[PATCH 2/4] include: axp_pmic: Include headers for all variants

[Samuel Holland]

A single DM-based driver should be able to support some feature for
several PMIC variants where the interface is the same. For example,
all PMIC variants use the same register bit to trigger poweroff.

However, currently only definitions for a single PMIC are available at
a time. This requires drivers to use #ifdefs and different indentifiers
for each variant they support.

Let's simplify this by making register definitions for all variants
available from the header. Then no preprocessor conditions are needed;
the driver can use the register definition from any variant that
supports the relevant feature.

An exception is the GPIO-related definitions, which do not use unique
identifiers. So for now, keep them like before. They will be cleaned up
along with the GPIO driver.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

 include/axp152.h   |  2 ++
 include/axp209.h   |  2 ++
 include/axp221.h   |  2 ++
 include/axp809.h   |  2 ++
 include/axp818.h   |  2 ++
 include/axp_pmic.h | 12 ------------
 6 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/include/axp152.h b/include/axp152.h
index c81f172502c..10d845fec42 100644
--- a/include/axp152.h
+++ b/include/axp152.h
@@ -15,6 +15,7 @@ enum axp152_reg {
 #define AXP152_POWEROFF			(1 << 7)
 
 /* For axp_gpio.c */
+#ifdef CONFIG_AXP152_POWER
 #define AXP_GPIO0_CTRL			0x90
 #define AXP_GPIO1_CTRL			0x91
 #define AXP_GPIO2_CTRL			0x92
@@ -24,3 +25,4 @@ enum axp152_reg {
 #define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
 #define AXP_GPIO_STATE			0x97
 #define AXP_GPIO_STATE_OFFSET			0
+#endif
diff --git a/include/axp209.h b/include/axp209.h
index f4f1b2fe56d..30399a8d621 100644
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -74,6 +74,7 @@ enum axp209_reg {
 #define AXP209_POWEROFF			BIT(7)
 
 /* For axp_gpio.c */
+#ifdef CONFIG_AXP209_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_VBUS_PRESENT	BIT(5)
 #define AXP_GPIO0_CTRL			0x90
@@ -84,3 +85,4 @@ enum axp209_reg {
 #define AXP_GPIO_CTRL_INPUT		0x02 /* Input */
 #define AXP_GPIO_STATE			0x94
 #define AXP_GPIO_STATE_OFFSET		4
+#endif
diff --git a/include/axp221.h b/include/axp221.h
index caffb910f4b..a02e9b4f645 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -50,6 +50,7 @@
 #define AXP221_SID		0x20
 
 /* For axp_gpio.c */
+#ifdef CONFIG_AXP221_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
 #define AXP_VBUS_IPSOUT			0x30
@@ -63,3 +64,4 @@
 #define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
 #define AXP_GPIO_STATE			0x94
 #define AXP_GPIO_STATE_OFFSET			0
+#endif
diff --git a/include/axp809.h b/include/axp809.h
index 86b29253306..430dbef622b 100644
--- a/include/axp809.h
+++ b/include/axp809.h
@@ -44,6 +44,7 @@
 #define AXP809_SHUTDOWN_POWEROFF	(1 << 7)
 
 /* For axp_gpio.c */
+#ifdef CONFIG_AXP809_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
 #define AXP_VBUS_IPSOUT			0x30
@@ -57,3 +58,4 @@
 #define AXP_GPIO_CTRL_INPUT		0x02 /* Input */
 #define AXP_GPIO_STATE			0x94
 #define AXP_GPIO_STATE_OFFSET		0
+#endif
diff --git a/include/axp818.h b/include/axp818.h
index b16fe0b1527..8bac6b67ca2 100644
--- a/include/axp818.h
+++ b/include/axp818.h
@@ -58,6 +58,7 @@
 #define AXP818_SHUTDOWN_POWEROFF	(1 << 7)
 
 /* For axp_gpio.c */
+#ifdef CONFIG_AXP818_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
 #define AXP_VBUS_IPSOUT			0x30
@@ -71,3 +72,4 @@
 #define AXP_GPIO_CTRL_INPUT		0x02 /* Input */
 #define AXP_GPIO_STATE			0x94
 #define AXP_GPIO_STATE_OFFSET		0
+#endif
diff --git a/include/axp_pmic.h b/include/axp_pmic.h
index 2eab18937bc..01ebba63479 100644
--- a/include/axp_pmic.h
+++ b/include/axp_pmic.h
@@ -9,24 +9,12 @@
 
 #include <stdbool.h>
 
-#ifdef CONFIG_AXP152_POWER
 #include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
 #include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
 #include <axp221.h>
-#endif
-#ifdef CONFIG_AXP305_POWER
 #include <axp305.h>
-#endif
-#ifdef CONFIG_AXP809_POWER
 #include <axp809.h>
-#endif
-#ifdef CONFIG_AXP818_POWER
 #include <axp818.h>
-#endif
 
 #define AXP_PMIC_MODE_REG		0x3e
 #define AXP_PMIC_MODE_I2C		0x00
-- 
2.31.1