[PATCH] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y

[Marek Vasut]

The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim.
The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE
is enabled, the u-boot.bin does not contain control DT for U-Boot,
and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx
does not contain the DT, and a system where u-boot-with-spl.imx is
written to offset 1024B to the start of storage no longer boots, as
it is missing DT.

In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin
and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim
to generate u-boot-with-spl.imx when OF_SEPARATE is enabled.

Tested-by: Fabio Estevam <festevam at gmail.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Ye Li <ye.li at nxp.com>
Cc: uboot-imx <uboot-imx at nxp.com>
---
 arch/arm/mach-imx/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 1aa26a50ad8..81159eabd24 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@
 quiet_cmd_pad_cat = CAT     $@
 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 
-u-boot-with-spl.imx: SPL u-boot.uim FORCE
+u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.uim,u-boot.img) FORCE
 	$(call if_changed,pad_cat)
 
-u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE
+u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.uim,u-boot.img) FORCE
 	$(call if_changed,pad_cat)
 
 quiet_cmd_u-boot-nand-spl_imx = GEN     $@
-- 
2.29.2