[PATCH v2 0/6] Call phy_config at port probe time for the Felix DSA driver

[Vladimir Oltean]

On Tue, Aug 24, 2021 at 03:00:37PM +0300, Vladimir Oltean wrote:
> Changes in v2:
> Rebased on top of the master branch (solves this conflict:
> https://patchwork.ozlabs.org/project/uboot/patch/20210629170839.2583797-4-olteanv@gmail.com/
> with Tim Harvey's patch to make DSA masters promiscuous)
> 
> This series makes the Felix DSA driver initialize all its connected PHYs
> regardless of whether those will be used for networking or not. This is
> in order to satisfy the expectations of some software in later boot
> stages.
> 
> To make this work, it is necessary to introduce a new method in struct
> dsa_ops: .port_probe().
> 
> There is some further refactoring/cleanup along the way.
> 
> Vladimir Oltean (6):
>   net: dsa: felix: felix_init() can be static
>   net: dsa: use "err" instead of "ret" in dsa_port_probe
>   net: dsa: refactor the code to set the port MAC address into a
>     dedicated function
>   net: dsa: introduce a .port_probe() method in struct dsa_ops
>   net: dsa: felix: call phy_config at .port_probe() time
>   net: dsa: felix: propagate the error code from phy_startup()
> 
>  drivers/net/mscc_eswitch/felix_switch.c | 28 ++++++-----
>  include/net/dsa.h                       |  5 +-
>  net/dsa-uclass.c                        | 62 +++++++++++++++----------
>  3 files changed, 59 insertions(+), 36 deletions(-)
> 
> -- 
> 2.25.1
> 

It would be nice if these patches could go in through the networking
tree, I would like to send one more DM_DSA driver and it also needs the
new "port_probe" method introduced by this change set. Thanks.