&edma0 1 7>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai4: audio-controller at f130000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf130000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 10>,
+ <&edma0 1 9>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai5: audio-controller at f140000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf140000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 12>,
+ <&edma0 1 11>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai6: audio-controller at f150000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf150000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 14>,
+ <&edma0 1 13>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ tmu: tmu at 1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+ fsl,tmu-calibration = <0x00000000 0x00000024
+ 0x00000001 0x0000002b
+ 0x00000002 0x00000031
+ 0x00000003 0x00000038
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000045
+ 0x00000006 0x0000004c
+ 0x00000007 0x00000053
+ 0x00000008 0x00000059
+ 0x00000009 0x00000060
+ 0x0000000a 0x00000066
+ 0x0000000b 0x0000006d
+
+ 0x00010000 0x0000001c
+ 0x00010001 0x00000024
+ 0x00010002 0x0000002c
+ 0x00010003 0x00000035
+ 0x00010004 0x0000003d
+ 0x00010005 0x00000045
+ 0x00010006 0x0000004d
+ 0x00010007 0x00000055
+ 0x00010008 0x0000005e
+ 0x00010009 0x00000066
+ 0x0001000a 0x0000006e
+
+ 0x00020000 0x00000018
+ 0x00020001 0x00000022
+ 0x00020002 0x0000002d
+ 0x00020003 0x00000038
+ 0x00020004 0x00000043
+ 0x00020005 0x0000004d
+ 0x00020006 0x00000058
+ 0x00020007 0x00000063
+ 0x00020008 0x0000006e
+
+ 0x00030000 0x00000010
+ 0x00030001 0x0000001c
+ 0x00030002 0x00000029
+ 0x00030003 0x00000036
+ 0x00030004 0x00000042
+ 0x00030005 0x0000004f
+ 0x00030006 0x0000005b
+ 0x00030007 0x00000068>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ pcie at 1f0000000 { /* Integrated Endpoint Root Complex */
+ compatible = "pci-host-ecam-generic";
+ reg = <0x01 0xf0000000 0x0 0x100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ msi-parent = <&its>;
+ device_type = "pci";
+ bus-range = <0x0 0x0>;
+ dma-coherent;
+ msi-map = <0 &its 0x17 0xe>;
+ iommu-map = <0 &smmu 0x17 0xe>;
+ /* PF0-6 BAR0 - non-prefetchable memory */
+ ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000
+ /* PF0-6 BAR2 - prefetchable memory */
+ 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000
+ /* PF0: VF0-1 BAR0 - non-prefetchable memory */
+ 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000
+ /* PF0: VF0-1 BAR2 - prefetchable memory */
+ 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000
+ /* PF1: VF0-1 BAR0 - non-prefetchable memory */
+ 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000
+ /* PF1: VF0-1 BAR2 - prefetchable memory */
+ 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
+ /* BAR4 (PF5) - non-prefetchable memory */
+ 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
+
+ enetc_port0: ethernet at 0,0 {
+ compatible = "fsl,enetc";
+ reg = <0x000000 0 0 0 0>;
+ status = "disabled";
+ };
+
+ enetc_port1: ethernet at 0,1 {
+ compatible = "fsl,enetc";
+ reg = <0x000100 0 0 0 0>;
+ status = "disabled";
+ };
+
+ enetc_port2: ethernet at 0,2 {
+ compatible = "fsl,enetc";
+ reg = <0x000200 0 0 0 0>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ enetc_mdio_pf3: mdio at 0,3 {
+ compatible = "fsl,enetc-mdio";
+ reg = <0x000300 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ethernet at 0,4 {
+ compatible = "fsl,enetc-ptp";
+ reg = <0x000400 0 0 0 0>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
+ little-endian;
+ fsl,extts-fifo;
+ };
+
+ mscc_felix: ethernet-switch at 0,5 {
+ reg = <0x000500 0 0 0 0>;
+ /* IEP INT_B */
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External ports */
+ mscc_felix_port0: port at 0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ mscc_felix_port1: port at 1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ mscc_felix_port2: port at 2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ mscc_felix_port3: port at 3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ /* Internal ports */
+ mscc_felix_port4: port at 4 {
+ reg = <4>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ mscc_felix_port5: port at 5 {
+ reg = <5>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ enetc_port3: ethernet at 0,6 {
+ compatible = "fsl,enetc";
+ reg = <0x000600 0 0 0 0>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rcec at 1f,0 {
+ reg = <0x00f800 0 0 0 0>;
+ /* IEP INT_A */
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ /* Integrated Endpoint Register Block */
+ ierb at 1f0800000 {
+ compatible = "fsl,ls1028a-enetc-ierb";
+ reg = <0x01 0xf0800000 0x0 0x10000>;
+ };
+
+ rcpm: power-controller at 1e34040 {
+ compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34040 0x0 0x1c>;
+ #fsl,rcpm-wakeup-cells = <7>;
+ little-endian;
+ };
+
+ ftm_alarm0: timer at 2800000 {
+ compatible = "fsl,ls1028a-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ malidp0: display at f080000 {
+ compatible = "arm,mali-dp500";
+ reg = <0x0 0xf080000 0x0 0x10000>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "DE", "SE";
+ clocks = <&dpclk>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ arm,malidp-arqos-value = <0xd000d000>;
+
+ port {
+ dp0_out: endpoint {
+
+ };
};
};
};
diff --git a/include/dt-bindings/clock/fsl,qoriq-clockgen.h b/include/dt-bindings/clock/fsl,qoriq-clockgen.h
new file mode 100644
index 0000000000..ddec7d0bdc
--- /dev/null
+++ b/include/dt-bindings/clock/fsl,qoriq-clockgen.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef DT_CLOCK_FSL_QORIQ_CLOCKGEN_H
+#define DT_CLOCK_FSL_QORIQ_CLOCKGEN_H
+
+#define QORIQ_CLK_SYSCLK 0
+#define QORIQ_CLK_CMUX 1
+#define QORIQ_CLK_HWACCEL 2
+#define QORIQ_CLK_FMAN 3
+#define QORIQ_CLK_PLATFORM_PLL 4
+#define QORIQ_CLK_CORECLK 5
+
+#define QORIQ_CLK_PLL_DIV(x) ((x) - 1)
+
+#endif /* DT_CLOCK_FSL_QORIQ_CLOCKGEN_H */
--
2.30.2
More information about the U-Boot
mailing list