[PATCH] iot2050: binman: add missing-msg for blobs

[Ivan Mikhaylov]

From: Ivan Mikhaylov <ivan.mikhaylov at siemens.com>

Add the 'missing-msg' for blobs for more detailed output on missing system
firmware and SEBoot blobs.

Signed-off-by: Ivan Mikhaylov <ivan.mikhaylov at siemens.com>
---
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi |  5 +++++
 tools/binman/missing-blob-help               | 11 +++++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
index b0c758477d..4f0435cea5 100644
--- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -19,6 +19,7 @@
 		blob-ext at 0x000000 {
 			offset = <0x000000>;
 			filename = "tiboot3.bin";
+			missing-msg = "iot2050-seboot";
 		};
 
 		blob at 0x080000 {
@@ -187,21 +188,25 @@
 		blob-ext at 0x6c0000 {
 			offset = <0x6c0000>;
 			filename = "sysfw.itb";
+			missing-msg = "iot2050-sysfw";
 		};
 		/* PG1 sysfw, advanced variant */
 		blob-ext at 0x740000 {
 			offset = <0x740000>;
 			filename = "sysfw.itb_HS";
+			missing-msg = "iot2050-sysfw";
 		};
 		/* PG2 sysfw, basic variant */
 		blob-ext at 0x7c0000 {
 			offset = <0x7c0000>;
 			filename = "sysfw_sr2.itb";
+			missing-msg = "iot2050-sysfw";
 		};
 		/* PG2 sysfw, advanced variant */
 		blob-ext at 0x840000 {
 			offset = <0x840000>;
 			filename = "sysfw_sr2.itb_HS";
+			missing-msg = "iot2050-sysfw";
 		};
 	};
 };
diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help
index dc2d9c9811..d7c0c6bf16 100644
--- a/tools/binman/missing-blob-help
+++ b/tools/binman/missing-blob-help
@@ -18,6 +18,17 @@ scp-sunxi:
 SCP firmware is required for system suspend, but is otherwise optional.
 Please read the section on SCP firmware in board/sunxi/README.sunxi64
 
+iot2050-seboot:
+See the documentation for IOT2050 board. Your image missing SEBoot
+which is mandatory for board startup. Prebuilt SEBoot located at
+meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/tiboot3.bin.
+
+iot2050-sysfw:
+See the documentation for IOT2050 board. Your image missing system
+firmware which is mandatory for board startup. Prebuilt system firmware
+located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/
+with sysfw prefix.
+
 k3-rti-wdt-firmware:
 If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for
 the R5F core(s) to trigger the system reset. One possible source is
-- 
2.34.0