[PATCH] iot2050: binman: add missing-msg for blobs

Simon Glass sjg at chromium.org
Fri Dec 10 01:15:05 CET 2021


Hi Ivan,

On Thu, 9 Dec 2021 at 06:11, Ivan Mikhaylov <fr0st61te at gmail.com> wrote:
>
> From: Ivan Mikhaylov <ivan.mikhaylov at siemens.com>
>
> Add the 'missing-msg' for blobs for more detailed output on missing system
> firmware and SEBoot blobs.
>
> Signed-off-by: Ivan Mikhaylov <ivan.mikhaylov at siemens.com>
> ---
>  arch/arm/dts/k3-am65-iot2050-boot-image.dtsi |  5 +++++
>  tools/binman/missing-blob-help               | 11 +++++++++++
>  2 files changed, 16 insertions(+)

Reviewed-by: Simon Glass <sjg at chromium.org>

nits below (I can fix when applying if you like?)

>
> diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
> index b0c758477d..4f0435cea5 100644
> --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
> +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
> @@ -19,6 +19,7 @@
>                 blob-ext at 0x000000 {
>                         offset = <0x000000>;
>                         filename = "tiboot3.bin";
> +                       missing-msg = "iot2050-seboot";
>                 };
>
>                 blob at 0x080000 {
> @@ -187,21 +188,25 @@
>                 blob-ext at 0x6c0000 {
>                         offset = <0x6c0000>;
>                         filename = "sysfw.itb";
> +                       missing-msg = "iot2050-sysfw";
>                 };
>                 /* PG1 sysfw, advanced variant */
>                 blob-ext at 0x740000 {
>                         offset = <0x740000>;
>                         filename = "sysfw.itb_HS";
> +                       missing-msg = "iot2050-sysfw";
>                 };
>                 /* PG2 sysfw, basic variant */
>                 blob-ext at 0x7c0000 {
>                         offset = <0x7c0000>;
>                         filename = "sysfw_sr2.itb";
> +                       missing-msg = "iot2050-sysfw";
>                 };
>                 /* PG2 sysfw, advanced variant */
>                 blob-ext at 0x840000 {
>                         offset = <0x840000>;
>                         filename = "sysfw_sr2.itb_HS";
> +                       missing-msg = "iot2050-sysfw";
>                 };
>         };
>  };
> diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help
> index dc2d9c9811..d7c0c6bf16 100644
> --- a/tools/binman/missing-blob-help
> +++ b/tools/binman/missing-blob-help
> @@ -18,6 +18,17 @@ scp-sunxi:
>  SCP firmware is required for system suspend, but is otherwise optional.
>  Please read the section on SCP firmware in board/sunxi/README.sunxi64
>
> +iot2050-seboot:
> +See the documentation for IOT2050 board. Your image missing SEBoot

image is missing

> +which is mandatory for board startup. Prebuilt SEBoot located at
> +meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/tiboot3.bin.
> +
> +iot2050-sysfw:
> +See the documentation for IOT2050 board. Your image missing system

image is missing

> +firmware which is mandatory for board startup. Prebuilt system firmware
> +located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/
> +with sysfw prefix.
> +
>  k3-rti-wdt-firmware:
>  If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for
>  the R5F core(s) to trigger the system reset. One possible source is
> --
> 2.34.0
>

Regards,
Simon


More information about the U-Boot mailing list