[PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
Kever Yang
kever.yang at rock-chips.com
Fri Dec 24 07:55:32 CET 2021
On 2021/11/16 上午1:38, Jagan Teki wrote:
> PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
>
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
>
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
>
> PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
> 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/mach-rockchip/px30/Kconfig | 8 ++
> board/engicam/px30_core/MAINTAINERS | 6 +
> configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
> 4 files changed, 123 insertions(+)
> create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 57a33d0bc4..95465d1dac 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -79,6 +79,7 @@ dtb-$(CONFIG_ROCKCHIP_PX30) += \
> px30-evb.dtb \
> px30-firefly.dtb \
> px30-engicam-px30-core-ctouch2.dtb \
> + px30-engicam-px30-core-ctouch2-of10.dtb \
> px30-engicam-px30-core-edimm2.2.dtb \
> rk3326-odroid-go2.dtb
>
> diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
> index aa5cc471ee..145bf3591f 100644
> --- a/arch/arm/mach-rockchip/px30/Kconfig
> +++ b/arch/arm/mach-rockchip/px30/Kconfig
> @@ -27,6 +27,14 @@ config TARGET_PX30_CORE
> * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
> PX30.Core C.TOUCH Carrier board.
>
> + PX30.Core CTOUCH2-OF10:
> + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> + * CTOUCH2.0 is a general purpose Carrier board with capacitive
> + touch interface support.
> + * 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> + * PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
> + 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
> +
> config ROCKCHIP_BOOT_MODE_REG
> default 0xff010200
>
> diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
> index b87ca22207..77f0c2dba5 100644
> --- a/board/engicam/px30_core/MAINTAINERS
> +++ b/board/engicam/px30_core/MAINTAINERS
> @@ -4,6 +4,12 @@ M: Suniel Mahesh <sunil at amarulasolutions.com>
> S: Maintained
> F: configs/px30-core-ctouch2-px30_defconfig
>
> +PX30-Core-CTOUCH2.0-OF10
> +M: Jagan Teki <jagan at amarulasolutions.com>
> +M: Suniel Mahesh <sunil at amarulasolutions.com>
> +S: Maintained
> +F: configs/px30-core-ctouch2-of10-px30_defconfig
> +
> PX30-Core-EDIMM2.2
> M: Jagan Teki <jagan at amarulasolutions.com>
> M: Suniel Mahesh <sunil at amarulasolutions.com>
> diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
> new file mode 100644
> index 0000000000..664c9774eb
> --- /dev/null
> +++ b/configs/px30-core-ctouch2-of10-px30_defconfig
> @@ -0,0 +1,108 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
> +CONFIG_SPL_TEXT_BASE=0x00000000
> +CONFIG_ROCKCHIP_PX30=y
> +CONFIG_TARGET_PX30_CORE=y
> +CONFIG_DEBUG_UART_CHANNEL=1
> +CONFIG_TPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF160000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
> +CONFIG_SYS_LOAD_ADDR=0x800800
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb"
> +# CONFIG_CONSOLE_MUX is not set
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_MISC_INIT_R=y
> +CONFIG_SPL_BOOTROM_SUPPORT=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +# CONFIG_TPL_BANNER_PRINT is not set
> +CONFIG_SPL_ATF=y
> +# CONFIG_TPL_FRAMEWORK is not set
> +# CONFIG_CMD_BOOTD is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_LZMADEC is not set
> +# CONFIG_CMD_UNZIP is not set
> +CONFIG_CMD_GPT=y
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_ITEST is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_BUF_SIZE=0x04000000
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_ROCKCHIP_OTP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
> +CONFIG_ROCKCHIP_SDRAM_COMMON=y
> +CONFIG_DM_RESET=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> +# CONFIG_SPECIFY_CONSOLE_INDEX is not set
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_SOUND=y
> +CONFIG_SYSRESET=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_LCD=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_TPL_TINY_MEMSET=y
> +CONFIG_LZO=y
> +CONFIG_ERRNO_STR=y
More information about the U-Boot
mailing list