February 2021 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Feb 1 00:55:08 CET 2021
Ending: Sun Feb 28 23:03:13 CET 2021
Messages: 3365

• [PATCH 1/1] sandbox: mark os_abort() as __noreturn   Heinrich Schuchardt
• [PATCH v2 1/1] sandbox: mark os_abort() as noreturn   Heinrich Schuchardt
• Pull request: u-boot-sunxi/master for v2021.04 (part 3)   Andre Przywara
• [PATCH 00/14] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Sean Anderson
• [PATCH 01/14] cmd: sf: Display errno on erase failure   Sean Anderson
• [PATCH 02/14] cmd: sf: Print error on test failure   Sean Anderson
• [PATCH 03/14] mtd: spi-nor-core: Fix typo in documentation   Sean Anderson
• [PATCH 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Sean Anderson
• [PATCH 05/14] spi: spi-mem: Add debug message for spi-mem ops   Sean Anderson
• [PATCH 06/14] spi: dw: Log status register on timeout   Sean Anderson
• [PATCH 07/14] spi: dw: Mask all possible interrupts   Sean Anderson
• [PATCH 08/14] spi: dw: Switch to capabilities   Sean Anderson
• [PATCH 09/14] spi: dw: Rewrite poll_transfer logic   Sean Anderson
• [PATCH 10/14] spi: dw: Add DUAL/QUAD/OCTAL caps   Sean Anderson
• [PATCH 11/14] spi: dw: Add registers necessary for DUAL/QUAD/OCTAL   Sean Anderson
• [PATCH 12/14] spi: dw: Support DUAL/QUAD/OCTAL   Sean Anderson
• [PATCH 13/14] spi: dw: Support clock stretching   Sean Anderson
• [PATCH 14/14] riscv: k210: Enable QSPI for spi3   Sean Anderson
• Please pull u-boot-dm   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH] sunxi: spl: Fix H616 clock initialization   Andre Przywara
• arm64: rk3399: Add support NanoPi R4s   Kever Yang
• [PATCH 1/1] firmware: smci: possible NULL dereference   Heinrich Schuchardt
• [PATCH 1/1] fs/squashfs: NULL dereference in sqfs_closedir()   Heinrich Schuchardt
• arm64: rk3399: Add support NanoPi R4s   Chen-Yu Tsai
• [PATCH 1/2] gitlab: Move the n900 test into its own section   Heinrich Schuchardt
• [PATCH v2] mmc: mmc_spi: Print verbose debug output when crc16 check fails   Bin Meng
• [PATCH 1/2] gitlab: Move the n900 test into its own section   Tom Rini
• [PATCH 0/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Bin Meng
• [PATCH 1/3] mmc: mmc_spi: Move argument check to the beginning of mmc_spi_sendcmd()   Bin Meng
• [PATCH 2/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Bin Meng
• [PATCH 3/3] mmc: mmc_spi: Document the 3 local functions   Bin Meng
• [PATCH 1/3] mmc: mmc_spi: Move argument check to the beginning of mmc_spi_sendcmd()   Jaehoon Chung
• [PATCH 3/3] mmc: mmc_spi: Document the 3 local functions   Jaehoon Chung
• [PATCH 2/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Jaehoon Chung
• [PATCH v2] mmc: mmc_spi: Print verbose debug output when crc16 check fails   Sean Anderson
• [PATCH 01/14] cmd: sf: Display errno on erase failure   Bin Meng
• [PATCH 02/14] cmd: sf: Print error on test failure   Bin Meng
• [PATCH 03/14] mtd: spi-nor-core: Fix typo in documentation   Bin Meng
• [PATCH 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Bin Meng
• [PATCH 05/14] spi: spi-mem: Add debug message for spi-mem ops   Bin Meng
• [PATCH 14/14] riscv: k210: Enable QSPI for spi3   Bin Meng
• [PATCH] configs: am335x_evm: enable CONFIG_SPL_ALLOC_BD   Lokesh Vutla
• [PATCH] remoteproc: k3_r5: Sync to upstreamed kernel DT property names   Lokesh Vutla
• [PATCH] mtd: spi-nor.h: Change spaces to tabs   Bin Meng
• [PATCH] sunxi: spl: Fix H616 clock initialization   Jernej Škrabec
• [PATCH 0/3] arm: dts: k3: Sync TI's K3 related dts nodes   Lokesh Vutla
• [PATCH 1/3] arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot   Lokesh Vutla
• [PATCH 2/3] arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot   Lokesh Vutla
• [PATCH 3/3] arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot   Lokesh Vutla
• [PATCH 05/17] x86: tsc_timer: Correct overflow in __udelay()   Bin Meng
• [PATCH 13/17] x86: coral: Add a devicetree node for eMMC   Bin Meng
• [PATCH 05/17] x86: tsc_timer: Correct overflow in __udelay()   Bin Meng
• [PATCH 13/17] x86: coral: Add a devicetree node for eMMC   Bin Meng
• [PATCH] x86: Reduce size of samus image   Bin Meng
• [PATCH] acpi: Tidy up documentation for struct acpi_gpio   Bin Meng
• [PATCH] acpi: Tidy up documentation for struct acpi_gpio   Bin Meng
• [PATCH v2 04/12] x86: Make sure the SPL image ends on a suitable boundary   Bin Meng
• [PATCH v2 00/12] x86: Minor improvements mostly for image loading   Bin Meng
• [PATCH v2] sysboot: add zboot support to boot x86 Linux kernel image   Bin Meng
• [PATCH v3 01/12] README: Add doumentation for version information   Bin Meng
• [PATCH v3 12/12] smbios: Allow a few values to come from sysinfo   Bin Meng
• [PATCH v3 07/12] smbios: Drop the eos parameter   Bin Meng
• [PATCH v3 09/12] smbios: Add more options for the BIOS version string   Bin Meng
• [PATCH v3 11/12] x86: coral: Add sysinfo ops   Bin Meng
• [PATCH] x86: Reduce size of samus image   Bin Meng
• Xilinx ZynqMP SPL boot: psu_init_gpl.c code corrupts U-Boot memory   Michal Simek
• [PATCH] fastboot: add UUU command UCmd and ACmd support   Lukasz Majewski
• [PATCH v2 1/9] mmc: sandbox: Add support for writing   Lukasz Majewski
• [PATCH 04/11] dm: Remove uses of device_bind_offset()   Eugen.Hristev at microchip.com
• [PATCH 4/4] fs: fat: remove trailing periods from long name   AKASHI Takahiro
• [PATCH] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [PATCH v2] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [PATCH 0/3] Add mmc-pwrseq file to use common function   Jaehoon Chung
• [PATCH 1/3] mmc: pwrseq: add mmc-pwrseq file to provide a generic interface   Jaehoon Chung
• [PATCH 2/3] mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq   Jaehoon Chung
• [PATCH 3/3] mmc: rockchip_dw_mmc: use mmc_pwrseq instead of rockchip_mmc_pwrseq   Jaehoon Chung
• Please pull u-boot-x86   Bin Meng
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   ZHIZHIKIN Andrey
• [QUESTION] Kernel 5.10 image might be too big to be loaded by U-Boot on RPi 4B   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   Bough Chen
• [PATCH] env: sf: single function env_sf_save()   Harry Waschkeit
• MX6sabresd broken since v2019.04   Marek Vasut
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH] rpi: limit size of the RAM to the multiple of the MMU_SECTION_SIZE   Marek Szyprowski
• MX6sabresd broken since v2019.04   Marek Vasut
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   ZHIZHIKIN Andrey
• MX6sabresd broken since v2019.04   Marek Vasut
• [PATCH 04/11] dm: Remove uses of device_bind_offset()   Simon Glass
• [PATCH v2 1/1] env: sf: single function env_sf_save()   Harry Waschkeit
• [PATCH v2 1/1] env: sf: single function env_sf_save()   Stefan Roese
• [PATCH 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Pratyush Yadav
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH 04/11] dm: Remove uses of device_bind_offset()   Eugen.Hristev at microchip.com
• [PATCH v2 1/1] env: sf: single function env_sf_save()   Harry Waschkeit
• MX6sabresd broken since v2019.04   Marek Vasut
• [PATCH 05/14] spi: spi-mem: Add debug message for spi-mem ops   Pratyush Yadav
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH 03/14] mtd: spi-nor-core: Fix typo in documentation   Pratyush Yadav
• [PATCH 4/4] fs: fat: remove trailing periods from long name   Heinrich Schuchardt
• [PATCH 01/14] cmd: sf: Display errno on erase failure   Pratyush Yadav
• [PATCH 02/14] cmd: sf: Print error on test failure   Pratyush Yadav
• MX6sabresd broken since v2019.04   Marek Vasut
• MX6sabresd broken since v2019.04   Fabio Estevam
• MX6sabresd broken since v2019.04   Marek Vasut
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y   Marek Vasut
• MX6sabresd broken since v2019.04   Marek Vasut
• [PATCH v2 05/40] doc: Document how sandbox_spl_tests are run   Pratyush Yadav
• [PATCH 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Sean Anderson
• [PATCH 1/5] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Pali Rohár
• [PATCH 00/13] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [PATCH v3] sysboot: add zboot support to boot x86 Linux kernel image   Kory Maincent
• [PATCH 05/14] spi: spi-mem: Add debug message for spi-mem ops   Sean Anderson
• [PATCH v2 0/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT   Sean Anderson
• Pull request: u-boot-sunxi/master for v2021.04 (part 3)   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [ANN] U-Boot v2021.04-rc1 released   Tom Rini
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH 05/14] spi: spi-mem: Add debug message for spi-mem ops   Pratyush Yadav
• [PATCH v3 0/9] fastboot: Add better support for specifying partitions   Sean Anderson
• [PATCH v3 1/9] mmc: sandbox: Add support for writing   Sean Anderson
• MX6sabresd broken since v2019.04   Marek Vasut
• [PATCH v3 2/9] test: dm: Add test for fastboot mmc partition naming   Sean Anderson
• [PATCH v3 3/9] part: Give several functions more useful return values   Sean Anderson
• [PATCH v3 4/9] part: Support getting whole disk from part_get_info_by_dev_and_name_or_num   Sean Anderson
• [PATCH v3 5/9] part: Support string block devices in part_get_info_by_dev_and_name   Sean Anderson
• [PATCH v3 6/9] fastboot: Remove mmcpart argument from raw_part_get_info_by_name   Sean Anderson
• [PATCH v3 7/9] fastboot: Move part_get_info_by_name_or_alias after raw_part_get_info_by_name   Sean Anderson
• [PATCH v3 8/9] fastboot: Allow u-boot-style partitions   Sean Anderson
• [PATCH v3 9/9] fastboot: Partition specification   Sean Anderson
• [PATCH v2 1/9] mmc: sandbox: Add support for writing   Sean Anderson
• [PATCH v2 26/40] test: Use a local variable for test state   Alex G.
• [PATCH] MAINTAINERS: Add maintainer to network subsystem   Joe Hershberger
• [PATCH v2] sunxi: spl: Fix H616 clock initialization   Jernej Skrabec
• MX6sabresd broken since v2019.04   Fabio Estevam
• [PATCH v2 1/8] spl: Drop duplicate 'Jumping to U-Boot' message   Pratyush Yadav
• [PATCH 10/14] spi: dw: Add DUAL/QUAD/OCTAL caps   Sean Anderson
• [PATCH v4 6/9] mtd: spi-nor-core: Add overlaid sector erase feature   Pratyush Yadav
• [PATCH v4 8/9] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Tom Rini
• [PATCH] env: Fix warning when forcing environment without ENV_ACCESS_IGNORE_FORCE   Tom Rini
• [PATCH v4 9/9] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH V2] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y   Marek Vasut
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Simon Glass
• [PATCH 1/1] .gitlab-ci: install doc/sphinx/requirements.txt   Simon Glass
• [PATCH v5 1/4] dt-bindings: input: adc-keys bindings documentation   Simon Glass
• [PATCH v5 3/4] adc: meson-saradc: add support for getting reference voltage value   Simon Glass
• [PATCH v5 4/4] configs: khadas-vim3(l): enable Function button support   Simon Glass
• [PATCH 10/11] pinctrl: single: add get_pin_muxing operation   Simon Glass
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Simon Glass
• [PATCH 1/1] doc: update Kernel documentation build system   Simon Glass
• [PATCH v2 1/4] doc: board: fix Microchip MPFS Icicle Kit doc   Simon Glass
• [PATCH v2 4/4] doc: update Kernel documentation build system   Simon Glass
• [PATCH v2 2/4] doc: fix doc/develop/logging.rst   Simon Glass
• [PATCH v2 3/4] .gitlab-ci: install doc/sphinx/requirements.txt   Simon Glass
• [PATCH] arm: Remove #include <version.h> from armv8/fwcall.c   Simon Glass
• [PATCH] tools: Remove #include <version.h>   Simon Glass
• [PATCH] version: Move version_string[] from version.h to version_string.h   Simon Glass
• [PATCH v2 1/2] stdio: Introduce stdio_valid()   Simon Glass
• [PATCH v5 6/6] test/py: ecdsa: Add test for mkimage ECDSA signing   Simon Glass
• [PATCH v1 1/7] command sf: help text format   Simon Glass
• [PATCH v1 2/7] sf protect: warn about failed (un)lock operation   Simon Glass
• [PATCH v1 7/7] provide "sf protect check" command   Simon Glass
• [PATCH v1 1/7] command sf: help text format   Simon Glass
• [PATCH v1 7/7] provide "sf protect check" command   Simon Glass
• [PATCH v4 0/6] Add support for ECDSA image signing (with test)   Simon Glass
• [PATCH 1/2] board: samsung: covert to driver model about power_key_pressed   Simon Glass
• [PATCH 2/2] power: pmic: remove pmic_max8997/8 files   Simon Glass
• [PATCH v2 07/12] pinctrl: single: change function mask default value   Simon Glass
• [PATCH v2 08/12] pinctrl: single: add register access functions   Simon Glass
• [PATCH v2 11/12] pinctrl: single: add get_pin_muxing operation   Simon Glass
• [PATCH v1] fix patman --limit-cc option   Simon Glass
• [PATCH 1/1] fs: fat: usage basename in file_fat_write_at, fat_mkdir   Simon Glass
• [PATCH v2] test/py: fix runtest wrapper for pytest 6   Simon Glass
• [PATCH] azure: Add -E back for the world build script   Simon Glass
• [PATCH 1/1] sandbox: host bind must close file descriptor   Simon Glass
• [PATCH 1/1] doc: dm: describe end of life of plat_auto   Simon Glass
• [PATCH v2 10/10] bdinfo: Change to use bdinfo_print_num_ll() where the number could be 64-bit   Simon Glass
• [PATCH v2 1/1] sandbox: mark os_abort() as noreturn   Simon Glass
• [PATCH 1/1] firmware: smci: possible NULL dereference   Simon Glass
• [PATCH v3] sysboot: add zboot support to boot x86 Linux kernel image   Simon Glass
• [ANN] U-Boot v2021.04-rc1 released   Simon Glass
• [PATCH 1/5] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Marek Vasut
• [PATCH] env: increment redund flag on read fail   Tom Rini
• [PATCH 1/1] sandbox: host bind must close file descriptor   Heinrich Schuchardt
• [PATCH] tools: Remove #include <version.h>   Tom Rini
• [PATCH 1/1] sandbox: host bind must close file descriptor   Simon Glass
• [PATCH 2/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Jaehoon Chung
• [PATCH v5 01/20] mmc: sdhci: Add helper functions for UHS modes   Jaehoon Chung
• [PATCH v5] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH v3 9/9] fastboot: Partition specification   Heinrich Schuchardt
• [PATCH v3 9/9] fastboot: Partition specification   Sean Anderson
• [PATCH 4/4] fs: fat: remove trailing periods from long name   AKASHI Takahiro
• IPv6 Support   Raymond Yeung
• [PATCH v3] mmc: mmc_spi: Print verbose debug output when crc16 check fails   Bin Meng
• [PATCH v2 0/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Bin Meng
• [PATCH v2 1/3] mmc: mmc_spi: Move argument check to the beginning of mmc_spi_sendcmd()   Bin Meng
• [PATCH v2 2/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Bin Meng
• [PATCH v2 3/3] mmc: mmc_spi: Document the 3 local functions   Bin Meng
• [PATCH] spi: imx: Implement set_speed   Bin Meng
• [PATCH] nvme: Fix cache alignment   Bin Meng
• Intermittent failure with test_efi_selftest_text_input   Bin Meng
• [v3 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO   Priyanka Jain (OSS)
• [PATCH 4/4] fs: fat: remove trailing periods from long name   Heinrich Schuchardt
• Subject: [PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Priyanka Jain (OSS)
• [PATCH 4/4] fs: fat: remove trailing periods from long name   AKASHI Takahiro
• [PATCH] mmc: mv_sdhci: parse device-tree entry   Baruch Siach
• [PATCH 4/4] fs: fat: remove trailing periods from long name   Heinrich Schuchardt
• [PATCH] x86: qemu: Fix broken multi-core boot   Bin Meng
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [v3 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO   Biwen Li (OSS)
• [PATCH v3 1/1] env: sf: single function env_sf_save()   Harry Waschkeit
• [v4 00/33] gpio: layerscape: fix gpio and enable gpio   Biwen Li
• [v4 01/33] gpio: mpc8xxx_gpio: Fix for litte endian   Biwen Li
• [v4 02/33] arm: dts: ls1021a: add gpio node   Biwen Li
• [v4 03/33] arm64: dts: ls1012a: add gpio node   Biwen Li
• [v4 04/33] arm64: dts: ls1028a: add gpio node   Biwen Li
• [v4 05/33] arm64: dts: ls1043a: add gpio node   Biwen Li
• [v4 06/33] arm64: dts: ls1046a: add gpio node   Biwen Li
• [v4 07/33] arm64: dts: ls1088a: add gpio node   Biwen Li
• [v4 08/33] arm64: dts: ls208xa: add gpio node   Biwen Li
• [v4 09/33] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 10/33] configs: ls1043a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 11/33] configs: ls1028a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 12/33] configs: ls1088a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 13/33] configs: ls208xa: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 14/33] configs: lx2160a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 15/33] configs: ls1046a: enable MPC8XXX_GPIO   Biwen Li
• [v4 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 17/33] configs: ls1021aqds: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v4 18/33] configs: ls1012afrwy: enable CMD_GPIO   Biwen Li
• [v4 19/33] configs: ls1012ardb: enable CMD_GPIO   Biwen Li
• [v4 20/33] configs: ls1021aqds: enable CMD_GPIO   Biwen Li
• [v4 21/33] configs: ls1021atwr: enable CMD_GPIO   Biwen Li
• [v4 22/33] configs: ls1028aqds: enable CMD_GPIO   Biwen Li
• [v4 23/33] configs: ls1028ardb: enable CMD_GPIO   Biwen Li
• [v4 24/33] configs: ls1043aqds: enable CMD_GPIO   Biwen Li
• [v4 25/33] configs: ls1043ardb: enable CMD_GPIO   Biwen Li
• [v4 26/33] configs: ls1046ardb: enable CMD_GPIO   Biwen Li
• [v4 27/33] configs: ls1046aqds: enable CMD_GPIO   Biwen Li
• [v4 28/33] configs: ls2088ardb: enable DM_GPIO and CMD_GPIO   Biwen Li
• [v4 29/33] configs: ls2088aqds: enable CMD_GPIO   Biwen Li
• [v4 30/33] configs: ls1088aqds: enable DM_GPIO and CMD_GPIO   Biwen Li
• [v4 31/33] configs: ls1088ardb: enable DM_GPIO and CMD_GPIO   Biwen Li
• [v4 32/33] configs: lx2160ardb: enable CMD_GPIO   Biwen Li
• [v4 33/33] configs: lx2160aqds: enable CMD_GPIO   Biwen Li
• [QUESTION] Kernel 5.10 image might be too big to be loaded by U-Boot on RPi 4B   Matthias Brugger
• [PATCH] clk: at91: compat: partially revert "dm: Remove uses of device_bind_offset()"   Eugen Hristev
• [PATCH] nvme: Fix cache alignment   Bin Meng
• [PATCH] mmc: mv_sdhci: parse device-tree entry   Jaehoon Chung
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• [PATCH] nvme: Fix cache alignment   Bin Meng
• [PATCH v3 1/1] env: sf: single function env_sf_save()   Stefan Roese
• [PATCH v3] sysboot: add zboot support to boot x86 Linux kernel image   Köry Maincent
• [PATCH v3] sysboot: add zboot support to boot x86 Linux kernel image   Bin Meng
• [PATCH 1/5] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Biju Das
• [PATCH V2] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y   Christoph Niedermaier
• [PATCH v4 1/3] sysboot: add zboot support to boot x86 Linux kernel image   Kory Maincent
• [PATCH v4 2/3] command.h: Clean-up patch, remove extern from the header   Kory Maincent
• [PATCH v4 3/3] pxe_utils: clean-up, replace ifdef by IS_ENABLED   Kory Maincent
• [PATCH] xilinx: common: Fix CONFIG_XILINX_OF_BOARD_DTB_ADDR handling for ZynqMP   Michal Simek
• [PATCH 0/5] lmb: Add config for the number of memory and reserved regions   Patrick Delaunay
• [PATCH 1/5] lmb: move CONFIG_LMB in Kconfig   Patrick Delaunay
• [PATCH 2/5] lmb: remove lmb_region.size   Patrick Delaunay
• [PATCH 3/5] lmb: Move lmb property arrays in struct lmb   Patrick Delaunay
• [PATCH 4/5] lmb: Add 2 config to define the max number of regions   Patrick Delaunay
• [PATCH 5/5] configs: stm32mp15: increase the number of reserved memory region in lmb   Patrick Delaunay
• [PATCH 1/5] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH] nvme: Fix cache alignment   Andre Przywara
• [PATCH v4 1/3] sysboot: add zboot support to boot x86 Linux kernel image   Bin Meng
• [PATCH v4 2/3] command.h: Clean-up patch, remove extern from the header   Bin Meng
• [PATCH v4 3/3] pxe_utils: clean-up, replace ifdef by IS_ENABLED   Bin Meng
• [PATCH V2 1/6] dt-bindings: Sync versaclock.h with upcoming 5.12-rc1   Adam Ford
• [PATCH V2 2/6] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH V2 3/6] arm: dts: r8a774e1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH V2 4/6] arm: dts: r8a774b1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH V2 5/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev Kit   Adam Ford
• [PATCH V2 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev Kit   Adam Ford
• [QUESTION] Kernel 5.10 image might be too big to be loaded by U-Boot on RPi 4B   Tom Rini
• MX6sabresd broken since v2019.04   Heiko Schocher
• MX6sabresd broken since v2019.04   Fabio Estevam
• ext4 metadata checksums   Fredrik Hallenberg
• Documentation page shows "The Linux Kernel"   Bin Meng
• MX6sabresd broken since v2019.04   Heiko Schocher
• [PATCH] tools/fit_check_sign.c: Update usage function.   Tom Rini
• [PATCH] arm: Remove #include <version.h> from armv8/fwcall.c   Tom Rini
• [PATCH 1/1] cmd: load, emit error message for invalid block device   Tom Rini
• [PATCH v2] common: Kconfig.boot: Add FIT_PRINT config option   Tom Rini
• [PATCH v2] disk: part_dos: update partition table entries after write   Tom Rini
• [PATCH] MAINTAINERS: Add maintainer to network subsystem   Tom Rini
• [PATCH v2] test/py: fix runtest wrapper for pytest 6   Tom Rini
• [PATCH] azure: Add -E back for the world build script   Tom Rini
• [PATCH v3 1/1] env: sf: single function env_sf_save()   Harry Waschkeit
• [PATCH v3 1/1] env: sf: single function env_sf_save()   Stefan Roese
• [PATCH] cmd: mvebu/bubt: Fix default options in help   Stefan Roese
• [PATCH] version: Move version_string[] from version.h to version_string.h   Stefan Roese
• [PATCH] arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz   Stefan Roese
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Stefan Roese
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Pali Rohár
• [PATCH v4 0/9] fastboot: Add better support for specifying partitions   Sean Anderson
• [PATCH v4 1/9] mmc: sandbox: Add support for writing   Sean Anderson
• [PATCH v4 2/9] test: dm: Add test for fastboot mmc partition naming   Sean Anderson
• [PATCH v4 3/9] part: Give several functions more useful return values   Sean Anderson
• [PATCH v4 4/9] part: Support getting whole disk from part_get_info_by_dev_and_name_or_num   Sean Anderson
• [PATCH v4 5/9] part: Support string block devices in part_get_info_by_dev_and_name   Sean Anderson
• [PATCH v4 6/9] fastboot: Remove mmcpart argument from raw_part_get_info_by_name   Sean Anderson
• [PATCH v4 7/9] fastboot: Move part_get_info_by_name_or_alias after raw_part_get_info_by_name   Sean Anderson
• [PATCH v4 8/9] fastboot: Allow u-boot-style partitions   Sean Anderson
• [PATCH v4 9/9] fastboot: Partition specification   Sean Anderson
• [PATCH 1/5] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Marek Vasut
• [PATCH v5 1/3] command.h: Clean-up patch, remove extern from the header   Kory Maincent
• [PATCH v5 2/3] pxe_utils: clean-up, replace ifdef by IS_ENABLED   Kory Maincent
• [PATCH v5 3/3] sysboot: add zboot support to boot x86 Linux kernel image   Kory Maincent
• [PATCH] xilinx: Show silicon version in SPL   Michal Simek
• [PATCH v5] net: tftp: Add client support for RFC 7440   Suneel Garapati
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Andre Heider
• [PATCH] nvme: Fix cache alignment   Andre Przywara
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Stefan Roese
• [PATCH v3 1/1] env: sf: single function env_sf_save()   Harry Waschkeit
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Andre Heider
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Marek Behún
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Baruch Siach
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Marek Behún
• [PATCH v5] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH 1/1] efi_loader: only check size if EFI_DT_APPLY_FIXUPS   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: install UEFI System Partition GUID   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: use GUID to find ESP in dtbdump   Heinrich Schuchardt
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [PATCH v5] net: tftp: Add client support for RFC 7440   Suneel Garapati
• [PATCH v2 1/1] sandbox: host bind must close file descriptor   Heinrich Schuchardt
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Jaehoon Chung
• [PATCH] tools: Remove #include <version.h>   Pali Rohár
• [PATCH v5 01/20] mmc: sdhci: Add helper functions for UHS modes   Aswath Govindraju
• [PATCH v3 1/1] env: sf: single function env_sf_save()   Stefan Roese
• [PATCH v5 01/20] mmc: sdhci: Add helper functions for UHS modes   Aswath Govindraju
• [PATCH v5 1/3] command.h: Clean-up patch, remove extern from the header   Bin Meng
• [PATCH v5 2/3] pxe_utils: clean-up, replace ifdef by IS_ENABLED   Bin Meng
• [PATCH v5 3/3] sysboot: add zboot support to boot x86 Linux kernel image   Bin Meng
• [PATCH v5] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH] net: tftp: Avoid sending extra ack on completion   Ramon Fried
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Priyanka Jain
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Andy Shevchenko
• [PATCH] nvme: Fix cache alignment   Andre Przywara
• [PATCH] tools: Remove #include <version.h>   Pali Rohár
• [PATCH v2] spi: zynqmp_gqspi: support dual and quad mode   Ashok Reddy Soma
• [PATCH 0/4] clk: Add support to enable clocks   Michal Simek
• [PATCH 1/4] clk: zynqmp: Add support to enable clocks   Michal Simek
• [PATCH 2/4] i2c: i2c_cdns: Enable i2c clock   Michal Simek
• [PATCH 3/4] clk: versal: Add support to enable clocks   Michal Simek
• [PATCH 4/4] net: gem: Enable ethernet rx clock for versal   Michal Simek
• [PATCH] rpi: limit size of the RAM to the multiple of the MMU_SECTION_SIZE   Nicolas Saenz Julienne
• [PATCH v1] usb: kbd: destroy device after console is stopped   Nicolas Saenz Julienne
• [PATCH v2] spi: zynqmp_gqspi: support dual and quad mode   Bin Meng
• [PATCH v2] spi: zynqmp_gqspi: support dual and quad mode   Michal Simek
• [PATCH v2] spi: zynqmp_gqspi: support dual and quad mode   Michal Simek
• [PATCH v3 00/41] test: Refactor tests to have a single test runner   Simon Glass
• [PATCH v3 01/41] doc: Tidy up testing section   Simon Glass
• [PATCH v3 02/41] doc: Document make tcheck   Simon Glass
• [PATCH v3 03/41] sandbox: Drop the 'starting...' message unless testing   Simon Glass
• [PATCH v3 04/41] test: Re-enable test_ofplatdata   Simon Glass
• [PATCH v3 05/41] doc: Explain how to run tests without pytest   Simon Glass
• [PATCH v3 06/41] doc: Document how sandbox_spl_tests are run   Simon Glass
• [PATCH v3 07/41] test: Correct setexpr test prefix   Simon Glass
• [PATCH v3 08/41] test: Mark all driver model tests with a flag   Simon Glass
• [PATCH v3 09/41] test: Rename test-main.c to test-dm.c   Simon Glass
• [PATCH v3 10/41] test: Add an overall test runner   Simon Glass
• [PATCH v3 11/41] test: Create pre/post-run functions   Simon Glass
• [PATCH v3 12/41] test: Call test_pre/post_run() from driver model tests   Simon Glass
• [PATCH v3 13/41] test: Move dm_extended_scan() to test_pre_run()   Simon Glass
• [PATCH v3 14/41] test: Move do_autoprobe() to test_pre_run()   Simon Glass
• [PATCH v3 15/41] test: Move dm_scan_plat() to test_pre_run()   Simon Glass
• [PATCH v3 16/41] test: Drop mallinfo() work-around   Simon Glass
• [PATCH v3 17/41] test: Move console silencing to test_pre_run()   Simon Glass
• [PATCH v3 18/41] test: Move delay skipping to test_pre_run()   Simon Glass
• [PATCH v3 19/41] test: Handle driver model reinit in test_pre_run()   Simon Glass
• [PATCH v3 20/41] test: Drop struct dm_test_state   Simon Glass
• [PATCH v3 21/41] test: Move dm_test_init() into test-main.c   Simon Glass
• [PATCH v3 22/41] test: Move dm_test_destroy() into test-main.c   Simon Glass
• [PATCH v3 23/41] test: Move test running into a separate function   Simon Glass
• [PATCH v3 24/41] test: Use ut_run_test() to run driver model tests   Simon Glass
• [PATCH v3 25/41] test: Drop dm_do_test()   Simon Glass
• [PATCH v3 26/41] test: Add ut_run_test_live_flat() to run tests twice   Simon Glass
• [PATCH v3 27/41] test: Use a local variable for test state   Simon Glass
• [PATCH v3 28/41] test: Run driver-model tests using ut_run_list()   Simon Glass
• [PATCH v3 29/41] test: Use return values in dm_test_run()   Simon Glass
• [PATCH v3 30/41] test: Move the devicetree check into ut_run_list()   Simon Glass
• [PATCH v3 31/41] test: Move restoring of driver model state to ut_run_list()   Simon Glass
• [PATCH v3 32/41] test: log: Rename log main test file to log_ut.c   Simon Glass
• [PATCH v3 33/41] test: Add a macros for finding tests in linker_lists   Simon Glass
• [PATCH v3 34/41] test: Rename all linker lists to have a ut_ prefix   Simon Glass
• [PATCH v3 35/41] test: Allow SPL to run any available test   Simon Glass
• [PATCH v3 36/41] sandbox: Update os_find_u_boot() to find the .img file   Simon Glass
• [PATCH v3 37/41] spl: Convert spl_fit to work with sandbox   Simon Glass
• [PATCH v3 38/41] doc: Move coccinelle into its own section   Simon Glass
• [PATCH v3 39/41] spl: test: Add a test for spl_load_simple_fit()   Simon Glass
• [PATCH v3 40/41] test: sandbox: Move sandbox test docs into doc/develop   Simon Glass
• [PATCH v3 41/41] doc: Explain briefly how to write new tests   Simon Glass
• [PATCH V3 1/6] dt-bindings: Sync versaclock.h with upcoming 5.12-rc1   Adam Ford
• [PATCH V3 2/6] arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH V3 3/6] arm: dts: r8a774e1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH V3 4/6] arm: dts: r8a774b1: Import DTS queued for Linux 5.12-rc1   Adam Ford
• [PATCH V3 5/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev Kit   Adam Ford
• [PATCH V3 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev Kit   Adam Ford
• [PATCH] clk: at91: compat: partially revert "dm: Remove uses of device_bind_offset()"   Simon Glass
• [PATCH v5 1/3] command.h: Clean-up patch, remove extern from the header   Simon Glass
• [PATCH v5 2/3] pxe_utils: clean-up, replace ifdef by IS_ENABLED   Simon Glass
• [PATCH] x86: qemu: Fix broken multi-core boot   Simon Glass
• [PATCH v2 00/33] dm: Add dtoc implementation of device instantiation (part D)   Simon Glass
• [PATCH v2 01/33] bootstage: Fix dependency for BOOTSTAGE_RECORD_COUNT   Simon Glass
• [PATCH v2 02/33] dtoc: Scan drivers for available information   Simon Glass
• [PATCH v2 03/33] dtoc: Save scan information across test runs   Simon Glass
• [PATCH v2 04/33] dtoc: Ignore unwanted files when scanning for drivers   Simon Glass
• [PATCH v2 05/33] dtoc: Collect priv/plat struct info from drivers   Simon Glass
• [PATCH v2 06/33] dtoc: Support scanning of uclasses   Simon Glass
• [PATCH v2 07/33] dtoc: Support scanning of structs in header files   Simon Glass
• [PATCH v2 08/33] dtoc: Move test files into a test/ directory   Simon Glass
• [PATCH v2 09/33] dtoc: Rename sandbox_i2c_test and sandbox_pmic_test   Simon Glass
• [PATCH v2 10/33] dtoc: Add some extra properties to nodes   Simon Glass
• [PATCH v2 11/33] dtoc: Make use of node properties   Simon Glass
• [PATCH v2 12/33] dtoc: Process nodes to set up required properties   Simon Glass
• [PATCH v2 13/33] dtoc: Track nodes which are actually used   Simon Glass
• [PATCH v2 14/33] dtoc: Support tracking the phase of U-Boot   Simon Glass
• [PATCH v2 15/33] Makefile: Pass the U-Boot phase to dtoc   Simon Glass
• [PATCH v2 16/33] dtoc: Support headers needed for drivers   Simon Glass
• [PATCH v2 17/33] dtoc: Process driver aliases along with drivers   Simon Glass
• [PATCH v2 18/33] dtoc: Warn of duplicate drivers   Simon Glass
• [PATCH v2 19/33] dtoc: Read aliases for uclasses   Simon Glass
• [PATCH v2 20/33] dtoc: Detect drivers only at the start of start of line   Simon Glass
• [PATCH v2 21/33] dtoc: Assign a sequence number to each node   Simon Glass
• [PATCH v2 22/33] dtoc: Set up the uclasses that are used   Simon Glass
• [PATCH v2 23/33] dtoc: Support processing the root node   Simon Glass
• [PATCH v2 24/33] dtoc: Add an option for device instantiation   Simon Glass
• [PATCH v2 25/33] dm: of-platadata: Add option for device instantiation   Simon Glass
• [PATCH v2 26/33] dtoc: Add support for decl file   Simon Glass
• [PATCH v2 27/33] dtoc: Don't generate platform data with instantiation   Simon Glass
• [PATCH v2 28/33] sandbox: Make sandbox,emul more conventional   Simon Glass
• [PATCH v2 29/33] sandbox: i2c: Rename driver names to work with of-platdata   Simon Glass
• [PATCH v2 30/33] dtoc: Tidy up the list of supported phandle properties   Simon Glass
• [PATCH v2 31/33] dtoc: Generate a summary in the dt-plat.c file   Simon Glass
• [PATCH v2 32/33] dtoc: Generate uclass devices   Simon Glass
• [PATCH v2 33/33] dtoc: Generate device instances   Simon Glass
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [PATCH 1/2] lib: Fix BINMAN_FDT dependency   Bin Meng
• [PATCH 2/2] dts: Fix OF_LIVE dependency   Bin Meng
• [PATCH] serial: ns16550: Correct the base address type   Bin Meng
• [PATCH v5 2/3] pxe_utils: clean-up, replace ifdef by IS_ENABLED   Bin Meng
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Marek Behun
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Tom Rini
• [PATCHv2] common: Drop asm/global_data.h from common header   Tom Rini
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Tom Rini
• [PATCH v3 06/41] doc: Document how sandbox_spl_tests are run   Pratyush Yadav
• [PATCH] serial: ns16550: Handle zero <clock-frequency> value   Bin Meng
• [PATCH] x86: qemu: Fix broken multi-core boot   Bin Meng
• [PATCH 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Alexandru Gagniuc
• [PATCH 2/5] spl: Introduce spl_board_prepare_for_optee() hook   Alexandru Gagniuc
• [PATCH 3/5] arm: stm32mp: Implement support for TZC 400 controller   Alexandru Gagniuc
• [PATCH 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE   Alexandru Gagniuc
• [PATCH 5/5] ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb   Alexandru Gagniuc
• [PATCH v1] test: Include /sbin to the PATH when creating ext4 disk image   Andy Shevchenko
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH 1/1] env: sf: add support for env erase   Harry Waschkeit
• [PATCH 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Tom Rini
• [PATCH 2/5] spl: Introduce spl_board_prepare_for_optee() hook   Tom Rini
• [PATCH] env: Fix warning when forcing environment without ENV_ACCESS_IGNORE_FORCE   Marek Vasut
• [PATCH v2 00/37] dm: Implement OF_PLATDATA_INST in driver model (part E)   Simon Glass
• [PATCH v2 01/37] sandbox: Drop debug message in os_spl_to_uboot()   Simon Glass
• [PATCH v2 02/37] linker_lists: Allow use in data structures   Simon Glass
• [PATCH v2 03/37] dm: core: Add macros to access the new linker lists   Simon Glass
• [PATCH v2 04/37] dm: core: Allow dropping run-time binding of devices   Simon Glass
• [PATCH v2 05/37] dm: core: Adjust uclass setup with of-platdata   Simon Glass
• [PATCH v2 06/37] dm: core: Set up driver model for OF_PLATDATA_INST   Simon Glass
• [PATCH v2 07/37] dm: core: Skip adding uclasses with OF_PLATDATA_INST   Simon Glass
• [PATCH v2 08/37] dm: Add the new dtoc-generated files to the build   Simon Glass
• [PATCH v2 09/37] dm: core: Include dt-decl.h automatically   Simon Glass
• [PATCH v2 10/37] dm: test: Avoid destroying uclasses with of-platdata-inst   Simon Glass
• [PATCH v2 11/37] clk: sandbox: Move priv/plat data to a header file   Simon Glass
• [PATCH v2 12/37] clk: fixed-rate: Export driver parts for OF_PLATDATA_INST   Simon Glass
• [PATCH v2 13/37] clk: sandbox: Create a special fixed-rate driver   Simon Glass
• [PATCH v2 14/37] dm: core: Drop device_get_by_driver_info()   Simon Glass
• [PATCH v2 15/37] dm: core: Drop uclass_find_device_by_phandle() with of-platdata   Simon Glass
• [PATCH v2 16/37] sandbox: i2c: Move platdata structs to header files   Simon Glass
• [PATCH v2 17/37] dm: Rename device_get_by_driver_info_idx()   Simon Glass
• [PATCH v2 18/37] sandbox_spl: Increase SPL malloc() size   Simon Glass
• [PATCH v2 19/37] sandbox: i2c: Support i2c emulation with of-platdata   Simon Glass
• [PATCH v2 20/37] Revert "sandbox: Disable I2C emulators in SPL"   Simon Glass
• [PATCH v2 21/37] sandbox: Create a new sandbox_noinst build   Simon Glass
• [PATCH v2 22/37] test: Run sandbox_spl tests on sandbox_noinst   Simon Glass
• [PATCH v2 23/37] azure/gitlab: Add tests for sandbox_noinst   Simon Glass
• [PATCH v2 24/37] dm: core: Add an option to support SPL in read-only memory   Simon Glass
• [PATCH v2 25/37] dm: core: Create a struct for device runtime info   Simon Glass
• [PATCH v2 26/37] dm: core: Move flags to device-runtime info   Simon Glass
• [PATCH v2 27/37] dm: core: Allow storing priv/plat data separately   Simon Glass
• [PATCH v2 28/37] sandbox: Define a region for device priv/plat data   Simon Glass
• [PATCH v2 29/37] dm: core: Use separate priv/plat data region   Simon Glass
• [PATCH v2 30/37] x86: Define a region for device priv/plat data   Simon Glass
• [PATCH v2 31/37] x86: apl: Fix the header order in pmc   Simon Glass
• [PATCH v2 32/37] x86: apl: Tell of-platdata about a required header file   Simon Glass
• [PATCH v2 33/37] x86: itss: Tidy up bind() for of-platdata-inst   Simon Glass
• [PATCH v2 34/37] x86: Support a fake PCI device with of-platdata-inst   Simon Glass
• [PATCH v2 35/37] x86: Don't include reset driver in SPL   Simon Glass
• [PATCH v2 36/37] x86: coral: Drop ACPI properties from of-platdata   Simon Glass
• [PATCH v2 37/37] x86: apl: Use read-only SPL and new of-platdata   Simon Glass
• [PATCH V2] spi: imx: Implement set_speed   Marek Vasut
• [PATCH] spi: imx: Implement set_speed   Marek Vasut
• [PATCH 1/1] efi_loader: VenMedia device path node   Heinrich Schuchardt
• [PATCH 4/4] net: gem: Enable ethernet rx clock for versal   Ramon Fried
• [PATCH] net: tftp: Avoid sending extra ack on completion   Suneel Garapati
• [PATCH] net: tftp: Avoid sending extra ack on completion   Ramon Fried
• [PATCH v2] net: tftp: Avoid sending extra ack on completion   Ramon Fried
• [PATCH] net: tftp: Avoid sending extra ack on completion   Suneel Garapati
• [PATCH v2] net: tftp: Avoid sending extra ack on completion   Suneel Garapati
• [PATCH] ARM: imx: Revert "dh_imx6: Switch to full DM-aware"   Marek Vasut
• [PATCH] serial: ns16550: Handle zero <clock-frequency> value   Simon Glass
• [PATCH] serial: ns16550: Correct the base address type   Simon Glass
• [PATCH 2/2] dts: Fix OF_LIVE dependency   Simon Glass
• [PATCH 1/2] lib: Fix BINMAN_FDT dependency   Simon Glass
• [PATCH v2 1/1] sandbox: host bind must close file descriptor   Simon Glass
• [PATCH] ARM: imx: Revert "dh_imx6: Switch to full DM-aware"   Tom Rini
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Jaehoon Chung
• [PATCH] rpi: limit size of the RAM to the multiple of the MMU_SECTION_SIZE   Jaehoon Chung
• [PATCH] ARM: imx6: dh-imx6: Enable support for applying DTO   Marek Vasut
• [PATCH] ARM: imx: Revert "dh_imx6: Switch to full DM-aware"   Marek Vasut
• [PATCH v5 01/20] mmc: sdhci: Add helper functions for UHS modes   Jaehoon Chung
• Please pull u-boot-x86   Bin Meng
• [PATCH] ARM: imx6: dh-imx6: Drop the SF hunk in config   Marek Vasut
• [PATCH] serial: ns16550: Handle zero <clock-frequency> value   Bin Meng
• [PATCH V2] spi: imx: Implement set_speed   Bin Meng
• [PATCH] serial: ns16550: Handle zero <clock-frequency> value   Simon Glass
• [PATCH] serial: ns16550: Handle zero <clock-frequency> value   Bin Meng
• [PATCH 1/1] firmware: smci: possible NULL dereference   Simon Glass
• [PATCH v2 1/1] sandbox: mark os_abort() as noreturn   Simon Glass
• [PATCH v2 10/10] bdinfo: Change to use bdinfo_print_num_ll() where the number could be 64-bit   Simon Glass
• [PATCH v2 09/10] bdinfo: Rename function names to be clearer   Simon Glass
• [PATCH v2 08/10] riscv: Change phys_addr_t and phys_size_t to 64-bit   Simon Glass
• [PATCH v2 07/10] fdtdec: Cast prior_stage_fdt_address with uintptr_t   Simon Glass
• [PATCH v2 06/10] net: ftmac100: Cast priv->iobase with uintptr_t   Simon Glass
• [PATCH v2 05/10] riscv: ax25-ae350: Cast addr with uintptr_t   Simon Glass
• [PATCH v2 04/10] serial: sifive: Cast dev_read_addr() with uintptr_t   Simon Glass
• [PATCH v2 03/10] global_data.h: Change ram_top type to phys_addr_t   Simon Glass
• [PATCH v2 02/10] arm: rockchip: Explicitly cast gd->ram_top in dram_init_banksize()   Simon Glass
• [PATCH v2 01/10] riscv: Adjust board_get_usable_ram_top() for 32-bit   Simon Glass
• [PATCH v5 9/9] dm: core: Add documentation about device removal   Simon Glass
• [PATCH v5 8/9] arm: Remove vital devices last   Simon Glass
• [PATCH v5 7/9] dm: core: Add late driver remove option   Simon Glass
• [PATCH v5 6/9] dm: core: Avoid partially removing devices   Simon Glass
• [PATCH v5 5/9] dm: core: Remove children before advising uclass   Simon Glass
• [PATCH v5 4/9] dm: pci: Correct use of wrong flag name   Simon Glass
• [PATCH v5 3/9] dm: Rename DM_FLAG_REMOVE_WITH_PD_ON   Simon Glass
• [PATCH v5 2/9] nand: brcmnand: Don't use -EPROBE_DEFER   Simon Glass
• [PATCH v5 1/9] smem: Don't use -EPROBE_DEFER   Simon Glass
• [PATCH 01/13] arm: nanopi2: Remove unused code   Tom Rini
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Tom Rini
• [PATCH 03/13] arm: layerscape: Disable ATAG support on some platforms   Tom Rini
• [PATCH 04/13] bcmstb: Disable ATAGs support   Tom Rini
• [PATCH 05/13] arm: puma_rk3399: Disable ATAGs support   Tom Rini
• [PATCH 06/13] arm: goni: Disable CONFIG_REVISION_TAG   Tom Rini
• [PATCH 07/13] arm: aspeed: Disable ATAGs support   Tom Rini
• [PATCH 08/13] arm: mediatek: Disable ATAGs support   Tom Rini
• [PATCH 09/13] arm: mvebu: Disable ATAGs support on some platforms   Tom Rini
• [PATCH 10/13] arm: rcar2/3: Disable ATAGs support   Tom Rini
• [PATCH 11/13] arm: s32v234: Disable ATAGs support   Tom Rini
• [PATCH 12/13] arm: socfpga: arria5_secu1: Disable ATAGs support   Tom Rini
• [PATCH 13/13] arm: stm32: Disable ATAGs support   Tom Rini
• [PATCH 1/1] cmd/riscv/sbi: support System Reset Extension   Leo Liang
• [PATCH 14/14] riscv: k210: Enable QSPI for spi3   Leo Liang
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Fabio Estevam
• [PATCH 1/1] cmd/riscv/sbi: support System Reset Extension   Bin Meng
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Tom Rini
• [PATCH 1/2] dm: core: Fix allocation of empty of-platdata   Simon Glass
• [PATCH 2/2] dm: core: Add DM_DEVICE_REMOVE condition to all exit paths   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH 07/14] spi: dw: Mask all possible interrupts   Sean Anderson
• [PATCH v5 01/20] mmc: sdhci: Add helper functions for UHS modes   Aswath Govindraju
• [PATCH v5 01/20] mmc: sdhci: Add helper functions for UHS modes   Jaehoon Chung
• [PATCH v4] arm: fsl: common: Improve NXP VID driver PMBus support   Wasim Khan
• [PATCH] cmd: fdt: skip board specific fixup using env variable   Wasim Khan (OSS)
• [PATCH v2 0/3] fs: fat: avoid invalid filenames   Heinrich Schuchardt
• [PATCH v2 1/3] fs: fat: usage basename in file_fat_write_at, fat_mkdir   Heinrich Schuchardt
• [PATCH v2 2/3] fs: fat: must not write directory '.' and '..'   Heinrich Schuchardt
• [PATCH v2 3/3] fs: fat: remove trailing periods from long name   Heinrich Schuchardt
• [PATCH v2 00/37] dm: Implement OF_PLATDATA_INST in driver model (part E)   Heinrich Schuchardt
• [PATCH 12/13] arm: socfpga: arria5_secu1: Disable ATAGs support   Holger Brunck
• [PATCH 09/13] arm: mvebu: Disable ATAGs support on some platforms   Stefan Roese
• [PATCH] board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants   Marek Szyprowski
• [PATCH v6 00/20] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Aswath Govindraju
• [PATCH v6 01/20] mmc: sdhci: Add helper functions for UHS modes   Aswath Govindraju
• [PATCH v6 02/20] mmc: am654_sdhci: Unconditionally switch off DLL in the beginning of ios_post()   Aswath Govindraju
• [PATCH v6 03/20] mmc: am654_sdhci: Convert flag fields to BIT macro   Aswath Govindraju
• [PATCH v6 04/20] mmc: am654_sdhci: Add flag for PHY calibration   Aswath Govindraju
• [PATCH v6 05/20] mmc: am654_sdhci: Add support for AM65x SR2.0   Aswath Govindraju
• [PATCH v6 06/20] mmc: am654_sdhci: Add support for input tap delay   Aswath Govindraju
• [PATCH v6 07/20] mmc: am654_sdhci: Add support for writing to clkbuf_sel   Aswath Govindraju
• [PATCH v6 08/20] mmc: am654_sdhci: Add support for software tuning   Aswath Govindraju
• [PATCH v6 09/20] mmc: am654_sdhci: Fix HISPD bit configuration in some lower speed modes   Aswath Govindraju
• [PATCH v6 10/20] mmc: am654_sdhci: Use sdhci_set_control_reg()   Aswath Govindraju
• [PATCH v6 11/20] arm: dts: k3-am65: Fix mmc nodes   Aswath Govindraju
• [PATCH v6 12/20] arm: dts: k3-j721e-main: Update otap-delay values   Aswath Govindraju
• [PATCH v6 13/20] arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD card   Aswath Govindraju
• [PATCH v6 14/20] arm: dts: k3-j7200-main: Add support for gpio0   Aswath Govindraju
• [PATCH v6 15/20] arm: dts: k3-j7200-common-proc-board: Enable support for UHS modes   Aswath Govindraju
• [PATCH v6 16/20] configs: j721e_evm: Add support for UHS modes   Aswath Govindraju
• [PATCH v6 17/20] configs: j7200_evm: Add support for UHS modes   Aswath Govindraju
• [PATCH v6 18/20] arm: dts: k3-am65-main: Add itapdly and clkbuf-sel values   Aswath Govindraju
• [PATCH v6 19/20] arm: dts: k3-am654-base-board: Limit Sd card to High speed modes   Aswath Govindraju
• [PATCH v6 20/20] configs: am65x_evm: Add configs for UHS modes   Aswath Govindraju
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Fabio Estevam
• [PATCH] nvme: Fix cache alignment   Andre Przywara
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Marek Szyprowski
• [PATCH 0/3] Add support for the GST ESPRESSOBin-Ultra board   Luka Kovacic
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Luka Kovacic
• [PATCH 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH] usb: host: ehci-vf: Fix portnr initialization   Dominik Wild
• [PATCH] cmd: fdt: skip board specific fixup using env variable   Tom Rini
• Subject:[PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x   Tom Rini
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Tom Rini
• [PATCH v2 01/37] sandbox: Drop debug message in os_spl_to_uboot()   Heinrich Schuchardt
• [PATCH v2 03/37] dm: core: Add macros to access the new linker lists   Heinrich Schuchardt
• [PATCH v2 02/37] linker_lists: Allow use in data structures   Heinrich Schuchardt
• [PATCH v2 04/37] dm: core: Allow dropping run-time binding of devices   Heinrich Schuchardt
• [PATCH v2 18/37] sandbox_spl: Increase SPL malloc() size   Heinrich Schuchardt
• [PATCH] board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants   Neil Armstrong
• [PATCH 2/3] mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq   Neil Armstrong
• [PATCH v2] cmd: fdt: skip board specific fixup using env variable   Wasim Khan
• [PATCH v2 00/37] dm: Implement OF_PLATDATA_INST in driver model (part E)   Simon Glass
• [PATCH v2 5/8] sandbox: Add os_realloc()   Simon Glass
• [PATCH v3 4/4] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Tom Rini
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Fabio Estevam
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Tom Rini
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Marek Behún
• [PATCH] mmc: mv_sdhci: parse device-tree entry   Marek Behún
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Tom Rini
• [PATCH] nvme: Fix cache alignment   Tom Rini
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Tom Rini
• [PATCH 1/4] Respect that some compression algos can be enabled separately for SPL   Tim Harvey
• [PATCH v3 0/9] Various minor fixes   Simon Glass
• [PATCH v3 1/9] spl: Drop duplicate 'Jumping to U-Boot' message   Simon Glass
• [PATCH v3 2/9] binman: Indicate how to make binman verbose   Simon Glass
• [PATCH v3 3/9] doc: describe the md command   Simon Glass
• [PATCH v3 4/9] doc: Add a note about how to produce 'md' output using hexdump   Simon Glass
• [PATCH v3 5/9] s5p4418_nanopi2: Drop dead code   Simon Glass
• [PATCH v3 6/9] sandbox: Add os_realloc()   Simon Glass
• [PATCH v3 7/9] sandbox: Avoid using malloc() for system state   Simon Glass
• [PATCH v3 8/9] sandbox: Write out bloblist when existing   Simon Glass
• [PATCH v3 9/9] bootm: Fix duplicate debugging in bootm_process_cmdline()   Simon Glass
• [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y   Marek Vasut
• [PATCH 1/2] ARM: imx6: mx6sabre-common: Replace fatload with FS_GENERIC load   Marek Vasut
• [PATCH 2/2] ARM: imx6: mx6sabre-common: Search for boot components in /boot too   Marek Vasut
• [PATCH v2 00/12] Add support for pinmux status command on beaglebone   Lokesh Vutla
• [PATCH v6 00/20] Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms   Lokesh Vutla
• [PATCH v3 4/4] board/km: add support for seli8 design based on nxp ls102x   Tom Rini
• [PATCH v3 4/9] doc: Add a note about how to produce 'md' output using hexdump   Pratyush Yadav
• [PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support   Fabio Estevam
• [PATCH 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Alexandru Gagniuc
• [PATCH 2/5] spl: Introduce spl_board_prepare_for_optee() hook   Alexandru Gagniuc
• [PATCH 3/5] arm: stm32mp: Implement support for TZC 400 controller   Alexandru Gagniuc
• [PATCH 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE   Alexandru Gagniuc
• [PATCH 5/5] ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb   Alexandru Gagniuc
• [PATCH 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Alex G.
• [PATCH 0/4] mkimage: Add a 'keyfile' argument for image signing   Alexandru Gagniuc
• [PATCH 1/4] doc: signature.txt: Document the keydir and keyfile arguments   Alexandru Gagniuc
• [PATCH 2/4] mkimage: Add a 'keyfile' argument for image signing   Alexandru Gagniuc
• [PATCH 3/4] lib/rsa: Use the 'keyfile' argument from mkimage   Alexandru Gagniuc
• [PATCH 4/4] lib/ecdsa: Use the 'keydir' argument from mkimage if appropriate   Alexandru Gagniuc
• Pull request for UEFI sub-system for efi-2021-04-rc2   Heinrich Schuchardt
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Sean Anderson
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Tom Rini
• [PATCH 1/4] Respect that some compression algos can be enabled separately for SPL   Stefano Babic
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Sean Anderson
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Heinrich Schuchardt
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Sean Anderson
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Tom Rini
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Tom Rini
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Heinrich Schuchardt
• [PATCH v2] ARM: mx6: Add function to set serial#   Sean Anderson
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Heinrich Schuchardt
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Sean Anderson
• [PATCH] ARM: mx6: Add function to read UNIQUE_ID   Tom Rini
• Please pull u-boot-x86   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH v2] ARM: mx6: Add function to set serial#   Tom Rini
• U-Boot ECDSA Implementation Question   Tim Romanski
• [PATCH v2] ARM: mx6: Add function to set serial#   Heinrich Schuchardt
• [PATCH] board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants   Jaehoon Chung
• [PATCH v2] ARM: mx6: Add function to set serial#   Sean Anderson
• [PATCH 2/3] mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq   Jaehoon Chung
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Jaehoon Chung
• [PATCH v2] ARM: mx6: Add function to set serial#   Tom Rini
• [PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• [PATCH v2] ARM: mx6: Add function to set serial#   Heinrich Schuchardt
• [PATCH v2] ARM: mx6: Add function to set serial#   Tom Rini
• [BUG]u-boot no boots from SD-card on NXP T2080RDB development board   Jeff Hering
• [PATCH v2] fastboot: add UUU command UCmd and ACmd support   Lukasz Majewski
• [PATCH v2 27/28] fs/squashfs: sqfs_read: fragmented files are not supported   João Marcos Costa
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• [PATCH v2 0/6] log: Allow multiple lines and conversion to printf()   Simon Glass
• [PATCH v2 6/6] log: Convert log values to printf() if not enabled   Sean Anderson
• [PATCH 1/4] Respect that some compression algos can be enabled separately for SPL   Tim Harvey
• [PATCH] gpio-uclass: fix gpio flags save condition   Simon Glass
• [PATCH v3 12/12] smbios: Allow a few values to come from sysinfo   Simon Glass
• [PATCH v1] test: Include /sbin to the PATH when creating ext4 disk image   Simon Glass
• [PATCH v1] test: Allow simple glob pattern in the test name   Simon Glass
• [PATCH v2 6/6] log: Convert log values to printf() if not enabled   Simon Glass
• [PATCH v2 00/14] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Sean Anderson
• [PATCH v2 01/14] cmd: sf: Display errno on erase failure   Sean Anderson
• [PATCH v2 02/14] cmd: sf: Print error on test failure   Sean Anderson
• [PATCH v2 03/14] mtd: spi-nor-core: Fix typo in documentation   Sean Anderson
• [PATCH v2 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Sean Anderson
• [PATCH v2 05/14] spi: spi-mem: Add debug message for spi-mem ops   Sean Anderson
• [PATCH v2 06/14] spi: dw: Log status register on timeout   Sean Anderson
• [PATCH v2 07/14] spi: dw: Actually mask interrupts   Sean Anderson
• [PATCH v2 08/14] spi: dw: Switch to capabilities   Sean Anderson
• [PATCH v2 09/14] spi: dw: Rewrite poll_transfer logic   Sean Anderson
• [PATCH v2 10/14] spi: dw: Add ENHANCED cap   Sean Anderson
• [PATCH v2 11/14] spi: dw: Define registers for enhanced mode   Sean Anderson
• [PATCH v2 12/14] spi: dw: Support enhanced SPI   Sean Anderson
• [PATCH v2 13/14] spi: dw: Support clock stretching   Sean Anderson
• [PATCH v2 14/14] riscv: k210: Enable QSPI for spi3   Sean Anderson
• [PATCH v4 00/12] smbios: Enhancements for more flexibility   Simon Glass
• [PATCH v4 01/12] README: Add doumentation for version information   Simon Glass
• [PATCH v4 02/12] Makefile: Provide numeric versions   Simon Glass
• [PATCH v4 03/12] smbios: Move smbios_write_type to the C file   Simon Glass
• [PATCH v4 04/12] smbios: Use char consistently for the eos member   Simon Glass
• [PATCH v4 05/12] smbios: Set BIOS release version   Simon Glass
• [PATCH v4 06/12] smbios: Use a struct to keep track of context   Simon Glass
• [PATCH v4 07/12] smbios: Drop the eos parameter   Simon Glass
• [PATCH v4 08/12] smbios: Track the end of the string table   Simon Glass
• [PATCH v4 09/12] smbios: Add more options for the BIOS version string   Simon Glass
• [PATCH v4 10/12] sysinfo: Move #ifdef so that operations are always defined   Simon Glass
• [PATCH v4 11/12] x86: coral: Add sysinfo ops   Simon Glass
• [PATCH v4 12/12] smbios: Allow a few values to come from sysinfo   Simon Glass
• [PATCH v3 0/2] x86: Minor improvements mostly for image loading   Simon Glass
• [PATCH v3 1/2] sysinfo: Allow showing model info from sysinfo   Simon Glass
• [PATCH v3 2/2] x86: coral: Show memory config and SKU ID on startup   Simon Glass
• [PATCH v4 12/12] smbios: Allow a few values to come from sysinfo   Simon Glass
• [PATCH v4 00/16] gpio: Update and simplify the uclass API   Simon Glass
• [PATCH v4 01/16] gpio: Disable functions not used with of-platdata   Simon Glass
• [PATCH v4 02/16] dm: gpio: Rename set_dir_flags() method to update_flags()   Simon Glass
• [PATCH v4 03/16] dm: gpio: Rename get_dir_flags() method to get_flags()   Simon Glass
• [PATCH v4 04/16] gpio: Rename dm_gpio_get_dir_flags() to dm_gpio_get_flags()   Simon Glass
• [PATCH v4 05/16] gpio: Drop dm_gpio_set_dir()   Simon Glass
• [PATCH v4 06/16] gpio: sandbox: Rename GPIO dir_flags to flags   Simon Glass
• [PATCH v4 07/16] gpio: sandbox: Use a separate flag for the value   Simon Glass
• [PATCH v4 08/16] gpio: sandbox: Fully separate pin value from output value   Simon Glass
• [PATCH v4 09/16] gpio: sandbox: Make sandbox_gpio_set_flags() set all flags   Simon Glass
• [PATCH v4 10/16] dm: gpio: Add a way to update flags   Simon Glass
• [PATCH v4 11/16] gpio: Replace direction_input() and direction_output()   Simon Glass
• [PATCH v4 12/16] gpio: Use an 'ops' variable everywhere   Simon Glass
• [PATCH v4 13/16] gpio: x86: Drop the deprecated methods in intel_gpio   Simon Glass
• [PATCH v4 14/16] gpio: sandbox: Track whether a GPIO is driven   Simon Glass
• [PATCH v4 15/16] gpio: Define the log category in the uclass   Simon Glass
• [PATCH v4 16/16] gpio: Add a way to read 3-way strapping pins   Simon Glass
• [RFC PATCH 00/13] spi: dw: Add support for XIP mode   Sean Anderson
• [RFC PATCH 01/13] linux err: Synchronize with Linux 5.10   Sean Anderson
• [RFC PATCH 02/13] spi-mem: Add dirmap API from Linux   Sean Anderson
• [RFC PATCH 03/13] mtd: spi-nor: use spi-mem dirmap API   Sean Anderson
• [RFC PATCH 04/13] core: ofnode: Fix inconsistent returns of *_read_u32_array   Sean Anderson
• [RFC PATCH 05/13] mux: Inline mux functions when CONFIG_MUX is disabled   Sean Anderson
• [RFC PATCH 06/13] mux: Define a stub for mux_get_by_index if CONFIG_MUX is disabled   Sean Anderson
• [RFC PATCH 07/13] mux: mmio: Only complain about idle-states if it is malformed   Sean Anderson
• [RFC PATCH 08/13] spi: dw: Define XIP registers   Sean Anderson
• [RFC PATCH 09/13] spi: dw: Add XIP and XIP_CONCURRENT caps   Sean Anderson
• [RFC PATCH 10/13] spi: dw: Use a mux to access registers   Sean Anderson
• [RFC PATCH 11/13] spi: dw: Add support for DIRMAP   Sean Anderson
• [RFC PATCH 12/13] riscv: k210: Increase SPI3 bus clock to CPU speed   Sean Anderson
• [RFC PATCH 13/13] riscv: k210: Add bindings for SPI XIP   Sean Anderson
• [RFC PATCH 00/13] spi: dw: Add support for XIP mode   Sean Anderson
• [PATCH v3] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [PATCH v2] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [GIT PULL] TI changes for v2021.04 rc2   Lokesh Vutla
• [PATCH 4/5] board/km: move km i2c deblock declarations to a km/common.h   Aleksandar Gerasimovski
• [PATCH v4 5/5] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• [BUG]u-boot no boots from SD-card on NXP T2080RDB development board   Jaehoon Chung
• [PATCH 1/2] ARM: imx6: mx6sabre-common: Replace fatload with FS_GENERIC load   Peng Fan (OSS)
• [PATCH 2/2] ARM: imx6: mx6sabre-common: Search for boot components in /boot too   Peng Fan (OSS)
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   Bough Chen
• [RFC PATCH 05/13] mux: Inline mux functions when CONFIG_MUX is disabled   Pratyush Yadav
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   Jaehoon Chung
• [PATCH] armv7: ls102xa: Enable I-Cache to speed up the boot time   Zhiqiang Hou
• [PATCH] mpc8xxx: fsl_pamu: Update data type in config_pamu   Priyanka Jain
• [PATCH] configs: T1042: Drop the CONFIG_VIDEO   Zhiqiang Hou
• [PATCH v4] arm: fsl: common: Improve NXP VID driver PMBus support   Priyanka Jain
• [v4 01/33] gpio: mpc8xxx_gpio: Fix for litte endian   Priyanka Jain
• [HELP] binman: main.py: not found   Buhrow, Simon
• [PATCH v4] arm: fsl: common: Improve NXP VID driver PMBus support   Wasim Khan (OSS)
• [PATCH] board/km: fix setting of pram variable   Holger Brunck
• [PATCH v4] arm: fsl: common: Improve NXP VID driver PMBus support   Wasim Khan (OSS)
• [PATCH v5 5/5] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• [PATCH] board/km: fix setting of pram variable   Stefan Roese
• [PATCH] board/km: fix setting of pram variable   Holger Brunck
• [v3 0/6] Add Vendor Authorized Boot (VAB) support   Siew Chin Lim
• [v3 1/6] arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64   Siew Chin Lim
• [v3 2/6] arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)   Siew Chin Lim
• [v3 3/6] arm: socfpga: cmd: Support 'vab' command   Siew Chin Lim
• [v3 4/6] arm: socfpga: dts: soc64: Update filename in binman node of FIT image with VAB support   Siew Chin Lim
• [v3 5/6] configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfig   Siew Chin Lim
• [v3 6/6] configs: socfpga: Add defconfig for Agilex with VAB support   Siew Chin Lim
• [RFC PATCH 06/13] mux: Define a stub for mux_get_by_index if CONFIG_MUX is disabled   Pratyush Yadav
• [PATCH v2 00/12] Add support for pinmux status command on beaglebone   Dario Binacchi
• [v5 00/33] gpio: layerscape: fix gpio and enable gpio   Biwen Li
• [v5 01/33] gpio: mpc8xxx_gpio: Fix for litte endian   Biwen Li
• [v5 02/33] arm: dts: ls1021a: add gpio node   Biwen Li
• [v5 03/33] arm64: dts: ls1012a: add gpio node   Biwen Li
• [v5 04/33] arm64: dts: ls1028a: add gpio node   Biwen Li
• [v5 05/33] arm64: dts: ls1043a: add gpio node   Biwen Li
• [v5 06/33] arm64: dts: ls1046a: add gpio node   Biwen Li
• [v5 07/33] arm64: dts: ls1088a: add gpio node   Biwen Li
• [v5 08/33] arm64: dts: ls208xa: add gpio node   Biwen Li
• [v5 09/33] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 10/33] configs: ls1043a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 11/33] configs: ls1028a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 12/33] configs: ls1088a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 13/33] configs: ls208xa: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 14/33] configs: lx2160a: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 15/33] configs: ls1046a: enable MPC8XXX_GPIO   Biwen Li
• [v5 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 17/33] configs: ls1021aqds: enable CONFIG_MPC8XXX_GPIO   Biwen Li
• [v5 18/33] configs: ls1012afrwy: enable CMD_GPIO   Biwen Li
• [v5 19/33] configs: ls1012ardb: enable CMD_GPIO   Biwen Li
• [v5 20/33] configs: ls1021aqds: enable CMD_GPIO   Biwen Li
• [v5 21/33] configs: ls1021atwr: enable CMD_GPIO   Biwen Li
• [v5 22/33] configs: ls1028aqds: enable CMD_GPIO   Biwen Li
• [v5 23/33] configs: ls1028ardb: enable CMD_GPIO   Biwen Li
• [v5 24/33] configs: ls1043aqds: enable CMD_GPIO   Biwen Li
• [v5 25/33] configs: ls1043ardb: enable CMD_GPIO   Biwen Li
• [v5 26/33] configs: ls1046ardb: enable CMD_GPIO   Biwen Li
• [v5 27/33] configs: ls1046aqds: enable CMD_GPIO   Biwen Li
• [v5 28/33] configs: ls2088ardb: enable DM_GPIO and CMD_GPIO   Biwen Li
• [v5 29/33] configs: ls2088aqds: enable CMD_GPIO   Biwen Li
• [v5 30/33] configs: ls1088aqds: enable DM_GPIO and CMD_GPIO   Biwen Li
• [v5 31/33] configs: ls1088ardb: enable DM_GPIO and CMD_GPIO   Biwen Li
• [v5 32/33] configs: lx2160ardb: enable CMD_GPIO   Biwen Li
• [v5 33/33] configs: lx2160aqds: enable CMD_GPIO   Biwen Li
• [RFC PATCH 07/13] mux: mmio: Only complain about idle-states if it is malformed   Pratyush Yadav
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   ZHIZHIKIN Andrey
• [PATCH 0/8]   Patrick Delaunay
• [PATCH 1/8] stm32mp: update MMU config before the relocation   Patrick Delaunay
• [PATCH 2/8] stm32mp: update the mmu configuration for SPL and prereloc   Patrick Delaunay
• [PATCH 3/8] arm: remove TTB_SECT_XN_MASK in DCACHE_WRITETHROUGH   Patrick Delaunay
• [PATCH 4/8] arm: cosmetic: align TTB_SECT define value   Patrick Delaunay
• [PATCH 5/8] arm: cp15: update DACR value to activate access control   Patrick Delaunay
• [PATCH 6/8] arm: omap2: remove arm_init_domains   Patrick Delaunay
• [PATCH 7/8] arm: cp15: remove weak function arm_init_domains   Patrick Delaunay
• [PATCH 8/8] arm: remove set_dacr/get_dacr functions   Patrick Delaunay
• [RFC PATCH 07/13] mux: mmio: Only complain about idle-states if it is malformed   Sean Anderson
• Pull request for UEFI sub-system for efi-2021-04-rc2   Tom Rini
• [PATCH v2 00/12] Add support for pinmux status command on beaglebone   Lokesh Vutla
• [PATCH 0/4] arm: mvebu: turris_mox: Fix and enable PCIe devices   Pali Rohár
• [PATCH 1/4] arm: a37xx: pci: Set Max Payload Size and Max Read Request Size to 512 bytes   Pali Rohár
• [PATCH 2/4] arm: mvebu: turris_mox: Enable CONFIG_PCI_PNP   Pali Rohár
• [PATCH 3/4] arm: mvebu: turris_mox: Enable CONFIG_USB_XHCI_PCI   Pali Rohár
• [PATCH 4/4] arm: mvebu: turris_mox: Enable NVMe support   Pali Rohár
• U-Boot ECDSA Implementation Question   Simon Glass
• [PATCH v5 00/10] fastboot: Add better support for specifying partitions   Sean Anderson
• [PATCH v5 01/10] mmc: sandbox: Add support for writing   Sean Anderson
• [PATCH v5 02/10] test: dm: Add test for fastboot mmc partition naming   Sean Anderson
• [PATCH v5 03/10] part: Give several functions more useful return values   Sean Anderson
• [PATCH v5 04/10] part: Support getting whole disk from part_get_info_by_dev_and_name_or_num   Sean Anderson
• [PATCH v5 05/10] part: Support string block devices in part_get_info_by_dev_and_name   Sean Anderson
• [PATCH v5 06/10] fastboot: Remove mmcpart argument from raw_part_get_info_by_name   Sean Anderson
• [PATCH v5 07/10] fastboot: Move part_get_info_by_name_or_alias after raw_part_get_info_by_name   Sean Anderson
• [PATCH v5 08/10] fastboot: Allow u-boot-style partitions   Sean Anderson
• [PATCH v5 09/10] doc: Rename k210 partitions anchor   Sean Anderson
• [PATCH v5 10/10] doc: Document partition specifications   Sean Anderson
• [PATCH v2 4/4] doc: update Kernel documentation build system   Simon Glass
• [PATCH v4 8/9] fastboot: Allow u-boot-style partitions   Lukasz Majewski
• [PATCH] gpio-uclass: fix gpio flags save condition   Köry Maincent
• [PATCH v4 8/9] fastboot: Allow u-boot-style partitions   Sean Anderson
• [RFC PATCH v1 0/2] Allow disabling driver model for I2C in SPL   Igor Opaniuk
• [RFC PATCH v1 1/2] dm: i2c: allow disabling driver model in SPL   Igor Opaniuk
• [RFC PATCH v1 2/2] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C and DM_I2C_GPIO   Igor Opaniuk
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Maxime Ripard
• U-Boot ECDSA Implementation Question   Alex G.
• [PATCH] rockchip: rk3399: Add Nanopi M4V2 board support   Christopher Obbard
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Jernej Škrabec
• [PATCH] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   Tim Harvey
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Andy Shevchenko
• [PATCH 4/5] board/km: move km i2c deblock declarations to a km/common.h   Tom Rini
• [PATCH v4 5/5] board/km: add support for seli8 design based on nxp ls102x   Tom Rini
• [GIT PULL] TI changes for v2021.04 rc2   Tom Rini
• [PATCH v1] test: Include /sbin to the PATH when creating ext4 disk image   Andy Shevchenko
• 0a2aaab0b678fd1778ff2fc59d0770fc82995532 breaks Pinebook Pro.   Jesper Schmitz Mouridsen
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• qemu-arm: hang during MMU initialization   Igor Opaniuk
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Tom Rini
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Tom Rini
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH v2 00/12] Add support for pinmux status command on beaglebone   Tom Rini
• [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y   Christoph Niedermaier
• [RESEND PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [RESEND PATCH 01/16] serial: usbtty: Fix puts function   Pali Rohár
• [RESEND PATCH 02/16] serial: usbtty: Send urb data in correct order   Pali Rohár
• [RESEND PATCH 03/16] usb: musb: Fix compilation of gadget code   Pali Rohár
• [RESEND PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep   Pali Rohár
• [RESEND PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints   Pali Rohár
• [RESEND PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable   Pali Rohár
• [RESEND PATCH 07/16] usb: musb: Fix transmission of bigger buffers   Pali Rohár
• [RESEND PATCH 08/16] usb: musb: Fix receiving of bigger buffers   Pali Rohár
• [RESEND PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand   Pali Rohár
• [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint   Pali Rohár
• [RESEND PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf()   Pali Rohár
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Pali Rohár
• [RESEND PATCH 13/16] arm: omap3: Compile s_init() function only when it is used   Pali Rohár
• [RESEND PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs()   Pali Rohár
• [RESEND PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c   Pali Rohár
• [RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default   Pali Rohár
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Andy Shevchenko
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• [PATCH v1] test: Include /sbin to the PATH when creating ext4 disk image   Andy Shevchenko
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH v2 2/2] console: Don't start/stop console if stdio device invalid   Tom Rini
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Luka Kovacic
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Tom Rini
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Luka Kovacic
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Tom Rini
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Luka Kovacic
• [PATCH v2 4/4] doc: update Kernel documentation build system   Bin Meng
• [PATCH v1] test: Include /sbin to the PATH when creating ext4 disk image   Simon Glass
• [PATCH v2 4/4] doc: update Kernel documentation build system   Bin Meng
• [PATCH v2 0/4] Add Gateworks Venice board support   Tim Harvey
• [PATCH v2 1/4] thermal: imx_tmu: enable monitoring and default alert/critical   Tim Harvey
• [PATCH v2 2/4] Respect that some compression algos can be enabled separately for SPL   Tim Harvey
• [PATCH v2 3/4] arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits   Tim Harvey
• [PATCH v2 4/4] board: gateworks: imx8mm: Add Gateworks Venice board support   Tim Harvey
• [PATCH] gpio-uclass: fix gpio flags save condition   Simon Glass
• [RESEND PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints   Pavel Machek
• [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint   Pavel Machek
• [RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default   Pavel Machek
• u-boot idbloader.img fails to initialise LPDDR3 on nanopi m4 v1   Christopher Obbard
• [PATCH v4 00/12] smbios: Enhancements for more flexibility   Bin Meng
• [PATCH v3 0/2] x86: Minor improvements mostly for image loading   Bin Meng
• Please pull u-boot-x86   Bin Meng
• [PATCH v3] mmc: mmc_spi: Print verbose debug output when crc16 check fails   Bin Meng
• [PATCH v2 0/3] mmc: mmc_spi: Fix potential spec violation in receiving card response   Bin Meng
• [RESEND PATCH 01/16] serial: usbtty: Fix puts function   Lukasz Majewski
• [RESEND PATCH 02/16] serial: usbtty: Send urb data in correct order   Lukasz Majewski
• [RESEND PATCH 03/16] usb: musb: Fix compilation of gadget code   Lukasz Majewski
• [RESEND PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep   Lukasz Majewski
• [RESEND PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints   Lukasz Majewski
• [RESEND PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable   Lukasz Majewski
• [RESEND PATCH 07/16] usb: musb: Fix transmission of bigger buffers   Lukasz Majewski
• [RESEND PATCH 08/16] usb: musb: Fix receiving of bigger buffers   Lukasz Majewski
• [RESEND PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand   Lukasz Majewski
• [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint   Lukasz Majewski
• [RESEND PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf()   Lukasz Majewski
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Lukasz Majewski
• [RESEND PATCH 13/16] arm: omap3: Compile s_init() function only when it is used   Lukasz Majewski
• [RESEND PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs()   Lukasz Majewski
• [RESEND PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c   Lukasz Majewski
• [RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default   Lukasz Majewski
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Marek Vasut
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Pali Rohár
• [PATCH v3 0/2] x86: Minor improvements mostly for image loading   Simon Glass
• [PATCH v2 2/3] fs: fat: must not write directory '.' and '..'   Simon Glass
• [PATCH v2 3/3] fs: fat: remove trailing periods from long name   Simon Glass
• [PATCH v4 0/2] x86: Minor improvements mostly for image loading   Simon Glass
• [PATCH v4 1/2] sysinfo: Allow showing model info from sysinfo   Simon Glass
• [PATCH v4 2/2] x86: coral: Show memory config and SKU ID on startup   Simon Glass
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Simon Glass
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Marek Vasut
• [PATCH v4 0/9] Various minor fixes   Simon Glass
• [PATCH v4 1/9] spl: Drop duplicate 'Jumping to U-Boot' message   Simon Glass
• [PATCH v4 2/9] binman: Indicate how to make binman verbose   Simon Glass
• [PATCH v4 3/9] doc: describe the md command   Simon Glass
• [PATCH v4 4/9] doc: Add a note about producing 'md.b' output using hexdump   Simon Glass
• [PATCH v4 5/9] s5p4418_nanopi2: Drop dead code   Simon Glass
• [PATCH v4 6/9] sandbox: Add os_realloc()   Simon Glass
• [PATCH v4 7/9] sandbox: Avoid using malloc() for system state   Simon Glass
• [PATCH v4 8/9] sandbox: Write out bloblist when exiting   Simon Glass
• [PATCH v4 9/9] bootm: Fix duplicate debugging in bootm_process_cmdline()   Simon Glass
• [PATCH v4 8/9] fastboot: Allow u-boot-style partitions   Lukasz Majewski
• [PATCH v4 00/11] tpm: Support using TPM1 and TPM2 from a single API   Simon Glass
• [PATCH v4 01/11] tpm: Don't include cr50 in TPL/SPL   Simon Glass
• [PATCH v4 02/11] tpm: Use logging in the uclass   Simon Glass
• [PATCH v4 03/11] tpm: Add debugging of request in tpm_sendrecv_command()   Simon Glass
• [PATCH v4 04/11] tpm: Add an API that can support v1.2 and v2   Simon Glass
• [PATCH v4 05/11] tpm: Switch TPMv1 over to use the new API   Simon Glass
• [PATCH v4 06/11] tpm: Add a basic API implementation for TPMv2   Simon Glass
• [PATCH v4 07/11] tpm: Reduce duplication in a few functions   Simon Glass
• [PATCH v4 08/11] tpm: Add an implementation of define_space   Simon Glass
• [PATCH v4 09/11] tpm: Add TPM2 support for read/write values   Simon Glass
• [PATCH v4 10/11] tpm: Add TPM2 support for write_lock   Simon Glass
• [PATCH v4 11/11] tpm: Allow disabling platform hierarchy with TPM2   Simon Glass
• [PATCH 1/3] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz
• [PATCH] drivers: tee: sandbox: secure channel protocol control   Jorge Ramirez-Ortiz
• [PATCH 2/3] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCH 3/3] drivers: tee: sandbox: secure channel protocol control   Jorge Ramirez-Ortiz
• [PATCHv2 1/3] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz
• [PATCHv2 2/3] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCHv2 3/3] drivers: tee: sandbox: secure channel protocol control   Jorge Ramirez-Ortiz
• [PATCH v4 8/9] fastboot: Allow u-boot-style partitions   Sean Anderson
• [PATCH 2/2] dm: core: Add DM_DEVICE_REMOVE condition to all exit paths   Simon Glass
• [PATCH 1/2] dm: core: Fix allocation of empty of-platdata   Simon Glass
• [PATCH] serial: ns16550: Handle zero <clock-frequency> value   Simon Glass
• [PATCH] serial: ns16550: Correct the base address type   Simon Glass
• [PATCH 2/2] dts: Fix OF_LIVE dependency   Simon Glass
• [PATCH 1/2] lib: Fix BINMAN_FDT dependency   Simon Glass
• [PATCH v2 33/33] dtoc: Generate device instances   Simon Glass
• [PATCH v2 32/33] dtoc: Generate uclass devices   Simon Glass
• [PATCH v2 31/33] dtoc: Generate a summary in the dt-plat.c file   Simon Glass
• [PATCH v2 30/33] dtoc: Tidy up the list of supported phandle properties   Simon Glass
• [PATCH v2 29/33] sandbox: i2c: Rename driver names to work with of-platdata   Simon Glass
• [PATCH v2 28/33] sandbox: Make sandbox,emul more conventional   Simon Glass
• [PATCH v2 27/33] dtoc: Don't generate platform data with instantiation   Simon Glass
• [PATCH v2 26/33] dtoc: Add support for decl file   Simon Glass
• [PATCH v2 25/33] dm: of-platadata: Add option for device instantiation   Simon Glass
• [PATCH v2 24/33] dtoc: Add an option for device instantiation   Simon Glass
• [PATCH v2 23/33] dtoc: Support processing the root node   Simon Glass
• [PATCH v2 22/33] dtoc: Set up the uclasses that are used   Simon Glass
• [PATCH v2 21/33] dtoc: Assign a sequence number to each node   Simon Glass
• [PATCH v2 20/33] dtoc: Detect drivers only at the start of start of line   Simon Glass
• [PATCH v2 19/33] dtoc: Read aliases for uclasses   Simon Glass
• [PATCH v2 18/33] dtoc: Warn of duplicate drivers   Simon Glass
• [PATCH v2 17/33] dtoc: Process driver aliases along with drivers   Simon Glass
• [PATCH v2 16/33] dtoc: Support headers needed for drivers   Simon Glass
• [PATCH v2 15/33] Makefile: Pass the U-Boot phase to dtoc   Simon Glass
• [PATCH v2 14/33] dtoc: Support tracking the phase of U-Boot   Simon Glass
• [PATCH v2 13/33] dtoc: Track nodes which are actually used   Simon Glass
• [PATCH v2 12/33] dtoc: Process nodes to set up required properties   Simon Glass
• [PATCH v2 11/33] dtoc: Make use of node properties   Simon Glass
• [PATCH v2 10/33] dtoc: Add some extra properties to nodes   Simon Glass
• [PATCH v2 09/33] dtoc: Rename sandbox_i2c_test and sandbox_pmic_test   Simon Glass
• [PATCH v2 08/33] dtoc: Move test files into a test/ directory   Simon Glass
• [PATCH v2 07/33] dtoc: Support scanning of structs in header files   Simon Glass
• [PATCH v2 06/33] dtoc: Support scanning of uclasses   Simon Glass
• [PATCH v2 05/33] dtoc: Collect priv/plat struct info from drivers   Simon Glass
• [PATCH v2 04/33] dtoc: Ignore unwanted files when scanning for drivers   Simon Glass
• [PATCH v2 03/33] dtoc: Save scan information across test runs   Simon Glass
• [PATCH v2 02/33] dtoc: Scan drivers for available information   Simon Glass
• [PATCH v2 01/33] bootstage: Fix dependency for BOOTSTAGE_RECORD_COUNT   Simon Glass
• [PATCH v2 1/1] sandbox: host bind must close file descriptor   Simon Glass
• [PATCH v1] fix patman --limit-cc option   Simon Glass
• [PATCH v4 06/41] doc: Document how sandbox_spl_tests are run   Simon Glass
• [PATCH v4 08/11] tpm: Add an implementation of define_space   Ilias Apalodimas
• [PATCH v4 05/11] tpm: Switch TPMv1 over to use the new API   Ilias Apalodimas
• [PATCH v3] mmc: mmc_spi: Print verbose debug output when crc16 check fails   Peng Fan
• Help regarding booting FIT image on RPi4   Ritwik Mandal
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [RESEND v2 PATCH 01/16] serial: usbtty: Fix puts function   Pali Rohár
• [RESEND v2 PATCH 02/16] serial: usbtty: Send urb data in correct order   Pali Rohár
• [RESEND v2 PATCH 03/16] usb: musb: Fix compilation of gadget code   Pali Rohár
• [RESEND v2 PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep   Pali Rohár
• [RESEND v2 PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints   Pali Rohár
• [RESEND v2 PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable   Pali Rohár
• [RESEND v2 PATCH 07/16] usb: musb: Fix transmission of bigger buffers   Pali Rohár
• [RESEND v2 PATCH 08/16] usb: musb: Fix receiving of bigger buffers   Pali Rohár
• [RESEND v2 PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand   Pali Rohár
• [RESEND v2 PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint   Pali Rohár
• [RESEND v2 PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf()   Pali Rohár
• [RESEND v2 PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Pali Rohár
• [RESEND v2 PATCH 13/16] arm: omap3: Compile s_init() function only when it is used   Pali Rohár
• [RESEND v2 PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs()   Pali Rohár
• [RESEND v2 PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c   Pali Rohár
• [RESEND v2 PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default   Pali Rohár
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Pali Rohár
• [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used   Marek Vasut
• [PATCH v3 05/11] tpm: Switch TPMv1 over to use the new API   Simon Glass
• [PATCH 3/5] arm: stm32mp: Implement support for TZC 400 controller   Simon Glass
• [PATCH v2 02/37] linker_lists: Allow use in data structures   Simon Glass
• [PATCH 2/5] spl: Introduce spl_board_prepare_for_optee() hook   Simon Glass
• [PATCH 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Simon Glass
• [PATCH 2/4] mkimage: Add a 'keyfile' argument for image signing   Simon Glass
• [PATCH 1/4] doc: signature.txt: Document the keydir and keyfile arguments   Simon Glass
• [PATCH 3/4] lib/rsa: Use the 'keyfile' argument from mkimage   Simon Glass
• [PATCH 4/4] lib/ecdsa: Use the 'keydir' argument from mkimage if appropriate   Simon Glass
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Simon Glass
• [RFC PATCH 01/13] linux err: Synchronize with Linux 5.10   Simon Glass
• [RFC PATCH 04/13] core: ofnode: Fix inconsistent returns of *_read_u32_array   Simon Glass
• [PATCH v5 09/10] doc: Rename k210 partitions anchor   Simon Glass
• [PATCH v5 10/10] doc: Document partition specifications   Simon Glass
• [RFC PATCH v1 1/2] dm: i2c: allow disabling driver model in SPL   Simon Glass
• [RFC PATCH v1 2/2] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C and DM_I2C_GPIO   Simon Glass
• [PATCH 3/3] drivers: tee: sandbox: secure channel protocol control   Simon Glass
• [PATCH v1] test: Allow simple glob pattern in the test name   Simon Glass
• [PATCHv2 1/3] common: SCP03 control (enable and provision of keys)   Simon Glass
• [PATCH 2/3] cmd: SCP03: enable and provision command   Simon Glass
• [PATCHv2 2/3] cmd: SCP03: enable and provision command   Simon Glass
• [PATCHv2 3/3] drivers: tee: sandbox: secure channel protocol control   Simon Glass
• [PATCH 00/26] ppc: qemu: Convert qemu-ppce500 to driver model   Bin Meng
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Bin Meng
• [PATCH 02/26] ppc: qemu: Update MAINTAINERS for correct email address   Bin Meng
• [PATCH 03/26] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Bin Meng
• [PATCH 04/26] ppc: qemu: Support non-identity PCI bus address   Bin Meng
• [PATCH 05/26] ppc: qemu: Fix CONFIG_SYS_PCI_MAP_END   Bin Meng
• [PATCH 06/26] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Bin Meng
• [PATCH 07/26] ppc: qemu: Drop init_laws() and print_laws()   Bin Meng
• [PATCH 08/26] ppc: qemu: Drop board_early_init_f()   Bin Meng
• [PATCH 09/26] ppc: qemu: Enable OF_CONTROL   Bin Meng
• [PATCH 10/26] ppc: qemu: Enable driver model   Bin Meng
• [PATCH 11/26] include: Remove extern from addr_map.h   Bin Meng
• [PATCH 12/26] lib: addr_map: Move address_map[] type to the header file   Bin Meng
• [PATCH 13/26] cmd: Add a command to display the address map   Bin Meng
• [PATCH 14/26] lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help   Bin Meng
• [PATCH 15/26] ppc: io.h: Use addrmap_ translation APIs only in post-relocation phase   Bin Meng
• [PATCH 16/26] common: Move initr_addr_map() to a bit earlier   Bin Meng
• [PATCH 17/26] ppc: qemu: Switch over to use DM serial   Bin Meng
• [PATCH 18/26] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Bin Meng
• [PATCH 19/26] pci: mpc85xx: Support controller register physical address beyond 32-bit   Bin Meng
• [PATCH 20/26] pci: mpc85xx: Support 64-bit bus and cpu address   Bin Meng
• [PATCH 21/26] ppc: qemu: Switch over to use DM ETH and PCI   Bin Meng
• [PATCH 22/26] ppc: qemu: Drop CONFIG_OF_BOARD_SETUP   Bin Meng
• [PATCH 23/26] cmd: Fix virtio command dependency   Bin Meng
• [PATCH 24/26] ppc: qemu: Enable VirtIO NET support   Bin Meng
• [PATCH 25/26] ppc: qemu: Move board directory from board/freescale to board/emulation   Bin Meng
• [PATCH 26/26] doc: Add a reST document for qemu-ppce500   Bin Meng
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Simon Glass
• Help for boot an iMX7 with u-boot-imx from scratch   Juan Manuel Alvarez
• [PATCHv2 1/3] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz, Foundries
• [PATCHv2 1/3] common: SCP03 control (enable and provision of keys)   Simon Glass
• arm64: rk3399: Add support NanoPi R4s   alex tian
• [PATCH] rockchip: rk3399: Add Nanopi M4V2 board support   Christopher Obbard
• u-boot idbloader.img fails to initialise LPDDR3 on nanopi m4 v1   Christopher Obbard
• [PATCH 2/3] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz, Foundries
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [PATCHv3 0/4] SCP03 control   Jorge Ramirez-Ortiz
• [PATCHv3 1/4] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz
• [PATCHv3 2/4] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCHv3 3/4] drivers: tee: sandbox: SCP03 control emulator   Jorge Ramirez-Ortiz
• [PATCHv3 4/4] doc: describe the scp03 command   Jorge Ramirez-Ortiz
• How to have a menu in u-boot ? (newbie)   Thomas Carrié
• [PATCH] nvme: Fix cache alignment   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH 0/7] Fix compiler warnings for 32-bit ARM   Simon Glass
• [PATCH 1/7] mkeficapsule: Correct printf() strings   Simon Glass
• [PATCH 2/7] efi: Fix compiler warnings   Simon Glass
• [PATCH 3/7] pci: swap_case: Allow compilation on 32-bit machines   Simon Glass
• [PATCH 4/7] tpm: Correct warning on 32-bit build   Simon Glass
• [PATCH 5/7] test: acpi: Fix warnings on 32-bit build   Simon Glass
• [PATCH 6/7] doc: sandbox: Fix up dependencies   Simon Glass
• [PATCH 7/7] doc: sandbox: Update instructions on quitting   Simon Glass
• [PATCH 6/7] doc: sandbox: Fix up dependencies   Heinrich Schuchardt
• [PATCH 4/7] tpm: Correct warning on 32-bit build   Heinrich Schuchardt
• [PATCH 3/7] pci: swap_case: Allow compilation on 32-bit machines   Heinrich Schuchardt
• [PATCH 2/7] efi: Fix compiler warnings   Heinrich Schuchardt
• [PATCH 1/7] mkeficapsule: Correct printf() strings   Heinrich Schuchardt
• [PATCH 0/3] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse Taube
• [PATCH 1/4] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse Taube
• [PATCH 2/4] dt-bindings: clock: imxrt1050: add PIT GPT clock   Jesse Taube
• [PATCH 3/4] imxrt1050 dtsi gpt1 node   Jesse Taube
• [PATCH 4/4] timer: imx-gpt: Add basic timer support for i.MX SoCs family   Jesse Taube
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• arm64: rk3399: Add support nanopi r4s   alex tian
• [PATCH 1/4] timer: imx-gpt: Add timer support for i.MX SoCs family   Sean Anderson
• [PATCH 4/4] timer: imx-gpt: Add basic timer support for i.MX SoCs family   Sean Anderson
• How to have a menu in u-boot ? (newbie)   Sean Anderson
• [PATCH 0/4] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse Taube
• [PATCH 0/3] test: Try to deal with some co-dependent tests   Simon Glass
• [PATCH 1/3] test: Allow vboot tests to run in parallel   Simon Glass
• [PATCH 2/3] test: Allow hush tests to run in parallel   Simon Glass
• [PATCH 3/3] test: Allow tpm2 tests to run in parallel   Simon Glass
• [PATCH v3 00/42] dm: Implement OF_PLATDATA_INST in driver model (part E)   Simon Glass
• [PATCH v3 01/42] dtoc: Drop use of DECL() macros   Simon Glass
• [PATCH v3 02/42] sandbox: Drop debug message in os_spl_to_uboot()   Simon Glass
• [PATCH v3 03/42] linker_lists: Allow use in data structures   Simon Glass
• [PATCH v3 04/42] dm: core: Add macros to access the new linker lists   Simon Glass
• [PATCH v3 05/42] dm: core: Allow dropping run-time binding of devices   Simon Glass
• [PATCH v3 06/42] dm: core: Adjust uclass setup with of-platdata   Simon Glass
• [PATCH v3 07/42] dm: core: Set up driver model for OF_PLATDATA_INST   Simon Glass
• [PATCH v3 08/42] dm: core: Skip adding uclasses with OF_PLATDATA_INST   Simon Glass
• [PATCH v3 09/42] dm: Add the new dtoc-generated files to the build   Simon Glass
• [PATCH v3 10/42] dm: core: Include dt-decl.h automatically   Simon Glass
• [PATCH v3 11/42] dm: test: Avoid destroying uclasses with of-platdata-inst   Simon Glass
• [PATCH v3 12/42] clk: sandbox: Move priv/plat data to a header file   Simon Glass
• [PATCH v3 13/42] clk: fixed-rate: Export driver parts for OF_PLATDATA_INST   Simon Glass
• [PATCH v3 14/42] clk: sandbox: Create a special fixed-rate driver   Simon Glass
• [PATCH v3 15/42] dm: core: Drop device_get_by_driver_info()   Simon Glass
• [PATCH v3 16/42] dm: core: Drop uclass_find_device_by_phandle() with of-platdata   Simon Glass
• [PATCH v3 17/42] sandbox: i2c: Move platdata structs to header files   Simon Glass
• [PATCH v3 18/42] dm: Rename device_get_by_driver_info_idx()   Simon Glass
• [PATCH v3 19/42] sandbox_spl: Increase SPL malloc() size   Simon Glass
• [PATCH v3 20/42] sandbox: i2c: Support i2c emulation with of-platdata   Simon Glass
• [PATCH v3 21/42] Revert "sandbox: Disable I2C emulators in SPL"   Simon Glass
• [PATCH v3 22/42] sandbox: Create a new sandbox_noinst build   Simon Glass
• [PATCH v3 23/42] test: Run sandbox_spl tests on sandbox_noinst   Simon Glass
• [PATCH v3 24/42] azure/gitlab: Add tests for sandbox_noinst   Simon Glass
• [PATCH v3 25/42] dm: core: Add an option to support SPL in read-only memory   Simon Glass
• [PATCH v3 26/42] dm: core: Create a struct for device runtime info   Simon Glass
• [PATCH v3 27/42] dm: core: Move flags to device-runtime info   Simon Glass
• [PATCH v3 28/42] dm: core: Allow storing priv/plat data separately   Simon Glass
• [PATCH v3 29/42] sandbox: Define a region for device priv/plat data   Simon Glass
• [PATCH v3 30/42] dm: core: Use separate priv/plat data region   Simon Glass
• [PATCH v3 31/42] dm: core: Add warnings to private / platform setters   Simon Glass
• [PATCH v3 32/42] dm: doc: Tidy up of-platdata docs   Simon Glass
• [PATCH v3 33/42] dm: doc: Add documentation for of-platdata-inst   Simon Glass
• [PATCH v3 34/42] x86: Define a region for device priv/plat data   Simon Glass
• [PATCH v3 35/42] x86: apl: Fix the header order in pmc   Simon Glass
• [PATCH v3 36/42] x86: apl: Tell of-platdata about a required header file   Simon Glass
• [PATCH v3 37/42] x86: itss: Tidy up bind() for of-platdata-inst   Simon Glass
• [PATCH v3 38/42] x86: Support a fake PCI device with of-platdata-inst   Simon Glass
• [PATCH v3 39/42] x86: Don't include reset driver in SPL   Simon Glass
• [PATCH v3 40/42] x86: coral: Drop ACPI properties from of-platdata   Simon Glass
• [PATCH v3 41/42] x86: coral: Drop TPM and ACPI interrupts from TPL   Simon Glass
• [PATCH v3 42/42] x86: apl: Use read-only SPL and new of-platdata   Simon Glass
• [PATCH 02/26] ppc: qemu: Update MAINTAINERS for correct email address   Simon Glass
• [PATCH 09/26] ppc: qemu: Enable OF_CONTROL   Simon Glass
• [PATCH 10/26] ppc: qemu: Enable driver model   Simon Glass
• [PATCH 13/26] cmd: Add a command to display the address map   Simon Glass
• [PATCH 11/26] include: Remove extern from addr_map.h   Simon Glass
• [PATCH 17/26] ppc: qemu: Switch over to use DM serial   Simon Glass
• [PATCH 26/26] doc: Add a reST document for qemu-ppce500   Simon Glass
• [PATCH 23/26] cmd: Fix virtio command dependency   Simon Glass
• [PATCH 12/26] lib: addr_map: Move address_map[] type to the header file   Simon Glass
• [PATCH 14/26] lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help   Simon Glass
• [PATCH 16/26] common: Move initr_addr_map() to a bit earlier   Simon Glass
• [PATCH 03/26] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Simon Glass
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Simon Glass
• [PATCH 13/26] cmd: Add a command to display the address map   Bin Meng
• [PATCH 03/26] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Bin Meng
• [PATCH v4 8/9] fastboot: Allow u-boot-style partitions   Heiko Schocher
• [PATCH 0/6] Allwinner H6 USB3 support   Samuel Holland
• [PATCH 1/6] clk: sunxi: Add a dummy clock driver for the RTC   Samuel Holland
• [PATCH 2/6] clk: sunxi: h6: Add XHCI clocks   Samuel Holland
• [PATCH 3/6] phy: sun50i-usb3: Add a driver for the H6 USB3 PHY   Samuel Holland
• [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core   Samuel Holland
• [PATCH 5/6] usb: xhci-dwc3: Add support for clocks/resets   Samuel Holland
• [PATCH 6/6] configs: Enable USB3 on Allwinner H6 boards   Samuel Holland
• [PATCH 1/2] sunxi: binman: Respect the default FIT configuration   Samuel Holland
• [PATCH 2/2] sunxi: binman: Do not hardcode U-Boot load address   Samuel Holland
• [PATCH] sunxi: Remove dead ifdefs in sunxi-common.h   Samuel Holland
• arm64: rk3399: Add support nanopi r4s   Chen-Yu Tsai
• [PATCH 0/3] test: Try to deal with some co-dependent tests   Heinrich Schuchardt
• [PATCH] arm64: rk3399: Add support NanoPi R4s   xiaobo
• [PATCH] arm64: rk3399: Add support NanoPi R4s   xiaobo
• arm64: rk3399: Add support nanopi r4s   alex tian
• [PATCH] arm64: rk3399: Add support NanoPi R4s   xiaobo
• [PATCH v4 10/16] dm: gpio: Add a way to update flags   Köry Maincent
• [PATCH v5] arm: fsl: common: Improve NXP VID driver PMBus support   Wasim Khan
• pull request of u-boot-fsl-qoriq for v2021.04   Priyanka Jain
• [PATCH 0/3] arm: mvebu: Espressobin: Set default env values at runtime   Stefan Roese
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH] pci: pci_mvebu: Disable config access to PCI host bridge ports   Stefan Roese
• [PATCH v4] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [PATCH 1/2] arm: mvebu: theadorable: Enhance "pcie" test cmd to check link width/speed   Stefan Roese
• [PATCH 2/2] arm: mvebu: theadorable: Set deephasis bit in PCIe configs very early   Stefan Roese
• [PATCH] cmd: mvebu/bubt: Fix default options in help   Stefan Roese
• [PATCH] arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz   Stefan Roese
• [PATCH u-boot-marvell] mmc: mv_sdhci: call mmc_of_parse()   Stefan Roese
• [PATCH] mmc: mv_sdhci: parse device-tree entry   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core   Marek Vasut
• How to flash Odroid Go2 u-boot   Roger Pau Monné
• [PATCH] mx8mp - clock for SPI and EQOS   Arendt, Steffen
• [PATCH] usb: xhci: Fix compare to use physical addresses in xhci_bulk_tx()   Stefan Roese
• [PATCH] usb: xhci: Fix compare to use physical addresses in xhci_bulk_tx()   Marek Vasut
• [PATCH 0/2] Add ESRT and test ESRT creation   Jose Marinho
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Jose Marinho
• [PATCH 2/2] efi: ESRT cration unit test   Jose Marinho
• [PATCH] lib: optee: migration optee_copy_fdt_nodes for OF_LIVE support   Patrick Delaunay
• [RFC PATCH v1 1/2] dm: i2c: allow disabling driver model in SPL   Heiko Schocher
• [RFC PATCH v1 2/2] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C and DM_I2C_GPIO   Heiko Schocher
• [PATCH v2 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick Delaunay
• [PATCH v2 1/7] lmb: Add support of flags for no-map properties   Patrick Delaunay
• [PATCH v2 2/7] lmb: add lmb_is_reserved_flags   Patrick Delaunay
• [PATCH v2 3/7] lmb: add lmb_dump_region() function   Patrick Delaunay
• [PATCH v2 4/7] test: lmb: add test for lmb_reserve_flags   Patrick Delaunay
• [PATCH v2 5/7] image-fdt: save no-map parameter of reserve-memory   Patrick Delaunay
• [PATCH v2 6/7] stm32mp: don't map the reserved region with no-map property   Patrick Delaunay
• [PATCH v2 7/7] arm: cache: cp15: don't map the reserved region with no-map property   Patrick Delaunay
• [RFC PATCH] nvme: Always invalidate whole cqes[] array   Andre Przywara
• [PATCH] nvme: Fix cache alignment   Andre Przywara
• [PATCH 01/10] README: Add doumentation for version information   Patrick DELAUNAY
• How to flash Odroid Go2 u-boot   Peter Robinson
• [PATCH 02/10] Makefile: Provide numeric versions   Patrick DELAUNAY
• [PATCH] pci: pci_mvebu: Disable config access to PCI host bridge ports   Marek Behun
• [PATCH 03/26] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Simon Glass
• [PATCH 13/26] cmd: Add a command to display the address map   Simon Glass
• [PATCH] pci: pci_mvebu: Disable config access to PCI host bridge ports   Stefan Roese
• [PATCH] pci: pci_mvebu: Disable config access to PCI host bridge ports   Pali Rohár
• [PATCH] pci: pci_mvebu: Disable config access to PCI host bridge ports   Marek Behun
• [RFC PATCH v2 1/2] optee: obtain emmc rpmb info from dt   Patrick DELAUNAY
• [PATCH] nvme: Fix cache alignment   Bin Meng
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• [PATCH] nvme: Fix cache alignment   Marek Vasut
• How to flash Odroid Go2 u-boot   Roger Pau Monné
• [PATCH u-boot-marvell] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-14.0.0   Marek Behún
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Marek Szyprowski
• [PATCH u-boot-marvell] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-14.0.0   Stefan Roese
• [PATCH] nvme: Fix cache alignment   Andre Przywara
• [PATCH u-boot-marvell] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-14.0.0   Marek Behun
• [PATCH 13/13] arm: stm32: Disable ATAGs support   Patrick DELAUNAY
• [PATCH v4] fastboot: add UUU command UCmd and ACmd support   Patrick DELAUNAY
• Wrong check for last block in lib/efi_loader/efi_disk.c?   Jesper Schmitz Mouridsen
• [PATCH v1] test: Allow simple glob pattern in the test name   Simon Glass
• [PATCH 01/10] README: Add doumentation for version information   Simon Glass
• [PATCH 0/3] test: Try to deal with some co-dependent tests   Simon Glass
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Simon Glass
• [PATCH 1/2] sunxi: binman: Respect the default FIT configuration   Simon Glass
• [PATCH 2/2] sunxi: binman: Do not hardcode U-Boot load address   Simon Glass
• [PATCH 2/3] cmd: SCP03: enable and provision command   Simon Glass
• [PATCH 01/13] arm: nanopi2: Remove unused code   Stefan Bosch
• [PATCH v4 10/16] dm: gpio: Add a way to update flags   Patrick DELAUNAY
• [PATCH v1] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Heinrich Schuchardt
• [PATCH v4 16/16] gpio: Add a way to read 3-way strapping pins   Patrick DELAUNAY
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behún
• [PATCH u-boot-marvell 01/18] ddr: marvell: a38x: fix write leveling suplementary algo   Marek Behún
• [PATCH u-boot-marvell 02/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell 03/18] ddr: marvell: a38x: add ddr32 support   Marek Behún
• [PATCH u-boot-marvell 04/18] ddr: marvell: a38x: add ddr 32bit ECC support   Marek Behún
• [PATCH u-boot-marvell 05/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell 06/18] ddr: marvell: a38x: fix 32bit   Marek Behún
• [PATCH u-boot-marvell 07/18] ddr: marvell: a38x: fix memory size calculation using 32bit bus width   Marek Behún
• [PATCH u-boot-marvell 08/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell 09/18] ddr: marvell: a38x: allow board specific ODT configuration   Marek Behún
• [PATCH u-boot-marvell 10/18] ddr: marvell: a38x: add 16Gbit memory devices support   Marek Behún
• [PATCH u-boot-marvell 11/18] ddr: marvell: a38x: add support for twin-die combined memory device   Marek Behún
• [PATCH u-boot-marvell 12/18] ddr: marvell: a38x: disable WL phase correction stage in case of bus_width=16bit   Marek Behún
• [PATCH u-boot-marvell 13/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell 14/18] ddr: marvell: a38x: fix memory cs size function   Marek Behún
• [PATCH u-boot-marvell 15/18] ddr: marvell: a38x: import code change from upstream   Marek Behún
• [PATCH u-boot-marvell 16/18] ddr: marvell: a38x: enum mv_ddr_twin_die: change order   Marek Behún
• [PATCH u-boot-marvell 17/18] ddr: marvell: a38x: bump version to 14.0.0   Marek Behún
• [PATCH u-boot-marvell 18/18] ddr: marvell: a38x: fix comment in conditional macro   Marek Behún
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behún
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behun
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH 2/3] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz, Foundries
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behun
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• pull request of u-boot-fsl-qoriq for v2021.04   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH 3/5] arm: stm32mp: Implement support for TZC 400 controller   Alex G.
• [PATCH u-boot-marvell 0/5] pci_mvebu changes   Marek Behún
• [PATCH u-boot-marvell 1/5] pci: pci_mvebu: use dev_seq instead of static variable   Marek Behún
• [PATCH u-boot-marvell 2/5] pci: pci_mvebu: cosmetic fix   Marek Behún
• [PATCH u-boot-marvell 3/5] pci: pci_mvebu: debug rd/wr config as other drivers do   Marek Behún
• [PATCH u-boot-marvell 4/5] pci: pci_mvebu: refactor validation of addresses for config access   Marek Behún
• [PATCH u-boot-marvell 5/5] pci: pci_mvebu: set local dev to number 1   Marek Behún
• [PATCH 1/4] arm: a37xx: pci: Set Max Payload Size and Max Read Request Size to 512 bytes   Marek Behun
• [PATCH 2/4] arm: mvebu: turris_mox: Enable CONFIG_PCI_PNP   Marek Behun
• [PATCH 3/4] arm: mvebu: turris_mox: Enable CONFIG_USB_XHCI_PCI   Marek Behun
• [PATCH 4/4] arm: mvebu: turris_mox: Enable NVMe support   Marek Behun
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Heinrich Schuchardt
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Heinrich Schuchardt
• [PATCH 0/3] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Lukasz Majewski
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [PATCH 1/4] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [PATCH 3/4] imxrt1050 dtsi gpt1 node   Giulio Benetti
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [PATCH 4/4] timer: imx-gpt: Add basic timer support for i.MX SoCs family   Giulio Benetti
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Marek Vasut
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [RFC PATCH v2 1/2] optee: obtain emmc rpmb info from dt   Igor Opaniuk
• [PATCH v2 0/3] Allow disabling driver model for I2C in SPL   Igor Opaniuk
• [PATCH v2 1/3] dm: i2c: allow disabling driver model in SPL   Igor Opaniuk
• [PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL   Igor Opaniuk
• [PATCH v2 3/3] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO   Igor Opaniuk
• [PATCH v4 16/16] gpio: Add a way to read 3-way strapping pins   Simon Glass
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH 2/6] clk: sunxi: h6: Add XHCI clocks   Andre Przywara
• [PATCH 3/6] phy: sun50i-usb3: Add a driver for the H6 USB3 PHY   Andre Przywara
• [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core   Andre Przywara
• [PATCH 5/6] usb: xhci-dwc3: Add support for clocks/resets   Andre Przywara
• [PATCH 6/6] configs: Enable USB3 on Allwinner H6 boards   Andre Przywara
• [PATCH 0/6] Allwinner H6 USB3 support   Andre Przywara
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL   Tom Rini
• [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core   Samuel Holland
• [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core   Samuel Holland
• [PATCH u-boot-marvell] ARM: dts: armada-385-turris-omnia: rename node in -u-boot.dtsi file   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 0/6] Support SPI NORs and OF partitions in `mtd list`   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 1/6] dm: add non-translating version of ofnode_get_addr_size_index   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 2/6] mtd: add support for parsing partitions defined in OF   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 3/6] mtd: spi-nor: allow registering multiple MTDs when DM is enabled   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 4/6] mtd: spi-nor: fill-in mtd->dev member   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 5/6] mtd: remove mtd_probe function   Marek Behún
• [PATCH u-boot-dm + u-boot-spi 6/6] mtd: probe SPI NOR devices in mtd_probe_devices()   Marek Behún
• [PATCH 5/6] usb: xhci-dwc3: Add support for clocks/resets   Samuel Holland
• [PATCH v9] Add support for stack-protector   Joel Peshkin
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Simon Glass
• [PATCH v4 10/16] dm: gpio: Add a way to update flags   Simon Glass
• Contributor meeting notes 19-Jan-21   Simon Glass
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Simon Glass
• [PATCH u-boot-dm + u-boot-spi 1/6] dm: add non-translating version of ofnode_get_addr_size_index   Simon Glass
• [PATCH v1 1/1] drivers: mmc: iproc_sdhci: enable HS200 mode   Rayagonda Kokatanur
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   AKASHI Takahiro
• [PATCH v4 2/9] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v4 3/9] mtd: spi-nor-core: Add support for Read/Write Any Register   Takahiro Kuwano
• [PATCH v4 4/9] mtd: spi-nor-core: Add support for volatile QE bit   Takahiro Kuwano
• [PATCH v4 5/9] mtd: spi-nor-core: Add the ->ready() hook   Takahiro Kuwano
• [PATCH] efi_loader: don't load beyond VirtualSize   Asherah Connor
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Heinrich Schuchardt
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Heinrich Schuchardt
• [PATCH] efi_loader: don't load beyond VirtualSize   Heinrich Schuchardt
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH v4] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [PATCH 07/13] arm: aspeed: Disable ATAGs support   ChiaWei Wang
• [PATCH] efi_loader: don't load beyond VirtualSize   Asherah Connor
• [PATCH] efi_loader: don't load beyond VirtualSize   Heinrich Schuchardt
• [PATCH] arm64: zynqmp: Do not clear reset reason   Michal Simek
• [PATCH 1/4] arm: a37xx: pci: Set Max Payload Size and Max Read Request Size to 512 bytes   Stefan Roese
• [PATCH 2/4] arm: mvebu: turris_mox: Enable CONFIG_PCI_PNP   Stefan Roese
• [PATCH 3/4] arm: mvebu: turris_mox: Enable CONFIG_USB_XHCI_PCI   Stefan Roese
• [PATCH 4/4] arm: mvebu: turris_mox: Enable NVMe support   Stefan Roese
• [PATCH] ARM: dts: k3-j7200-common-proc-board-u-boot: Fix broken ethernet   Vignesh Raghavendra
• [PATCH 1/3] cmd: env: Add 'env import -h' for Marvell hw_info formatted environments   Stefan Roese
• [PATCH 0/2] Improve iMX8 FEC ENET MAC settings   Oleksandr Suvorov
• [PATCH 1/2] ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8X   Oleksandr Suvorov
• [PATCH 2/2] board: toradex: move RGMII delays to PHY side   Oleksandr Suvorov
• [PATCH 1/2] ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8X   Marek Vasut
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Marek Szyprowski
• [PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL   Igor Opaniuk
• [PATCH 1/2] ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8X   Ramon Fried
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Pali Rohár
• [PATCH 1/4] configs: stm32mp1: enable fastboot support of eMMC boot partition   Patrick DELAUNAY
• [PATCH 2/4] configs: stm32mp1: enable the fastboot oem command format   Patrick DELAUNAY
• [PATCH 3/4] configs: stm32mp1: enable the fastboot oem command partconf   Patrick DELAUNAY
• [PATCH 4/4] configs: stm32mp1: enable the fastboot oem command bootbus   Patrick DELAUNAY
• [PATCH 1/2] pinctrl: stmfx: Fix pin configuration issue   Patrick DELAUNAY
• [PATCH 2/2] pinctrl: stmfx: Use PINNAME_SIZE for pin's name size   Patrick DELAUNAY
• [PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL   Igor Opaniuk
• [PATCH 1/2] pinctrl: stm32: correct management pin display of OTYPE   Patrick DELAUNAY
• [PATCH 2/2] pinctrl: stm32: bind only the enabled GPIO subnode   Patrick DELAUNAY
• [PATCH] clk: stm32mp1: add support of I2C6_K   Patrick DELAUNAY
• [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core   Marek Vasut
• [PATCH] ARM: dts: stm32: Fix cosmetic typo: use 'kHz' as kilohertz abbreviation   Patrick DELAUNAY
• [PATCH] usb: dwc2: change compatible st, stm32mp1-hsotg to st, stm32mp15-hsotg   Patrick Delaunay
• [PATCH u-boot-marvell] ARM: dts: armada-385-turris-omnia: rename node in -u-boot.dtsi file   Stefan Roese
• [PATCH] usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg   Marek Vasut
• [PATCH 0/6] Allwinner H6 USB3 support   Andre Heider
• [PATCH 0/3] env: sf: add support of command env erase   Patrick Delaunay
• [PATCH 1/3] env: add ENV_ERASE_PTR macro   Patrick Delaunay
• [PATCH 2/3] env: sf: update the use of macro ENV_SAVE_PTR   Patrick Delaunay
• [PATCH 3/3] env: sf: add support of command env erase   Patrick Delaunay
• [RFC PATCH] nvme: Always invalidate whole cqes[] array   Bin Meng
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   AKASHI Takahiro
• [RFC PATCH] nvme: Always invalidate whole cqes[] array   Michael Nazzareno Trimarchi
• [RFC PATCH] efi_loader: disable GRUB workaround by default   matthias.bgg at kernel.org
• [PATCH v3 0/3] Allow disabling driver model for I2C in SPL   Igor Opaniuk
• [PATCH v3 1/3] dm: i2c: allow disabling driver model in SPL   Igor Opaniuk
• [PATCH v3 2/3] board: freescale: drop CONFIG_DM_I2C undefs   Igor Opaniuk
• [PATCH v3 3/3] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO   Igor Opaniuk
• [RFC PATCH] efi_loader: disable GRUB workaround by default   Heinrich Schuchardt
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Heinrich Schuchardt
• [PATCH 01/25] arm: Remove xfi3 board   Tom Rini
• [PATCH 02/25] arm: Remove mx23evk board   Tom Rini
• [PATCH 03/25] arm: Remove MX23_OLINUXINO board   Tom Rini
• [PATCH 04/25] arm: Remove SANSA_FUZE_PLUS board   Tom Rini
• [PATCH 05/25] arm: imx: Remove MX23 support   Tom Rini
• [PATCH 06/25] arm: Remove mx28evk board   Tom Rini
• [PATCH 07/25] arm: Remove apx4devkit board   Tom Rini
• [PATCH 08/25] arm: Remove sc_sps_1 board   Tom Rini
• [PATCH 09/25] arm: Remove ts4600 board   Tom Rini
• [PATCH 10/25] arm: Remove mx35pdk board   Tom Rini
• [PATCH 11/25] arm: Remove apf27 board   Tom Rini
• [PATCH 12/25] arm: Remove mx25pdk board   Tom Rini
• [PATCH 13/25] arm: Remove openrd board   Tom Rini
• [PATCH 14/25] arm: Remove sheevaplug board   Tom Rini
• [PATCH 15/25] arm: Remove 32bit vexpress boards   Tom Rini
• [PATCH 16/25] arm: Remove gwventana boards   Tom Rini
• [PATCH 17/25] arm: Remove secomx6quq7 board   Tom Rini
• [PATCH 18/25] arm: Remove ls2080a_simu board   Tom Rini
• [PATCH 19/25] arm: Remove s32v234evb board   Tom Rini
• [PATCH 20/25] arm: Remove bcm958712k board   Tom Rini
• [PATCH 21/25] arm: Remove wb45n board   Tom Rini
• [PATCH 22/25] arm: Remove wb50n board   Tom Rini
• [PATCH 23/25] arm: Remove picosam9g45 board   Tom Rini
• [PATCH 24/25] arm: Remove db-88f6281-bp board   Tom Rini
• [PATCH 25/25] arm: Remove warp board   Tom Rini
• [ADDRESS CONVERTED] [PATCH 07/25] arm: Remove apx4devkit board   Lauri Hintsala
• [PATCH 06/25] arm: Remove mx28evk board   Lukasz Majewski
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH 06/25] arm: Remove mx28evk board   Tom Rini
• [ADDRESS CONVERTED] [PATCH 07/25] arm: Remove apx4devkit board   Tom Rini
• [PATCH 0/8] rockchip: resurrect rk3368 functionality and make lion bootable again   Heiko Stuebner
• [PATCH 1/8] rockchip: rk3368: adjust CONFIG_SYS_LOAD_ADDR   Heiko Stuebner
• [PATCH 2/8] rockchip: rk3368: set CONFIG_SYS_BOOTM_LEN to 64MB   Heiko Stuebner
• [PATCH 3/8] rockchip: rk3368: increase SYS_MALLOC_F_LEN to 0x4000   Heiko Stuebner
• [PATCH 4/8] rockchip: rk3368: move STACK_R_ADDR address and into Kconfig   Heiko Stuebner
• [PATCH 5/8] rockchip: rk3368: sync clock dt-binding header from Linux   Heiko Stuebner
• [PATCH 6/8] rockchip: rk3368: sync main rk3368 dtsi from Linux   Heiko Stuebner
• [PATCH 7/8] rockchip: rk3368: sync down rk3368-lion board devicetree from Linux   Heiko Stuebner
• [PATCH 8/8] rockchip: lion: update board defconfig   Heiko Stuebner
• [RFC PATCH] efi_loader: disable GRUB workaround by default   Matthias Brugger
• [PATCH u-boot-dm + u-boot-spi v2 0/7] Support SPI NORs and OF partitions in `mtd list`   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 1/7] dm: core: add test for ofnode_get_addr_size_index()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 2/7] dm: core: add non-translating version of ofnode_get_addr_size_index()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 3/7] mtd: add support for parsing partitions defined in OF   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 4/7] mtd: spi-nor: allow registering multiple MTDs when DM is enabled   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 5/7] mtd: spi-nor: fill-in mtd->dev member   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 6/7] mtd: remove mtd_probe function   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 7/7] mtd: probe SPI NOR devices in mtd_probe_devices()   Marek Behún
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH] arm: dts: stm32mp15: alignment with v5.11-rc2   Patrick DELAUNAY
• [PULL] Pull request for u-boot master / v2021.04 = u-boot-stm32-20210209   Patrick DELAUNAY
• [PATCH 0/5] Enable ECDSA FIT verification for stm32mp   Patrick DELAUNAY
• [PATCH 2/5] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Patrick DELAUNAY
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Simon Glass
• [PATCH 3/5] lib: ecdsa: Implement signature verification for crypto_algo API   Patrick DELAUNAY
• [PATCH 10/25] arm: Remove mx35pdk board   Stefano Babic
• [PATCH 05/25] arm: imx: Remove MX23 support   Stefano Babic
• [PATCH 0/1] Allow last block to be read   Jesper Schmitz Mouridsen
• [PATCH 1/1] Allow last block to be read   Jesper Schmitz Mouridsen
• [PATCH u-boot] fs: btrfs: do not fail when offset of a ROOT_ITEM is not -1   Marek Behún
• [PATCH btrfs-progs] btrfs-progs: do not fail when offset of a ROOT_ITEM is not -1   Marek Behún
• [PATCH 1/1] sandbox: allow cross-compiling sandbox   Heinrich Schuchardt
• [PATCH u-boot 1/2] fs: btrfs: skip xattrs in directory listing   Marek Behún
• [PATCH u-boot 2/2] fs: btrfs: change directory list output to be aligned as before   Marek Behún
• [PATCH 0/3] Misc fixes for SPL_FIT_SIGNATURE builds   Klaus Heinrich Kiwi
• [PATCH 1/3] Kconfig: SPL_FIT_SIGNATURE selects FIT_SIGNATURE   Klaus Heinrich Kiwi
• [PATCH 2/3] Kconfig: SPL_FIT_SIGNATURE requires SPL_LOAD_FIT   Klaus Heinrich Kiwi
• [PATCH 3/3] Makefile: Add (default) DEVICE_TREE to SPL FIT   Klaus Heinrich Kiwi
• [PATCHv4 1/6] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz
• [PATCHv4 2/6] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCHv4 3/6] drivers: tee: sandbox: SCP03 control emulator   Jorge Ramirez-Ortiz
• [PATCHv4 4/6] doc: describe the scp03 command   Jorge Ramirez-Ortiz
• [PATCHv4 5/6] sandbox: imply SCP03 and CMD_SCP03   Jorge Ramirez-Ortiz
• [PATCHv4 6/6] test: py: add initial coverage for scp03 cmd   Jorge Ramirez-Ortiz
• [PATCH] usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg   Patrick DELAUNAY
• [PATCHv5 1/6] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz
• [PATCHv5 2/6] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCHv5 3/6] drivers: tee: sandbox: SCP03 control emulator   Jorge Ramirez-Ortiz
• [PATCHv5 4/6] doc: describe the scp03 command   Jorge Ramirez-Ortiz
• [PATCHv5 5/6] sandbox: imply SCP03 and CMD_SCP03   Jorge Ramirez-Ortiz
• [PATCHv5 6/6] test: py: add initial coverage for scp03 cmd   Jorge Ramirez-Ortiz
• [PATCH u-boot] cmd: pinmux: depend on PINCTRL   Marek Behún
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH 1/1] efi_loader: '.' and '..' are directories   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix get_last_capsule()   Heinrich Schuchardt
• [PATCH v9] Add support for stack-protector   Heinrich Schuchardt
• [PATCH] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse Taube
• [PATCH 0/5] Enable ECDSA FIT verification for stm32mp   Alex G.
• [PATCH v1 1/1] drivers: mmc: iproc_sdhci: enable HS200 mode   Jaehoon Chung
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Chris Packham
• [PATCH] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 2/5] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Alex G.
• [PATCH u-boot-marvell 1/4] rtc: add armada38x driver   Marek Behún
• [PATCH u-boot-marvell 2/4] arm: mvebu: turris_omnia: Enable DM_RTC and RTC_ARMADA38X   Marek Behún
• [PATCH u-boot-marvell 3/4] arm: mvebu: turris_omnia: Enable CMD_WDT   Marek Behún
• [PATCH u-boot-marvell 4/4] arm: mvebu: turris_omnia: Enable CMD_FS_UUID   Marek Behún
• [PATCH 3/5] lib: ecdsa: Implement signature verification for crypto_algo API   Alex G.
• [PATCH v2 0/1] Add driver support for the IMX General Purpose Timer (GPT) available   Jesse Taube
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse Taube
• [PATCH u-boot] fs: btrfs: do not fail when offset of a ROOT_ITEM is not -1   Qu Wenruo
• [PATCH u-boot 2/2] fs: btrfs: change directory list output to be aligned as before   Qu Wenruo
• [PATCH u-boot 1/2] fs: btrfs: skip xattrs in directory listing   Qu Wenruo
• [PATCH 00/26] ppc: qemu: Convert qemu-ppce500 to driver model   Bin Meng
• [PATCH 1/1] efi_loader: fix get_last_capsule()   AKASHI Takahiro
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Bin Meng
• [PATCH u-boot] fs: btrfs: do not fail when offset of a ROOT_ITEM is not -1   Marek Behun
• [PATCH u-boot] fs: btrfs: do not fail when offset of a ROOT_ITEM is not -1   Qu Wenruo
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PATCH v4 6/9] mtd: spi-nor-core: Add overlaid sector erase feature   Takahiro Kuwano
• [PATCH 01/16] ls1012aqds_tfa_SECURE_BOOT: Remove unused CONFIG_SCSI_AHCI   Tom Rini
• [PATCH 02/16] am57xx_hs_evm_usb: Enable AHCI and BLK   Tom Rini
• [PATCH 03/16] ata: DWC_AHSATA depends on BLK   Tom Rini
• [PATCH 04/16] ppc: configs: Remove a few non-updated build configurations   Tom Rini
• [PATCH 05/16] arm: Remove highbank board   Tom Rini
• [PATCH 06/16] arm: Remove dms-ba16 board   Tom Rini
• [PATCH 07/16] arm: Remove ot1200 board   Tom Rini
• [PATCH 08/16] arm: Remove mx53loco board   Tom Rini
• [PATCH 09/16] ppc: Remove MPC8349ITX board   Tom Rini
• [PATCH 10/16] ppc: Remove MPC8544DS board   Tom Rini
• [PATCH 11/16] ppc: Remove MPC8572DS board   Tom Rini
• [PATCH 12/16] ppc: Remove MPC8610HPCD board   Tom Rini
• [PATCH 13/16] ppc: Remove MPC8641HPCN board   Tom Rini
• [PATCH 14/16] boards: Disable CMD_SATA on platforms that no longer have a SATA driver enabled   Tom Rini
• [PATCH 15/16] drivers: ata: Remove mvsata_ide driver   Tom Rini
• [PATCH 16/16] ata: Make LIBATA means AHCI is enabled mandatory.   Tom Rini
• [PATCH v5 2/4] button: add a simple Analog to Digital Converter device based button driver   Simon Glass
• [PATCH u-boot-dm + u-boot-spi v2 1/7] dm: core: add test for ofnode_get_addr_size_index()   Simon Glass
• [PATCH u-boot-dm + u-boot-spi v2 2/7] dm: core: add non-translating version of ofnode_get_addr_size_index()   Simon Glass
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Simon Glass
• [ADDRESS CONVERTED] [PATCH 07/25] arm: Remove apx4devkit board   Lauri Hintsala
• [PATCH 1/1] efi_loader: fix get_last_capsule()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix get_last_capsule()   AKASHI Takahiro
• Uboot - SPL issue imx6   Deepanraj
• [PATCH 1/1] efi_loader: fix get_last_capsule()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix get_last_capsule()   Heinrich Schuchardt
• [PATCH 24/25] arm: Remove db-88f6281-bp board   Chris Packham
• [PATCH 14/25] arm: Remove sheevaplug board   Chris Packham
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Stefan Roese
• [PATCH v5] fastboot: add UUU command UCmd and ACmd support   Heiko Schocher
• [PATCH v4 10/16] dm: gpio: Add a way to update flags   Patrick DELAUNAY
• [PATCH] board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants   Neil Armstrong
• [PATCH v4 9/9] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH u-boot-dm + u-boot-spi v2 7/7] mtd: probe SPI NOR devices in mtd_probe_devices()   Pali Rohár
• [PATCH u-boot-dm + u-boot-spi v2 6/7] mtd: remove mtd_probe function   Pali Rohár
• [PATCH u-boot-dm + u-boot-spi v2 5/7] mtd: spi-nor: fill-in mtd->dev member   Pali Rohár
• [PATCH u-boot-dm + u-boot-spi v2 4/7] mtd: spi-nor: allow registering multiple MTDs when DM is enabled   Pali Rohár
• [PATCH u-boot-dm + u-boot-spi v2 3/7] mtd: add support for parsing partitions defined in OF   Pali Rohár
• [PATCH u-boot-marvell] ARM: dts: armada-385-turris-omnia: rename node in -u-boot.dtsi file   Pali Rohár
• [PATCH] efidebug: Introduce bootmgr command   Ilias Apalodimas
• [PATCH] doc: update efidebug command   Ilias Apalodimas
• [PATCH] efidebug: Introduce bootmgr command   Wolfgang Denk
• [PATCH] efidebug: Introduce bootmgr command   Ilias Apalodimas
• [PATCH 0/4] clk: Add support to enable clocks   Michal Simek
• [PATCH] xilinx: common: Fix CONFIG_XILINX_OF_BOARD_DTB_ADDR handling for ZynqMP   Michal Simek
• [PATCH] xilinx: Show silicon version in SPL   Michal Simek
• [PATCH] efidebug: Introduce bootmgr command   Wolfgang Denk
• [PATCH v2 0/5] clk: Add support to enable clocks   Michal Simek
• [PATCH v2 1/5] clk: zynq: Add dummy clock enable function   Michal Simek
• [PATCH v2 2/5] clk: zynqmp: Add support to enable clocks   Michal Simek
• [PATCH v2 3/5] clk: versal: Add support to enable clocks   Michal Simek
• [PATCH v2 4/5] i2c: i2c_cdns: Enable i2c clock   Michal Simek
• [PATCH v2 5/5] net: gem: Enable ethernet rx clock for versal   Michal Simek
• [PATCH] efidebug: Introduce bootmgr command   Ilias Apalodimas
• [PATCH] efidebug: Introduce bootmgr command   AKASHI Takahiro
• [PATCH] efidebug: Introduce bootmgr command   Heinrich Schuchardt
• [PULL u-boot] Please pull u-boot-amlogic-20210210   Neil Armstrong
• [PATCH u-boot-dm + u-boot-spi v2 0/7] Support SPI NORs and OF partitions in `mtd list`   Patrice CHOTARD
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PATCH u-boot-dm + u-boot-spi v2 0/7] Support SPI NORs and OF partitions in `mtd list`   Marek Behun
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Patrice Chotard
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Marek Vasut
• [PATCH] configs: meson64: add fdtoverlay_addr_r   Neil Armstrong
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Marek Vasut
• [PATCH u-boot-dm + u-boot-spi v2 0/7] Support SPI NORs and OF partitions in `mtd list`   Patrice CHOTARD
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PATCH u-boot-dm + u-boot-spi v2 0/7] Support SPI NORs and OF partitions in `mtd list`   Marek Behun
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Marek Vasut
• [PATCH u-boot-dm + u-boot-spi v2 0/7] Support SPI NORs and OF partitions in `mtd list`   Marek Behun
• [PATCH] efidebug: Introduce bootmgr command   Ilias Apalodimas
• [PATCH] efidebug: Introduce bootmgr command   Wolfgang Denk
• [PATCH] efidebug: Introduce bootmgr command   Wolfgang Denk
• [PATCH u-boot] fs: btrfs: do not fail when offset of a ROOT_ITEM is not -1   Marek Behun
• [PATCH] config: hikey: convert to DM_USB and DM_ETH   Peter Robinson
• [PATCH v2 0/1] Add driver support for the IMX General Purpose Timer (GPT) available   Giulio Benetti
• [PATCH v2] config: hikey: convert to DM_USB and DM_ETH   Peter Robinson
• [PATCH 16/25] arm: Remove gwventana boards   Tim Harvey
• [PATCH 16/25] arm: Remove gwventana boards   Tom Rini
• [PATCH] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH] arm: dts: allwinner: sync from linux for RGMII RX/TX delay fixes   Peter Robinson
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH v3 2/3] board: freescale: drop CONFIG_DM_I2C undefs   Tom Rini
• [PATCH v3 1/3] dm: i2c: allow disabling driver model in SPL   Tom Rini
• [PATCH v3 3/3] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO   Tom Rini
• [PULL] Pull request for u-boot master / v2021.04 = u-boot-stm32-20210209   Tom Rini
• [PATCH 1/6] sh: Remove MigoR board   Tom Rini
• [PATCH 2/6] sh: Remove r7780mp board   Tom Rini
• [PATCH 3/6] sh: Remove sh7752evb board   Tom Rini
• [PATCH 4/6] sh: Remove sh7753evb board   Tom Rini
• [PATCH 5/6] sh: Remove sh7757lcr board   Tom Rini
• [PATCH 6/6] sh: Remove sh7763rdp board   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20210210   Tom Rini
• [PATCH 13/13] arm: stm32: Disable ATAGs support   Tom Rini
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Sean Anderson
• [PATCH v2 1/1] sandbox: allow cross-compiling sandbox   Heinrich Schuchardt
• [PATCH 1/1] malloc: adjust memcpy() and memset() definitions.   Heinrich Schuchardt
• [PATCH v2 1/1] sandbox: allow cross-compiling sandbox   Sean Anderson
• [PATCH v3] armv8: Handle EL2 Host mode   Mark Kettenis
• [PATCH 1/2] ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8X   Oliver Graute
• [PATCH v2 1/1] sandbox: allow cross-compiling sandbox   Sean Anderson
• [PATCH 1/2] mtd: nand: spi: Only one dummy byte in QUADIO   Reto Schneider
• [PATCH 2/2] mtd: nand: spi: Support GigaDevice GD5F1GQ5UExxG   Reto Schneider
• Final of-platdata thing   Simon Glass
• [PATCH v3] armv8: Handle EL2 Host mode   Mark Kettenis
• [PATCH v4] armv8: Handle EL2 Host mode   Mark Kettenis
• [PATCH 1/2] ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8X   Fabio Estevam
• [PATCH 2/2] board: toradex: move RGMII delays to PHY side   Fabio Estevam
• [PATCH v2 2/2] board: imx8mp: add boot.cmd for distro boot on iMX8MP   Dennis Gilmore
• [V2 2/3] ARM: mvebu: helios4 dts changes to enable SPI   Dennis Gilmore
• [PATCH v2 2/2] board: imx8mp: add boot.cmd for distro boot on iMX8MP   Fabio Estevam
• [EXTERNAL] Re: U-Boot ECDSA Implementation Question   Tim Romanski
• [PATCH] usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg   Tom Rini
• [PATCH v2 2/2] board: imx8mp: add boot.cmd for distro boot on iMX8MP   Stefano Babic
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 14/25] arm: Remove sheevaplug board   Rick Thomas
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 14/25] arm: Remove sheevaplug board   Tom Rini
• [PATCH v5 6/6] test/py: ecdsa: Add test for mkimage ECDSA signing   Alex G.
• [V2 2/3] ARM: mvebu: helios4 dts changes to enable SPI   Tom Rini
• [PATCH] usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg   Marek Vasut
• [PATCH u-boot] cmd: pinmux: depend on PINCTRL   Simon Glass
• [PATCH 1/1] malloc: adjust memcpy() and memset() definitions.   Simon Glass
• [PATCH v2 1/1] sandbox: allow cross-compiling sandbox   Simon Glass
• [PATCH] net: gem: unregister mdio bus if probe fails   Michael Walle
• [PATCH] fpga: zynqpl: fix buffer alignment   Michael Walle
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH u-boot] fs: btrfs: do not fail when offset of a ROOT_ITEM is not -1   Qu Wenruo
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH] tools: fdtgrep: Use unsigned chars for arrays   Samuel Dionne-Riel
• [PATCH 14/25] arm: Remove sheevaplug board   Rick Thomas
• [PATCH 14/25] arm: Remove sheevaplug board   Rick Thomas
• [PATCH 14/25] arm: Remove sheevaplug board   Tom Rini
• [PATCH 14/25] arm: Remove sheevaplug board   Rick Thomas
• [V2 2/3] ARM: mvebu: helios4 dts changes to enable SPI   Stefan Roese
• [PATCH 14/25] arm: Remove sheevaplug board   Vagrant Cascadian
• [PATCH 14/25] arm: Remove sheevaplug board   Rick Thomas
• [PATCH v2 4/5] i2c: i2c_cdns: Enable i2c clock   Heiko Schocher
• [PATCH] clk: at91: compat: partially revert "dm: Remove uses of device_bind_offset()"   Eugen.Hristev at microchip.com
• [PATCH] ARM: dts: at91: sama7g5ek: enable pull-up for serial debug line   Eugen.Hristev at microchip.com
• [PATCH v6 0/5] VIM3: add support for checking 'Function' button state   Marek Szyprowski
• [PATCH v6 1/5] dt-bindings: input: adc-keys bindings documentation   Marek Szyprowski
• [PATCH v6 2/5] button: add a simple Analog to Digital Converter device based button driver   Marek Szyprowski
• [PATCH v6 3/5] adc: meson-saradc: add support for getting reference voltage value   Marek Szyprowski
• [PATCH v6 4/5] configs: khadas-vim3(l): enable Function button support   Marek Szyprowski
• [PATCH v6 5/5] test: add a simple test for the adc-keys button driver   Marek Szyprowski
• qemu-arm: hang during MMU initialization   Ard Biesheuvel
• [PATCH 1/2] mtd: nand: spi: Only one dummy byte in QUADIO   Stefan Roese
• [PATCH 2/2] mtd: nand: spi: Support GigaDevice GD5F1GQ5UExxG   Stefan Roese
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Patrice CHOTARD
• [PATCH v4] armv8: Handle EL2 Host mode   Marc Zyngier
• [PATCH v6 5/5] test: add a simple test for the adc-keys button driver   Heinrich Schuchardt
• [PATCH v4] armv8: Handle EL2 Host mode   Mark Kettenis
• [PATCH 18/25] arm: Remove ls2080a_simu board   Priyanka Jain
• [PATCH 13/16] ppc: Remove MPC8641HPCN board   Priyanka Jain
• [PATCH 12/16] ppc: Remove MPC8610HPCD board   Priyanka Jain
• [PATCH 11/16] ppc: Remove MPC8572DS board   Priyanka Jain
• [PATCH 10/16] ppc: Remove MPC8544DS board   Priyanka Jain
• [PATCH v3 3/3] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO   Priyanka Jain
• [PATCH v4] armv8: Handle EL2 Host mode   Marc Zyngier
• [PATCH 1/1] buildman: 'Thread' object has no attribute 'isAlive'   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: fix get_last_capsule()   Heinrich Schuchardt
• [Uboot-stm32] [PATCH] usb: dwc2: change compatible st, stm32mp1-hsotg to st, stm32mp15-hsotg   Ahmad Fatoum
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Marek Vasut
• [PATCH v2 1/2] mtd: nand: spi: Only one dummy byte in QUADIO   Reto Schneider
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Igor Opaniuk
• [PATCH v2 1/2] mtd: nand: spi: Only one dummy byte in QUADIO   Reto Schneider
• [PATCH v2 2/2] mtd: nand: spi: Support GigaDevice GD5F1GQ5UExxG   Reto Schneider
• [PATCH] configs: fsl: move bootrom specific defines to Kconfig   Rajesh Bhagat
• [Uboot-stm32] [PATCH] usb: dwc2: change compatible st, stm32mp1-hsotg to st, stm32mp15-hsotg   Tom Rini
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Heinrich Schuchardt
• [PATCH v2 1/4] test: Include /sbin to the PATH when creating ext4 disk image   Andy Shevchenko
• [PATCH v2 2/4] test: Allow simple glob pattern in the test name   Andy Shevchenko
• [PATCH v2 3/4] test: Use positive conditional in test_matches()   Andy Shevchenko
• [PATCH v2 4/4] test: Don't unmount not (yet) mounted system   Andy Shevchenko
• [PATCH v2 1/4] test: Include /sbin to the PATH when creating ext4 disk image   Andy Shevchenko
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Ard Biesheuvel
• [PATCH v1 01/11] stdio: Get rid of dead code, i.e. stdio_deregister()   Andy Shevchenko
• [PATCH v1 02/11] stdio: Split out nulldev_register() and move it under #if   Andy Shevchenko
• [PATCH v1 03/11] stdio: Introduce a new helper stdio_file_to_flags()   Andy Shevchenko
• [PATCH v1 04/11] console: Switch to use stdio_file_to_flags()   Andy Shevchenko
• [PATCH v1 05/11] console: Set console device counter in console_devices_set()   Andy Shevchenko
• [PATCH v1 06/11] console: Set file and devices at one go   Andy Shevchenko
• [PATCH v1 07/11] IOMUX: Switch to use stdio_file_to_flags()   Andy Shevchenko
• [PATCH v1 08/11] IOMUX: Split out iomux_match_device() helper   Andy Shevchenko
• [PATCH v1 09/11] IOMUX: Split out for_each_console_dev() helper macro   Andy Shevchenko
• [PATCH v1 10/11] IOMUX: Introduce iomux_replace_device()   Andy Shevchenko
• [PATCH v1 11/11] usb: kbd: destroy device after console is stopped   Andy Shevchenko
• [PATCH v1] usb: kbd: destroy device after console is stopped   Andy Shevchenko
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Heinrich Schuchardt
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Ard Biesheuvel
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Igor Opaniuk
• [PATCH] net: gem: unregister mdio bus if probe fails   Ramon Fried
• Bug: filesystem btrfs: ls mmc 0:3   Georg Gast
• [PATCH] net: gem: unregister mdio bus if probe fails   Michal Simek
• [PATCH] net: gem: Fix error path in zynq_gem_probe   Michal Simek
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse T
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 14/25] arm: Remove sheevaplug board   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• Final of-platdata thing   Tom Rini
• [PATCH] serial: s5p: Allow independent selection   Mark Kettenis
• [PATCH] serial: s5p: Allow independent selection   Mark Kettenis
• [PATCH v3 0/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse
• [PATCH v3 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse
• [PATCH v3 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse T
• Boot problems imx8mp_evk   Peter Bergin
• [PATCHv5 1/6] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz, Foundries
• Boot problems imx8mp_evk   ZHIZHIKIN Andrey
• [PULL] u-boot-atmel-fixes-2021.04-a   Eugen.Hristev at microchip.com
• Boot problems imx8mp_evk   Peter Bergin
• [PATCH v3 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH v3 0/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH v3 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH] cmd: mmc: add mmc partboot   grygorii tertychnyi
• [PATCH] fpga: zynqpl: fix buffer alignment   Michal Simek
• [PATCH] ARM: stm32: Add USB host boot support   Marek Vasut
• [Uboot-stm32] [PATCH] usb: dwc2: change compatible st, stm32mp1-hsotg to st, stm32mp15-hsotg   Ahmad Fatoum
• [PATCH] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   Peter Bergin
• [PATCH] sunxi: support boot console on uart1 for sun8i   Tobias Schramm
• [RFC RESEND 1/2] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [PATCH] spi: zynqmp_gqspi: fix set_speed bug on multiple runs   Michal Simek
• [PATCH] fs: ext4: Add metadata checksums support   Fredrik Hallenberg
• [PATCH] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   ZHIZHIKIN Andrey
• Final of-platdata thing   Simon Glass
• Final of-platdata thing   Tom Rini
• [GIT] Pull request: u-boot-dfu (12.02.2021)   Lukasz Majewski
• Final of-platdata thing   Simon Glass
• [PATCH] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   Peter Bergin
• [PATCH] fs: ext4: Add metadata checksums support   Tom Rini
• [PULL] u-boot-atmel-fixes-2021.04-a   Tom Rini
• [PATCH v2] serial: s5p: Allow independent selection   Mark Kettenis
• [GIT] Pull request: u-boot-dfu (12.02.2021)   Marek Vasut
• [PATCH] clk: fix clk_get_rate() documentation   Sean Anderson
• [PATCH] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse T
• [PATCH 1/1] buildman: 'Thread' object has no attribute 'isAlive'   Simon Glass
• [PATCH] tools: fdtgrep: Use unsigned chars for arrays   Simon Glass
• [PATCHv5 4/6] doc: describe the scp03 command   Simon Glass
• [PATCHv5 5/6] sandbox: imply SCP03 and CMD_SCP03   Simon Glass
• [PATCHv5 6/6] test: py: add initial coverage for scp03 cmd   Simon Glass
• [PATCH v4 10/16] dm: gpio: Add a way to update flags   Simon Glass
• [PATCH] clk: fix clk_get_rate() documentation   Simon Glass
• [PATCH] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH] fs: ext4: Add metadata checksums support   Fredrik Hallenberg
• [PATCH 0/2] Fixes for BSD sed compatibility   Roger Pau Monne
• [PATCH 1/2] scripts/check-config.sh: fix to be compatible with BSD sed   Roger Pau Monne
• [PATCH 2/2] build/DTC: fix sed usage in DTC command   Roger Pau Monne
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [PATCH 0/3] arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7   Dario Binacchi
• [PATCH 1/3] arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7   Dario Binacchi
• [PATCH 2/3] am33xx: board: remove GPIO platforma data   Dario Binacchi
• [PATCH 3/3] dm: am33xx: drop GPIO domain clock enabling by SOC api   Dario Binacchi
• [PATCH] clk: ti: improve debug messages for clkctrl driver   Dario Binacchi
• [PATCH] arm: dts: sync am33xx-clocks with Linux 5.9-rc7   Dario Binacchi
• [PATCH 08/16] arm: Remove mx53loco board   Fabio Estevam
• [PATCH 06/25] arm: Remove mx28evk board   Fabio Estevam
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Roger Pau Monne
• [PATCH 08/16] arm: Remove mx53loco board   Tom Rini
• [PATCH 1/2] scripts/check-config.sh: fix to be compatible with BSD sed   Warner Losh
• [PATCH 2/2] build/DTC: fix sed usage in DTC command   Warner Losh
• [PATCH] sunxi: support boot console on uart1 for sun8i   Andre Przywara
• [PATCH] clk: fix clk_get_rate() documentation   Simon Glass
• [PATCH] sunxi: support boot console on uart1 for sun8i   Tobias Schramm
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Heiko Stuebner
• [PATCH] sunxi: support boot console on uart1 for sun8i   Andre Przywara
• qemu arm: increasing log-level causes exception   Zack Marvel
• [PATCH 1/4] imx53-qsb: Import devicetree files from Linux   Fabio Estevam
• [PATCH 2/4] mx53loco: Convert to driver model   Fabio Estevam
• [PATCH 3/4] ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin   Fabio Estevam
• [PATCH 4/4] mx53loco: Add myself as maintainer   Fabio Estevam
• [PATCH 08/16] arm: Remove mx53loco board   Fabio Estevam
• [PATCH] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH v2] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH v2 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH v2] clk: fix clk_get_rate() documentation   Jesse T
• [PATCH v2] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH v2] clk: fix clk_get_rate() documentation   Jesse T
• [PATCH v4 0/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse
• [PATCH v4 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Bin Meng
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Roger Pau Monné
• [PATCH v2] serial: s5p: Allow independent selection   Patrick Wildt
• [PATCH] fdt/sunxi: Remove OF_STDOUT_PATH   Andre Przywara
• Pull request for UEFI sub-system for efi-2021-04-rc2-2   Heinrich Schuchardt
• [PATCH] sunxi: Remove dead ifdefs in sunxi-common.h   Andre Przywara
• [RESEND PATCH 0/2] clk patches from 'Add DM support for omap PWM backlight' series   Dario Binacchi
• [RESEND PATCH 1/2] clk: remove a redundant header   Dario Binacchi
• [RESEND PATCH 2/2] arch: sandbox: fix typo in clk.h   Dario Binacchi
• [PATCH 2/4] mx53loco: Convert to driver model   Tom Rini
• [PATCH] fdt/sunxi: Remove OF_STDOUT_PATH   Tom Rini
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Marek Vasut
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Roger Pau Monné
• [PATCHv5 2/6] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCHv5 0/6] SCP03 control, documentation and tests.   Jorge Ramirez-Ortiz
• [PATCHv5 1/6] common: SCP03 control (enable and provision of keys)   Jorge Ramirez-Ortiz
• [PATCHv5 2/6] cmd: SCP03: enable and provision command   Jorge Ramirez-Ortiz
• [PATCHv5 3/6] drivers: tee: sandbox: SCP03 control emulator   Jorge Ramirez-Ortiz
• [PATCHv5 4/6] doc: describe the scp03 command   Jorge Ramirez-Ortiz
• [PATCHv5 5/6] sandbox: imply SCP03 and CMD_SCP03   Jorge Ramirez-Ortiz
• [PATCHv5 6/6] test: py: add initial coverage for scp03 cmd   Jorge Ramirez-Ortiz
• Pull request for UEFI sub-system for efi-2021-04-rc2-2   Tom Rini
• [PATCH] virtio: fix off by one device id comparison   Vincent Stehlé
• [PATCH 09/17] fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()   Peter Robinson
• [PATCH 2/4] mx53loco: Convert to driver model   Fabio Estevam
• [PATCH 09/17] fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()   Jesper Schmitz Mouridsen
• [PATCH 09/17] fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()   Tom Rini
• [PATCH 09/17] fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()   Tom Rini
• [PATCH] Revert "fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()"   Tom Rini
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Daniel Schwierzeck
• [PATCH] Revert "fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()"   Peter Robinson
• [PATCH v2] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   Peter Bergin
• [PATCH 09/17] fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()   Peter Robinson
• [PATCH] include: configs: rk3399: drop a dangling comment   Peter Robinson
• [PATCH] rockchip: rk3399: rock960: explicitly disable SPI flash   Peter Robinson
• [PATCH 09/17] fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()   Tom Rini
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Tom Rini
• [PATCH] cmd: mmc: add mmc partboot   Jaehoon Chung
• [PATCH 06/13] arm: goni: Disable CONFIG_REVISION_TAG   Jaehoon Chung
• [PATCH v2] sunxi: support boot console on uart1 for sun8i   Tobias Schramm
• [PATCH v4 0/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH v4 1/1] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [RFC RESEND 1/2] efi: Add ESRT to the EFI system table   AKASHI Takahiro
• [PATCH] vexpress64_fvp: Set DRAM to 4G to match with kernel devicetree   Diego Sueiro
• [PATCH v4 8/9] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v5] dm: core: Add of_match_node helper function   Biju Das
• [PATCH v2] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   ZHIZHIKIN Andrey
• [PATCH] configs: fsl: move via specific defines to Kconfig   Rajesh Bhagat
• [PATCH v3 0/5] clk: Add support to enable clocks   Michal Simek
• [PATCH v3 1/5] clk: zynq: Add dummy clock enable function   Michal Simek
• [PATCH v3 2/5] clk: zynqmp: Add support to enable clocks   Michal Simek
• [PATCH v3 3/5] clk: versal: Add support to enable clocks   Michal Simek
• [PATCH v3 4/5] i2c: i2c_cdns: Enable i2c clock   Michal Simek
• [PATCH v3 5/5] net: gem: Enable ethernet rx clock for versal   Michal Simek
• [PATCH] virtio: fix off by one device id comparison   Bin Meng
• [PATCH v2] sunxi: support boot console on uart1 for sun8i   Andre Przywara
• STM32MP157 boot from Recovery USB   gianluca
• [PATCH 1/4] mmc: fsl_esdhc_imx: Add a compatible for i.MX51   Fabio Estevam
• [PATCH 2/4] imx51-babbage: Import devicetree files from Linux   Fabio Estevam
• [PATCH 3/4] mx51evk: Convert to driver model   Fabio Estevam
• [PATCH 4/4] mx51evk: Add myself as maintainer   Fabio Estevam
• [PATCH] mmc: pci: Fix Kconfig dependency   Bin Meng
• [PATCH] cmd: mmc: add mmc partboot   gr embeter
• [PATCH 4/4] mx51evk: Add myself as maintainer   Tom Rini
• [PATCH 2/4] mx53loco: Convert to driver model   Tom Rini
• [PATCHv5 2/6] cmd: SCP03: enable and provision command   Igor Opaniuk
• [PATCHv5 2/6] cmd: SCP03: enable and provision command   Igor Opaniuk
• [BUG] [BISECT] rockchip: roc-pc-rk3399: TPL misses dtb   Markus Reichl
• old version of u-boot cannot read larger USB sticks   Floyd Brown
• [BUG] [BISECT] rockchip: roc-pc-rk3399: TPL misses dtb   Tom Rini
• old version of u-boot cannot read larger USB sticks   Tom Rini
• [PATCH] Revert "fdtdec: Use CONFIG_IS_ENABLED in board_fdt_blob_setup()"   Tom Rini
• [PATCH 07/25] arm: Remove apx4devkit board   Tom Rini
• [PATCH 10/25] arm: Remove mx35pdk board   Tom Rini
• [PATCH 18/25] arm: Remove ls2080a_simu board   Tom Rini
• [PATCH 24/25] arm: Remove db-88f6281-bp board   Tom Rini
• [PATCH 10/16] ppc: Remove MPC8544DS board   Tom Rini
• [PATCH 11/16] ppc: Remove MPC8572DS board   Tom Rini
• [PATCH 12/16] ppc: Remove MPC8610HPCD board   Tom Rini
• [PATCH 13/16] ppc: Remove MPC8641HPCN board   Tom Rini
• [PATCH 1/6] sh: Remove MigoR board   Tom Rini
• [PATCH 2/6] sh: Remove r7780mp board   Tom Rini
• [PATCH 3/6] sh: Remove sh7752evb board   Tom Rini
• [PATCH 4/6] sh: Remove sh7753evb board   Tom Rini
• [PATCH 5/6] sh: Remove sh7757lcr board   Tom Rini
• [PATCH 6/6] sh: Remove sh7763rdp board   Tom Rini
• [PATCHv2] common: Drop asm/global_data.h from common header   Tom Rini
• [PATCH] Azure: Rework SH / Renesas job   Tom Rini
• [PATCH 1/3] board: mediatek: rename pumpkin board into mt8516   Fabien Parent
• [PATCH 2/3] board: mediatek: mt8516: init USB Ether for pumpkin board   Fabien Parent
• [PATCH 3/3] configs: mt8516: use bootcmd from config_distro_bootcmd.h   Fabien Parent
• [PATCH 1/2] ARM: mediatek: Add MT8183 support   Fabien Parent
• [PATCH 2/2] board: Add MT8183 pumpkin board support   Fabien Parent
• [PATCH v5] dm: core: Add of_match_node helper function   Biju Das
• [PATCH V2] nvme: Fix cache alignment   Marek Vasut
• [PATCH v2 0/3] Add support for the GST ESPRESSOBin-Ultra board   Luka Kovacic
• [PATCH v2 1/3] cmd: mvebu: Implement the Marvell hw_info command   Luka Kovacic
• [PATCH v2 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH v2 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH] cmd: mmc: add mmc partboot   Jaehoon Chung
• [PATCH] mmc: pci: Fix Kconfig dependency   Jaehoon Chung
• [PATCH 0/8] vboot: Correct vulnerabilities identified by Intel   Simon Glass
• [PATCH 1/8] fdt_region: Check for a single root node of the correct name   Simon Glass
• [PATCH 2/8] fit: Don't allow verification of images with @ nodes   Simon Glass
• [PATCH 3/8] test: Add vboot_evil implementation   Simon Glass
• [PATCH 4/8] test: Add tests for the 'evil' vboot attacks   Simon Glass
• [PATCH 5/8] image: Adjust the workings of fit_check_format()   Simon Glass
• [PATCH 6/8] image: Add an option to do a full check of the FIT   Simon Glass
• [PATCH 7/8] libfdt: Check for multiple/invalid root nodes   Simon Glass
• [PATCH 8/8] image: Check for unit addresses in FITs   Simon Glass
• [PATCH V2] nvme: Fix cache alignment   Bin Meng
• [PATCH V2 0/5] Add mmc-pwrseq file to use common function   Jaehoon Chung
• [PATCH V2 1/5] mmc: pwrseq: add mmc-pwrseq file to provide a generic interface   Jaehoon Chung
• [PATCH V2 2/5] mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq   Jaehoon Chung
• [PATCH V2 3/5] mmc: rockchip_dw_mmc: use mmc_pwrseq instead of rockchip_mmc_pwrseq   Jaehoon Chung
• [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config   Jaehoon Chung
• [PATCH V2 5/5] configs: enable CONFIG_MMC_PWRSEQ configuration   Jaehoon Chung
• [PATCH v2 1/3] cmd: mvebu: Implement the Marvell hw_info command   Tom Rini
• [PATCH 1/8] fdt_region: Check for a single root node of the correct name   Tom Rini
• [PATCH 2/8] fit: Don't allow verification of images with @ nodes   Tom Rini
• [PATCH 3/8] test: Add vboot_evil implementation   Tom Rini
• [PATCH 4/8] test: Add tests for the 'evil' vboot attacks   Tom Rini
• [PATCH 5/8] image: Adjust the workings of fit_check_format()   Tom Rini
• [PATCH 6/8] image: Add an option to do a full check of the FIT   Tom Rini
• [PATCH 7/8] libfdt: Check for multiple/invalid root nodes   Tom Rini
• [PATCH 8/8] image: Check for unit addresses in FITs   Tom Rini
• [ANN] U-Boot v2021.04-rc2 released   Tom Rini
• [PATCH v2 1/1] Allow last block to be read   Heinrich Schuchardt
• [PATCH] cmd: mmc: add mmc partboot   gr embeter
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Lukasz Majewski
• [PATCH] sunxi: Use kconfig instead define CONFIG_I2C_EDID   Игорь Юрасов
• [PATCH] cmd: mmc: add mmc partboot   Jaehoon Chung
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [PATCH v10 02/11] efi_loader: capsule: add capsule_on_disk support   Heinrich Schuchardt
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [PATCH v10 02/11] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH v3] mmc: mmc_spi: Print verbose debug output when crc16 check fails   Bin Meng
• [PATCH] imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit.   Adam Ford
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Tom Rini
• [PATCH] lib: rsa: Add debug message on algo mismatch   Sean Anderson
• [PATCH] lib: rsa: Add debug message on algo mismatch   Wolfgang Denk
• [PATCH] lib: rsa: Add debug message on algo mismatch   Sean Anderson
• Chromium OS verified boot 2018 with U-Boot   Simon Glass
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Patrice CHOTARD
• [PATCH 1/1] doc: Add reference to U-Boot project in conf.py   Heinrich Schuchardt
• Chromium OS verified boot 2018 with U-Boot   Heinrich Schuchardt
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Tom Rini
• [PATCH v5] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse
• [PATCH 1/2] configs: BPI-R2: Disable EFI Grub workaround   matthias.bgg at kernel.org
• [PATCH 2/2] configs: RPi2: Disable EFI Grub workaround   matthias.bgg at kernel.org
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Vladimir Oltean
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Tom Rini
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Marek Vasut
• [PATCH v5 0/9] Introduce DSA Ethernet switch class and Felix driver   Vladimir Oltean
• [PATCH v5 1/9] net: phy: fixed: be compatible with live OF tree   Vladimir Oltean
• [PATCH v5 2/9] net: phy: fixed: support speeds of 2500 and 10000   Vladimir Oltean
• [PATCH v5 3/9] net: phy: introduce fixed_phy_create for DSA CPU ports   Vladimir Oltean
• [PATCH v5 4/9] net: mdio: teach dm_eth_connect_phy_handle to connect to fixed PHY   Vladimir Oltean
• [PATCH v5 5/9] net: introduce DSA class for Ethernet switches   Vladimir Oltean
• [PATCH v5 6/9] sandbox: add a DSA sandbox driver and unit test   Vladimir Oltean
• [PATCH v5 7/9] drivers: net: add Felix DSA switch driver   Vladimir Oltean
• [PATCH v5 8/9] arm: dts: ls1028a: add Ethernet switch node and dependencies   Vladimir Oltean
• [PATCH v5 9/9] configs: ls1028a: enable the Ethernet switch driver   Vladimir Oltean
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Vladimir Oltean
• [PATCH v5 4/9] net: mdio: teach dm_eth_connect_phy_handle to connect to fixed PHY   Vladimir Oltean
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Michael Walle
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Tom Rini
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Vladimir Oltean
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Tom Rini
• [PATCH v4 1/7] net: phy: fixed: support speeds of 2500 and 10000   Tom Rini
• [PATCH v4 2/7] net: phy: introduce fixed_phy_create for DSA CPU ports   Tom Rini
• [PATCH v4 3/7] net: Introduce DSA class for Ethernet switches   Tom Rini
• [PATCH v4 5/7] drivers: net: Add Felix DSA switch driver   Tom Rini
• [PATCH v4 6/7] arm: dts: ls1028a: Add Ethernet switch node and dependencies   Tom Rini
• [PATCH v4 7/7] configs: ls1028a: Enable the Ethernet switch driver in defconfig   Tom Rini
• [PATCH v8 1/4] drivers: tee: i2c trampoline driver   Tom Rini
• [PATCH v8 2/4] test: py: add pygit2 and pyelftools to requirements.txt   Tom Rini
• [PATCH v8 3/4] drivers: tee: sandbox: add rpc test ta emulation   Tom Rini
• [PATCH v8 4/4] test: dm: tee: extend with RPC test   Tom Rini
• [PATCH v1 01/11] stdio: Get rid of dead code, i.e. stdio_deregister()   Tom Rini
• [PATCH v1 02/11] stdio: Split out nulldev_register() and move it under #if   Tom Rini
• [PATCH v1 03/11] stdio: Introduce a new helper stdio_file_to_flags()   Tom Rini
• [PATCH v1 04/11] console: Switch to use stdio_file_to_flags()   Tom Rini
• [PATCH v1 05/11] console: Set console device counter in console_devices_set()   Tom Rini
• [PATCH v1 06/11] console: Set file and devices at one go   Tom Rini
• [PATCH v1 07/11] IOMUX: Switch to use stdio_file_to_flags()   Tom Rini
• [PATCH v1 08/11] IOMUX: Split out iomux_match_device() helper   Tom Rini
• [PATCH v1 09/11] IOMUX: Split out for_each_console_dev() helper macro   Tom Rini
• [PATCH v1 10/11] IOMUX: Introduce iomux_replace_device()   Tom Rini
• [PATCH v1 11/11] usb: kbd: destroy device after console is stopped   Tom Rini
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Michael Walle
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Michael Walle
• [PATCH v4 4/7] sandbox: Add a DSA sandbox driver and unit test   Vladimir Oltean
• [PATCH] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH 1/4] mmc: fsl_esdhc_imx: Add a compatible for i.MX51   Jaehoon Chung
• [PATCH 0/4] Sandbox driver for DSA uclass   Vladimir Oltean
• [PATCH 1/4] net: phy: fixed: be compatible with live OF tree   Vladimir Oltean
• [PATCH 2/4] net: phy: drop #ifdef CONFIG_DM_ETH around phy_connect_fixed   Vladimir Oltean
• [PATCH 3/4] net: mdio: teach dm_eth_phy_connect to connect to fixed PHY   Vladimir Oltean
• [PATCH 4/4] sandbox: add a DSA sandbox driver and unit test   Vladimir Oltean
• [PATCH] board: sl28: add DSA support for variant 2   Vladimir Oltean
• [PATCH] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH] board: sl28: add DSA support for variant 2   Vladimir Oltean
• [PATCH] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Heiko Stuebner
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Tom Rini
• [PATCH] lib: rsa: Add debug message on algo mismatch   Simon Glass
• [PATCH 1/1] doc: Add reference to U-Boot project in conf.py   Simon Glass
• [PATCH 1/1] doc: Add reference to U-Boot project in conf.py   Bin Meng
• [PATCH 0/3] Improvements to FIT hashing   Joel Stanley
• [PATCH 1/3] hw_sha: Fix coding style errors   Joel Stanley
• [PATCH 2/3] fit: Use hash.c to call SHA code   Joel Stanley
• [PATCH 3/3] hash: Allow for SHA512 hardware implementations   Joel Stanley
• [PATCH 2/3] fit: Use hash.c to call SHA code   AKASHI Takahiro
• [PATCH 1/2] efi: Add ESRT to the EFI system table   AKASHI Takahiro
• [PATCH 2/2] efi: ESRT cration unit test   AKASHI Takahiro
• About doc/usage directory   Jaehoon Chung
• About doc/usage directory   Heinrich Schuchardt
• [PATCH 1/1] doc/README.distro: kernel_comp_addr_r   Heinrich Schuchardt
• [PATCH] arm64: zynqmp: Rename zc1275/zcu1275 to be aligned with DT name   Michal Simek
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Patrice CHOTARD
• [PATCH] test: cmd: setexpr: Fix a typo   Bin Meng
• [PATCH v5] net: tftp: Add client support for RFC 7440   Oliver Graute
• [PATCH v2] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start() and usb_gadget_register_driver()   Patrice Chotard
• [PATCH] test: print_ut: Fix potential build error   Bin Meng
• [PATCH 07/16] arm: Remove ot1200 board   Christian Gmeiner
• [PATCH v5] net: tftp: Add client support for RFC 7440   Oliver Graute
• [PATCH] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start()   Marek Vasut
• [PATCH v2] net: tftp: Avoid sending extra ack on completion   Oliver Graute
• [PATCH] patman: Use less for help file, if available   Nicolas Boichat
• [PATCH 1/1] lib: rsa: struct udevice build warning   Heinrich Schuchardt
• [PATCH] bootm: do not hang on failure   Heinrich Schuchardt
• [PATCH 1/1] test: missing dependency for test/cmd/setexpr.c   Heinrich Schuchardt
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Heiko Stuebner
• [PATCH 5/8] image: Adjust the workings of fit_check_format()   Jesper Schmitz Mouridsen
• [PATCH 5/8] image: Adjust the workings of fit_check_format()   Tom Rini
• [PATCH 5/8] image: Adjust the workings of fit_check_format()   Jesper Schmitz Mouridsen
• [PATCH] mips: mtmips: Kconfig: select options used in SPL   Du Huanpeng
• [PATCH] cmd: mmc: add mmc partboot   gr embeter
• sunxi/pinephone suggestions and fixes   Nicolas Boulenguez
• [PATCH v2] cmd: mmc: add mmc bootpart-check   grygorii tertychnyi
• [PATCH 1/1] doc: booti man-page   Heinrich Schuchardt
• [PATCH] Tegra: remove e2220-1170 board   Peter Robinson
• [PATCH] Tegra: remove e2220-1170 board   Stephen Warren
• [PATCH V2] nvme: Fix cache alignment   Marek Vasut
• [PATCH 16/25] arm: Remove gwventana boards   Tim Harvey
• [PATCH 16/25] arm: Remove gwventana boards   Tom Rini
• About doc/usage directory   Jaehoon Chung
• [PATCH v5 6/6] test/py: ecdsa: Add test for mkimage ECDSA signing   Tom Rini
• [PATCH v2] cmd: mmc: add mmc bootpart-check   Jaehoon Chung
• Converting imx28-evk to DM   Fabio Estevam
• [PATCH v5 6/6] test/py: ecdsa: Add test for mkimage ECDSA signing   Alex G.
• Converting imx28-evk to DM   Fabio Estevam
• [PATCH] common: splash_source: fix -Wint-to-pointer-cast warning   Jaehoon Chung
• [PATCH] mmc: initialize an err variable   Jaehoon Chung
• [PATCH V2] cmd: mmc: update the mmc command's usage about argument   Jaehoon Chung
• [PATCH v5 6/6] test/py: ecdsa: Add test for mkimage ECDSA signing   Tom Rini
• [PATCH 01/26] Revert "pci: pci-uclass: Dynamically allocate the PCI regions"   Bin Meng
• [PATCH 1/2] imx28-evk: Import devicetree file from Linux   Fabio Estevam
• [PATCH 2/2] mx28evk: Convert to driver model   Fabio Estevam
• [PATCH 02/25] arm: Remove mx23evk board   Fabio Estevam
• [PATCH v6 2/5] button: add a simple Analog to Digital Converter device based button driver   Simon Glass
• [PATCH v6 5/5] test: add a simple test for the adc-keys button driver   Simon Glass
• [PATCH v2 1/4] test: Include /sbin to the PATH when creating ext4 disk image   Simon Glass
• [PATCH v2 2/4] test: Allow simple glob pattern in the test name   Simon Glass
• [PATCH v2 3/4] test: Use positive conditional in test_matches()   Simon Glass
• [PATCH v2 4/4] test: Don't unmount not (yet) mounted system   Simon Glass
• [PATCH 1/2] scripts/check-config.sh: fix to be compatible with BSD sed   Simon Glass
• [PATCH] fdt/sunxi: Remove OF_STDOUT_PATH   Simon Glass
• [PATCH] test: print_ut: Fix potential build error   Simon Glass
• [PATCH] patman: Use less for help file, if available   Simon Glass
• [PATCH] bootm: do not hang on failure   Simon Glass
• Chromium OS verified boot 2018 with U-Boot   Simon Glass
• [BUG] [BISECT] rockchip: roc-pc-rk3399: TPL misses dtb   Simon Glass
• [PATCH] test: cmd: setexpr: Fix a typo   Simon Glass
• Query on kernel parameter to set sata ata link speed   SIMON BABY
• [PATCH v2] net: tftp: Avoid sending extra ack on completion   Ramon Fried
• [PATCH v2 1/1] timer: dw-apb: fix compiler warnings   Heinrich Schuchardt
• [PATCH 4/5] log: convert pr_*() to logging   Heinrich Schuchardt
• [PATCH v6 5/5] test: add a simple test for the adc-keys button driver   Neil Armstrong
• [PATCH v7 0/5] VIM3: add support for checking 'Function' button state   Marek Szyprowski
• [PATCH v7 1/5] dt-bindings: input: adc-keys bindings documentation   Marek Szyprowski
• [PATCH v7 2/5] button: add a simple Analog to Digital Converter device based button driver   Marek Szyprowski
• [PATCH v7 3/5] adc: meson-saradc: add support for getting reference voltage value   Marek Szyprowski
• [PATCH v7 4/5] configs: khadas-vim3(l): enable Function button support   Marek Szyprowski
• [PATCH v7 5/5] test: add a simple test for the adc-keys button driver   Marek Szyprowski
• [PATCH v7 0/5] VIM3: add support for checking 'Function' button state   Neil Armstrong
• [PATCH v2 4/4] test: Don't unmount not (yet) mounted system   Andy Shevchenko
• [PATCH 1/1] sandbox: enable cros-ec-keyb in test.dtb   Heinrich Schuchardt
• [PATCH 1/3] firmware: scmi: voltage regulator   Etienne Carriere
• [PATCH 2/3] firmware: scmi: sandbox test for voltage regulator   Etienne Carriere
• [PATCH 3/3] firmware: scmi: fix inline comments and minor coding style issues   Etienne Carriere
• [GIT PULL] rpi: updates for v2021.04   Matthias Brugger
• [BUG] [BISECT] rockchip: roc-pc-rk3399: TPL misses dtb   Tom Rini
• [PATCH 4/5] log: convert pr_*() to logging   Tom Rini
• [PATCH 00/10] Add support for extension boards detection and DT overlays application   Kory Maincent
• [PATCH 01/10] fdt_support: move fdt_valid from cmd_fdt.c to fdt_support.c   Kory Maincent
• [PATCH 02/10] cmd: add support for a new "extension" command   Kory Maincent
• [PATCH 03/10] pytest: add sandbox test for "extension" command   Kory Maincent
• [PATCH 04/10] ti/common: add support for extension_scan_board function   Kory Maincent
• [PATCH 05/10] am57xx: add support for cape detect functionality   Kory Maincent
• [PATCH 06/10] arm: dts: sun5i: enable one-wire on the CHIP   Kory Maincent
• [PATCH 07/10] arm: mach-sunxi: add CHIP board target   Kory Maincent
• [PATCH 08/10] sun5i: add support for DIP detection to CHIP board   Kory Maincent
• [PATCH 09/10] arm: am335x: add support for i2c2 bus   Kory Maincent
• [PATCH 10/10] am335x: add support for cape detect functionality   Kory Maincent
• [PATCH 4/5] log: convert pr_*() to logging   Patrice CHOTARD
• [PATCH v7 0/5] VIM3: add support for checking 'Function' button state   Neil Armstrong
• [PATCH v7 0/5] VIM3: add support for checking 'Function' button state   Heinrich Schuchardt
• [PATCH v2 00/38] ppc: qemu: Convert qemu-ppce500 to driver model and enable additional driver support   Bin Meng
• [PATCH v2 01/38] pci: fsl_pci_init: Dynamically allocate the PCI regions   Bin Meng
• [PATCH v2 02/38] ppc: qemu: Update MAINTAINERS for correct email address   Bin Meng
• [PATCH v2 03/38] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Bin Meng
• [PATCH v2 04/38] ppc: qemu: Support non-identity PCI bus address   Bin Meng
• [PATCH v2 05/38] ppc: qemu: Fix CONFIG_SYS_PCI_MAP_END   Bin Meng
• [PATCH v2 06/38] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Bin Meng
• [PATCH v2 07/38] ppc: qemu: Drop init_laws() and print_laws()   Bin Meng
• [PATCH v2 08/38] ppc: qemu: Drop board_early_init_f()   Bin Meng
• [PATCH v2 09/38] ppc: qemu: Enable OF_CONTROL   Bin Meng
• [PATCH v2 10/38] ppc: qemu: Enable driver model   Bin Meng
• [PATCH v2 11/38] include: Remove extern from addr_map.h   Bin Meng
• [PATCH v2 12/38] lib: addr_map: Move address_map[] type to the header file   Bin Meng
• [PATCH v2 13/38] cmd: Add a command to display the address map   Bin Meng
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Bin Meng
• [PATCH v2 15/38] lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help   Bin Meng
• [PATCH v2 16/38] ppc: io.h: Use addrmap_ translation APIs only in post-relocation phase   Bin Meng
• [PATCH v2 17/38] common: Move initr_addr_map() to a bit earlier   Bin Meng
• [PATCH v2 18/38] ppc: qemu: Switch over to use DM serial   Bin Meng
• [PATCH v2 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Bin Meng
• [PATCH v2 20/38] pci: mpc85xx: Support controller register physical address beyond 32-bit   Bin Meng
• [PATCH v2 21/38] pci: mpc85xx: Support 64-bit bus and cpu address   Bin Meng
• [PATCH v2 22/38] ppc: qemu: Switch over to use DM ETH and PCI   Bin Meng
• [PATCH v2 23/38] ppc: qemu: Drop CONFIG_OF_BOARD_SETUP   Bin Meng
• [PATCH v2 24/38] cmd: Fix virtio command dependency   Bin Meng
• [PATCH v2 25/38] ppc: qemu: Enable VirtIO NET support   Bin Meng
• [PATCH v2 26/38] virtio: Fix VirtIO BLK driver dependency   Bin Meng
• [PATCH v2 27/38] ppc: qemu: Enable VirtIO BLK support   Bin Meng
• [PATCH v2 28/38] ppc: mpc85xx: Add 'gpibe' register to 'struct ccsr_gpio'   Bin Meng
• [PATCH v2 29/38] gpio: mpc8xxx: Support controller register physical address beyond 32-bit   Bin Meng
• [PATCH v2 30/38] ppc: qemu: Enable GPIO support   Bin Meng
• [PATCH v2 31/38] dm: sysreset: Add a Kconfig option for the 'reset' command   Bin Meng
• [PATCH v2 32/38] ppc: qemu: Enable support for power off via GPIO   Bin Meng
• [PATCH v2 33/38] ppc: qemu: Enable RTC support via I2C   Bin Meng
• [PATCH v2 34/38] ppc: qemu: Delete the temporary FDT virtual-physical mapping after U-Boot is relocated   Bin Meng
• [PATCH v2 35/38] ppc: qemu: Drop a custom env variable 'fdt_addr_r'   Bin Meng
• [PATCH v2 36/38] ppc: qemu: Drop fixed_sdram()   Bin Meng
• [PATCH v2 37/38] ppc: qemu: Move board directory from board/freescale to board/emulation   Bin Meng
• [PATCH v2 38/38] doc: Add a reST document for qemu-ppce500   Bin Meng
• [PATCH] fdt/sunxi: Remove OF_STDOUT_PATH   Andre Przywara
• [GIT PULL] rpi: updates for v2021.04   Tom Rini
• [PATCH v2] net: tftp: Avoid sending extra ack on completion   Tom Rini
• [PATCH 0/2] efi_loader: multi part device paths to text   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: multi part device paths to text   Heinrich Schuchardt
• [PATCH 2/2] efi_selftest: multi part device path to text   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: compiler flags for dtbdump.o   Heinrich Schuchardt
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat   Peter Robinson
• [PATCH] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat   Heinrich Schuchardt
• [PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat   Peter Robinson
• [PATCH] pwm: sunxi: enable pwm0 support on sun7i   Giulio Benetti
• [PATCH 0/5] Add Micronova srl S027_3 board support   Giulio Benetti
• [PATCH 1/5] arm: allwinner: dts: a20: add uart2_pa_pins   Giulio Benetti
• [PATCH 2/5] sunxi: allow SYS_BOARD to be set   Giulio Benetti
• [PATCH 3/5] sunxi: add SYS_VENDOR to Kconfig   Giulio Benetti
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Giulio Benetti
• [PATCH 5/5] pwm: sunxi: enable pwm0 support on sun7i   Giulio Benetti
• [PATCH 1/3] mx28-evk: Import devicetree file from Linux   Fabio Estevam
• [PATCH 2/3] mx28evk: Convert to driver model   Fabio Estevam
• [PATCH 3/3] mx23evk: Add myself as maintainer   Fabio Estevam
• [PATCH 0/5] Add Micronova srl S027_3 board support   Giulio Benetti
• [PATCH v2 1/3] mx23-evk: Import devicetree file from Linux   Fabio Estevam
• [PATCH v2 2/3] mx23evk: Convert to driver model   Fabio Estevam
• [PATCH v2 3/3] mx23evk: Add myself as maintainer   Fabio Estevam
• [PATCH] rockchip: rk3399-puma: Restore correct VDD_LOG supply.   Christoph Muellner
• [PATCH] rockchip: rk3399-puma: Increase environment size to 16 kiB.   Christoph Muellner
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [PATCH 0/1] Add preliminary support for QFW on Arm   Asherah Connor
• [PATCH 1/1] arm: qemu: support qfw   Asherah Connor
• [PATCH v2 00/38] ppc: qemu: Convert qemu-ppce500 to driver model and enable additional driver support   Bin Meng
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Andre Przywara
• [PATCH v5 00/10] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v5 01/10] mtd: spi-nor: Add Cypress manufacturer ID   tkuw584924 at gmail.com
• [PATCH v5 02/10] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v5 03/10] mtd: spi-nor-core: Add support for Read/Write Any Register   tkuw584924 at gmail.com
• [PATCH v5 04/10] mtd: spi-nor-core: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v5 05/10] mtd: spi-nor-core: Add the ->ready() hook   tkuw584924 at gmail.com
• [PATCH v5 06/10] mtd: spi-nor-core: Read status by Read Any Register   tkuw584924 at gmail.com
• [PATCH v5 07/10] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   tkuw584924 at gmail.com
• [PATCH v5 08/10] mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte   tkuw584924 at gmail.com
• [PATCH v5 09/10] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v5 10/10] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH] arm: include: secure: Don't include asm\global_data.h in .S file   Siew Chin Lim
• [PATCH] lib: sha512: include "compiler.h"   Siew Chin Lim
• [PATCH 1/1] sandbox: enable cros-ec-keyb in test.dtb   Simon Glass
• [PATCH v2 4/4] test: Don't unmount not (yet) mounted system   Simon Glass
• [PATCH 1/1] lib: rsa: struct udevice build warning   Simon Glass
• [PATCH 1/1] test: missing dependency for test/cmd/setexpr.c   Simon Glass
• [PATCH 1/1] doc: booti man-page   Simon Glass
• [PATCH 3/3] firmware: scmi: fix inline comments and minor coding style issues   Simon Glass
• [PATCH] fdt/sunxi: Remove OF_STDOUT_PATH   Simon Glass
• [PATCH 0/1] Add preliminary support for QFW on Arm   Heinrich Schuchardt
• [PATCH 1/1] test: missing dependency for test/cmd/setexpr.c   Heinrich Schuchardt
• [PATCH] Makefile: Add target to generate hex output for combined spl and dtb   Siew Chin Lim
• [PATCH 1/1] arm: qemu: support qfw   Heinrich Schuchardt
• [PATCH 3/3] firmware: scmi: fix inline comments and minor coding style issues   Etienne Carriere
• [PATCH] arm: dts: imx8mp-evk: Add FEC PHY reset timing   Ye Li
• Please pull mmc-2021-2-19   Peng Fan (OSS)
• [PATCH 1/9] net: eqos: Add PHY reset control for i.MX platform   Ye Li
• [PATCH 2/9] arm: mach-imx: Update MAC fuse for i.MX8MP   Ye Li
• [PATCH 3/9] arm: mach-imx: Allow to build mac.c for EQoS driver   Ye Li
• [PATCH 4/9] arm: dts: imx8mp: Add EQoS controller node   Ye Li
• [PATCH 5/9] arm: dts: imx8mp-evk: Enable the EQoS ethernet port   Ye Li
• [PATCH 6/9] imx8mp_evk: Fix incorrect cascade for FEC and EQOS setup   Ye Li
• [PATCH 7/9] imx8mp_evk: Remove EQoS PHY reset codes   Ye Li
• [PATCH 8/9] imx8mp_evk: Delete noncached memory config   Ye Li
• [PATCH 9/9] imx8mp_evk: Enable the DWC EQoS iMX driver   Ye Li
• [PATCH] arm: dts: imx7d-sdb: Fix enet by setting soft spi mode to 3 for extended io   Christian Bräuner Sørensen
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Stefan Roese
• [PATCH] button: add udevice forward declaration   Neil Armstrong
• [PATCH v2] imx: support i.MX8QM DMSSE20 a1 board   Oliver Graute
• Can’t boot FIT kernel image   Алексей Беляев
• [PATCH 1/6] samsung: goni: change maintainer   Minkyu Kang
• [PATCH 2/6] samsung: smdk5250: change maintainer   Minkyu Kang
• [PATCH 3/6] samsung: smdk5420: change maintainer   Minkyu Kang
• [PATCH 4/6] samsung: smdkv310: change maintainer   Minkyu Kang
• [PATCH 5/6] samsung: espresso7420: change maintainer   Minkyu Kang
• [PATCH 6/6] samsung: origen: change maintainer   Minkyu Kang
• [PATCH v1] arm: imx8: added usbphy_regs struct   Oliver Graute
• [PATCH v1] arm: imx8: added usbphy_regs struct   Peng Fan (OSS)
• [PATCH v5 02/10] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH v5 05/10] mtd: spi-nor-core: Add the ->ready() hook   Pratyush Yadav
• [PATCH v5 06/10] mtd: spi-nor-core: Read status by Read Any Register   Pratyush Yadav
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Giulio Benetti
• [PATCH 1/2] efi_loader: multi part device paths to text   Ilias Apalodimas
• [PATCH] rockchip: rk3399-puma: Restore correct VDD_LOG supply.   Heiko Stuebner
• [PATCH 2/2] efi_selftest: multi part device path to text   Ilias Apalodimas
• [PATCH] rockchip: rk3399-puma: Increase environment size to 16 kiB.   Heiko Stuebner
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Giulio Benetti
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   gianluca
• [PATCH 1/5] arm: allwinner: dts: a20: add uart2_pa_pins   Andre Przywara
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Giulio Benetti
• [PATCH 5/5] pwm: sunxi: enable pwm0 support on sun7i   Andre Przywara
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Andre Przywara
• [PATCH 1/5] arm: allwinner: dts: a20: add uart2_pa_pins   Giulio Benetti
• [PATCH 1/2] efi_loader: multi part device paths to text   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: multi part device paths to text   Ilias Apalodimas
• [PATCH 01/14] board: corenet_ds: MAINTAINERS: Remove redundant entries   Priyanka Jain
• [PATCH 02/14] board: ls1012afrdm: Update MAINTAINERS   Priyanka Jain
• [PATCH 03/14] board: ls1012ardb: Update MAINTAINERS   Priyanka Jain
• [PATCH 04/14] board: ls1021aiot: Update MAINTAINERS   Priyanka Jain
• [PATCH 05/14] board: ls1021atwr: Update MAINTAINERS   Priyanka Jain
• [PATCH 06/14] board: ls1028a: Update MAINTAINERS   Priyanka Jain
• [PATCH 07/14] board: ls1043ardb: Update MAINTAINERS   Priyanka Jain
• [PATCH 08/14] board: ls1088a: Update MAINTAINERS   Priyanka Jain
• [PATCH 09/14] board: ls2080aqds: Update MAINTAINERS   Priyanka Jain
• [PATCH 10/14] board: ls2080ardb: Update MAINTAINERS   Priyanka Jain
• [PATCH 11/14] board: ls1046aqds: Update MAINTAINERS   Priyanka Jain
• [PATCH 12/14] board: ls1046ardb: Update MAINTAINERS   Priyanka Jain
• [PATCH 13/14] board: lx2160a: Update MAINTAINERS   Priyanka Jain
• [PATCH 14/14] board: ls1012aqds: Update MAINTAINERS   Priyanka Jain
• [PATCH] sunxi: Use kconfig instead define CONFIG_I2C_EDID   André Przywara
• [PATCH v5] imx: support for conga-QMX8 board   Oliver Graute
• [PATCH 1/2] clk: imx8mp Enable SPI clock   Arendt, Steffen
• [PATCH 2/2] clk: imx8mp Enable EQOS clock   Arendt, Steffen
• sunxi/pinephone suggestions and fixes   André Przywara
• [PATCH] mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support   Stefan Roese
• [PATCH 05/16] arm: Remove highbank board   André Przywara
• [Uboot-stm32] [PATCH] usb: dwc2: change compatible st, stm32mp1-hsotg to st, stm32mp15-hsotg   Patrick DELAUNAY
• [PATCH 05/16] arm: Remove highbank board   Tom Rini
• [PATCH v2 1/3] firmware: scmi: voltage regulator   Etienne Carriere
• [PATCH v2 2/3] firmware: scmi: sandbox test for voltage regulator   Etienne Carriere
• [PATCH v2 3/3] firmware: scmi: fix inline comments and minor coding style issues   Etienne Carriere
• [PATCH] arm: dts: imx7d-sdb: Fix enet by setting soft spi mode to 3 for extended io   Fabio Estevam
• USB3 XHCI crashing with USB 3 hub on Octeon   Aaron Williams
• [PATCH btrfs-progs] btrfs-progs: do not fail when offset of a ROOT_ITEM is not -1   David Sterba
• Re: Can’t boot FIT kernel image   Sean Anderson
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Giulio Benetti
• [PATCH u-boot-marvell v2 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behún
• [PATCH u-boot-marvell v2 01/18] ddr: marvell: a38x: fix write leveling suplementary algo   Marek Behún
• [PATCH u-boot-marvell v2 02/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell v2 03/18] ddr: marvell: a38x: add ddr32 support   Marek Behún
• [PATCH u-boot-marvell v2 04/18] ddr: marvell: a38x: add ddr 32bit ECC support   Marek Behún
• [PATCH u-boot-marvell v2 05/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell v2 06/18] ddr: marvell: a38x: fix 32bit   Marek Behún
• [PATCH u-boot-marvell v2 07/18] ddr: marvell: a38x: fix memory size calculation using 32bit bus width   Marek Behún
• [PATCH u-boot-marvell v2 08/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell v2 09/18] ddr: marvell: a38x: allow board specific ODT configuration   Marek Behún
• [PATCH u-boot-marvell v2 10/18] ddr: marvell: a38x: add 16Gbit memory devices support   Marek Behún
• [PATCH u-boot-marvell v2 11/18] ddr: marvell: a38x: add support for twin-die combined memory device   Marek Behún
• [PATCH u-boot-marvell v2 12/18] ddr: marvell: a38x: disable WL phase correction stage in case of bus_width=16bit   Marek Behún
• [PATCH u-boot-marvell v2 13/18] ddr: marvell: a38x: import header change from upstream   Marek Behún
• [PATCH u-boot-marvell v2 14/18] ddr: marvell: a38x: fix memory cs size function   Marek Behún
• [PATCH u-boot-marvell v2 15/18] ddr: marvell: a38x: import code change from upstream   Marek Behún
• [PATCH u-boot-marvell v2 16/18] ddr: marvell: a38x: enum mv_ddr_twin_die: change order   Marek Behún
• [PATCH u-boot-marvell v2 17/18] ddr: marvell: a38x: bump version to 14.0.0   Marek Behún
• [PATCH u-boot-marvell v2 18/18] ddr: marvell: a38x: fix comment in conditional macro   Marek Behún
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behún
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Stefan Roese
• [PATCH 01/10] fdt_support: move fdt_valid from cmd_fdt.c to fdt_support.c   Tom Rini
• [PATCH 02/10] cmd: add support for a new "extension" command   Tom Rini
• [PATCH 06/10] arm: dts: sun5i: enable one-wire on the CHIP   Tom Rini
• [PATCH 07/10] arm: mach-sunxi: add CHIP board target   Tom Rini
• [PATCH 08/10] sun5i: add support for DIP detection to CHIP board   Tom Rini
• [PATCH 10/10] am335x: add support for cape detect functionality   Tom Rini
• [PATCH v4 1/8] spl: fit: Drop 'length' argument to board_spl_fit_post_load()   Tom Rini
• [PATCH v4 2/8] spl: fit: Factor out FIT parsing and use a context struct   Tom Rini
• [PATCH v4 3/8] spl: fit: Pass FIT context via a structure pointer   Tom Rini
• [PATCH v4 4/8] spl: fit: Remove useless loop in spl_fit_get_image_name()   Tom Rini
• [PATCH v4 5/8] spl: fit: Only look up FIT configuration node once   Tom Rini
• [PATCH v4 6/8] image: Do not #if guard board_fit_image_post_process() prototype   Tom Rini
• [PATCH v4 7/8] spl: fit: Replace #ifdef blocks with more readable constructs   Tom Rini
• [PATCH v4 8/8] spl: fit: Load devicetree when a Linux payload is found   Tom Rini
• [PATCH u-boot-marvell 1/4] rtc: add armada38x driver   Marek Behún
• [PATCH u-boot-marvell 0/5] pci_mvebu changes   Marek Behún
• [PATCH 08/10] sun5i: add support for DIP detection to CHIP board   Andre Przywara
• [PATCH] sunxi: board: Splitting CHIP defconfig for nand.   André Przywara
• [PATCHv2 0/2] Add ESRT and test ESRT creation   Jose Marinho
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Jose Marinho
• [PATCH 2/2] efi: ESRT creation tests   Jose Marinho
• Frustrations of running testing   Alex G.
• RAM test Uboot   Fariya F
• [PATCH v6 00/11] Add support for ECDSA image signing   Alexandru Gagniuc
• [PATCH v6 01/11] lib: Rename rsa-checksum.c to hash-checksum.c   Alexandru Gagniuc
• [PATCH v6 02/11] lib/rsa: Make fdt_add_bignum() available outside of RSA code   Alexandru Gagniuc
• [PATCH v6 03/11] lib: Add support for ECDSA image signing   Alexandru Gagniuc
• [PATCH v6 04/11] doc: signature.txt: Document devicetree format for ECDSA keys   Alexandru Gagniuc
• [PATCH v6 05/11] test/py: Add pycryptodomex to list of required pakages   Alexandru Gagniuc
• [PATCH v6 06/11] test/py: ecdsa: Add test for mkimage ECDSA signing   Alexandru Gagniuc
• [PATCH v6 07/11] doc: signature.txt: Document the keydir and keyfile arguments   Alexandru Gagniuc
• [PATCH v6 08/11] mkimage: Add a 'keyfile' argument for image signing   Alexandru Gagniuc
• [PATCH v6 09/11] lib/rsa: Use the 'keyfile' argument from mkimage   Alexandru Gagniuc
• [PATCH v6 10/11] lib/ecdsa: Use the 'keydir' argument from mkimage if appropriate   Alexandru Gagniuc
• [PATCH v6 11/11] test/py: ecdsa: Use mkimage keyfile instead of keydir argument   Alexandru Gagniuc
• [PATCH] mmc: fsl_esdhc_imx: fix the DTOCV to 0xE   Ye Li
• Marvell PHY Support   Marr, Hayden (Platform COE - Software)
• [PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat   Tom Rini
• [PATCH] Makefile: Add target to generate hex output for combined spl and dtb   Tom Rini
• Frustrations of running testing   Tom Rini
• [PATCH] arm: bootm: wrong lmb region reservation when PRAM is used   Aleksandar Gerasimovski
• Please pull mmc-2021-2-19   Tom Rini
• Pull request: u-boot-sunxi/master for v2021.04   Andre Przywara
• [PATCH 1/1] arm: qemu: support qfw   Asherah Connor
• [PATCH 0/1] Add preliminary support for QFW on Arm   Asherah Connor
• [PATCH 4/5] sun7i: add support for Micronova srl s027_3 board   Andre Przywara
• [PATCH v2 0/1] Move qfw to DM, add preliminary on Arm   Asherah Connor
• [PATCH v2 1/1] arm: x86: qemu: move qfw to DM, include Arm support   Asherah Connor
• [PATCH v2 1/1] arm: x86: qemu: move qfw to DM, include Arm support   Asherah Connor
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Lukasz Majewski
• [PATCH v2 1/1] arm: x86: qemu: move qfw to DM, include Arm support   Heinrich Schuchardt
• [PATCH 1/1] doc: qfw man-page   Heinrich Schuchardt
• [PATCH 1/1] x86: sizeof-array-div error in lpc_common_early_init   Heinrich Schuchardt
• [PATCH 1/1] dm: ddr: socfpga: don't assign values that are not used   Heinrich Schuchardt
• [PATCH 1/1] dm: error handling dev_get_dma_range()   Heinrich Schuchardt
• [PATCH 1/1] mtd: rawnand: cortina_nand: missing initialization   Heinrich Schuchardt
• [PATCH 1/1] net: cortina_ni: buffer overrun   Heinrich Schuchardt
• [AZURE FIX RESEND v2 PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default   Pali Rohár
• [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it   Pali Rohár
• [PATCH 1/1] arm: qemu: support qfw   Simon Glass
• [PATCH 1/1] dm: error handling dev_get_dma_range()   Simon Glass
• [PATCH 1/1] dm: ddr: socfpga: don't assign values that are not used   Simon Glass
• [PATCH 1/1] x86: sizeof-array-div error in lpc_common_early_init   Simon Glass
• [PATCH 1/1] doc: qfw man-page   Simon Glass
• [PATCH v2 01/38] pci: fsl_pci_init: Dynamically allocate the PCI regions   Simon Glass
• [PATCH v2 03/38] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Simon Glass
• [PATCH v2 13/38] cmd: Add a command to display the address map   Simon Glass
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Simon Glass
• [PATCH v2 22/38] ppc: qemu: Switch over to use DM ETH and PCI   Simon Glass
• [PATCH v2 26/38] virtio: Fix VirtIO BLK driver dependency   Simon Glass
• [PATCH v2 31/38] dm: sysreset: Add a Kconfig option for the 'reset' command   Simon Glass
• [PATCH] arm: include: secure: Don't include asm\global_data.h in .S file   Simon Glass
• [PATCH] lib: sha512: include "compiler.h"   Simon Glass
• [PATCH 1/1] test: missing dependency for test/cmd/setexpr.c   Simon Glass
• [PATCH] button: add udevice forward declaration   Simon Glass
• [PATCH v2 2/3] firmware: scmi: sandbox test for voltage regulator   Simon Glass
• [PATCH v2 1/3] firmware: scmi: voltage regulator   Simon Glass
• [PATCH v2 3/3] firmware: scmi: fix inline comments and minor coding style issues   Simon Glass
• [PATCH v6 11/11] test/py: ecdsa: Use mkimage keyfile instead of keydir argument   Simon Glass
• [PATCH 2/4] pinephone_defconfig: reduce boot delay   Nicolas Boulenguez
• [PATCH 20/20] Enable led on boot to notify user of boot status   Nicolas Boulenguez
• [PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40   Nicolas Boulenguez
• [PATCH] sunxi-common: support loading compressed kernel images on ARMv8   Nicolas Boulenguez
• [PATCH] arm: dts: sun50i-a64-pinephone: fix random wifi mac address   Nicolas Boulenguez
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Bin Meng
• [PATCH v2 03/38] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Bin Meng
• Pull request: u-boot-sunxi/master for v2021.04   Tom Rini
• [PATCH v2 01/38] pci: fsl_pci_init: Dynamically allocate the PCI regions   Tom Rini
• [PATCH v2 2/2] clk: imx8mp Enable EQOS clock   Arendt, Steffen
• [PATCH] usb: kbd: Also accept keyboards with Interrupt OUT endpoint   Stefan Brüns
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Ilias Apalodimas
• [PATCH 0/2 v3] Add ESRT and test ESRT creation   Jose Marinho
• [PATCH 1/2 v3] efi: Add ESRT to the EFI system table   Jose Marinho
• [PATCH 2/2 v3] efi: ESRT creation tests   Jose Marinho
• [PATCH] tools/mkeficapsule.c: fix DEBUG build   Klaus Heinrich Kiwi
• [PATCH 2/2] mx28evk: Convert to driver model   Tom Rini
• [PATCH 2/2] mx28evk: Convert to driver model   Fabio Estevam
• [PATCH] usb: kbd: Also accept keyboards with Interrupt OUT endpoint   Marek Vasut
• [PATCH 2/2] mx28evk: Convert to driver model   Tom Rini
• [PATCH 1/1] arm: qemu: support qfw   Tom Rini
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Tom Rini
• [PATCH 00/57] Enforce DM_MMC migration and remove platforms   Tom Rini
• [PATCH 01/57] arm: Remove xfi3 board   Tom Rini
• [PATCH 02/57] arm: Remove MX23_OLINUXINO board   Tom Rini
• [PATCH 03/57] arm: Remove SANSA_FUZE_PLUS board   Tom Rini
• [PATCH 04/57] arm: Remove sc_sps_1 board   Tom Rini
• [PATCH 05/57] arm: Remove ts4600 board   Tom Rini
• [PATCH 06/57] arm: Remove apf27 board   Tom Rini
• [PATCH 07/57] arm: Remove mx25pdk board   Tom Rini
• [PATCH 08/57] arm: Remove openrd board   Tom Rini
• [PATCH 09/57] arm: Remove sheevaplug board   Tom Rini
• [PATCH 10/57] arm: Remove vexpress_ca15_tc2 board   Tom Rini
• [PATCH 11/57] arm: Remove secomx6quq7 board   Tom Rini
• [PATCH 12/57] arm: Remove s32v234evb board   Tom Rini
• [PATCH 13/57] arm: Remove bcm958712k board   Tom Rini
• [PATCH 14/57] arm: Remove wb45n board   Tom Rini
• [PATCH 15/57] arm: Remove wb50n board   Tom Rini
• [PATCH 16/57] arm: Remove picosam9g45 board   Tom Rini
• [PATCH 17/57] arm: Remove bcm28155_ap board   Tom Rini
• [PATCH 18/57] arm: Remove bcm23550_w1d board   Tom Rini
• [PATCH 19/57] arm: Remove warp board   Tom Rini
• [PATCH 20/57] arm: Remove Broadcom Cygnus boards   Tom Rini
• [PATCH 21/57] arm: Remove platinum_picon board   Tom Rini
• [PATCH 22/57] arm: Remove embest mx6boards support   Tom Rini
• [PATCH 23/57] arm: Remove udoo and udoo_neo boards   Tom Rini
• [PATCH 24/57] arm: Remove tricorder board   Tom Rini
• [PATCH 25/57] arm: Remove omap3_ha board   Tom Rini
• [PATCH 26/57] arm: Remove am3517_crane board   Tom Rini
• [PATCH 27/57] arm: Remove kc1 board   Tom Rini
• [PATCH 28/57] arm: Remove usbarmory board   Tom Rini
• [PATCH 29/57] arm: Remove xpress board   Tom Rini
• [PATCH 30/57] arm: Remove dms-ba16 board   Tom Rini
• [PATCH 31/57] arm: Remove zc5202 and zc5601 boards   Tom Rini
• [PATCH 32/57] arm: Remove pfla02 board   Tom Rini
• [PATCH 33/57] arm: Remove mx53ard board   Tom Rini
• [PATCH 34/57] arm: Remove mx53evk board   Tom Rini
• [PATCH 35/57] arm: Remove mx53smd board   Tom Rini
• [PATCH 36/57] arm: Remove ts4800 board   Tom Rini
• [PATCH 37/57] arm: Remove titanium board   Tom Rini
• [PATCH 38/57] arm: Remove cgtqmx6eval board   Tom Rini
• [PATCH 39/57] arm: Remove mx6dlarm2 board   Tom Rini
• [PATCH 40/57] arm: Remove sksimx6 board   Tom Rini
• [PATCH 41/57] arm: Remove tqma6s_wru4_mmc config   Tom Rini
• [PATCH 42/57] ppc: Remove T1040RDB boards   Tom Rini
• [PATCH 43/57] ppc: Remove TARGET_T1040QDS references   Tom Rini
• [PATCH 44/57] ppc: Remove T2081QDS board and ARCH_T2081 support   Tom Rini
• [PATCH 45/57] ppc: Remove MPC8308RDB board   Tom Rini
• [PATCH 46/57] ppc: Remove gdsys strider boards   Tom Rini
• [PATCH 47/57] ppc: Remove gdsys hrcon boards   Tom Rini
• [PATCH 48/57] ppc: Remove controlcenterd boards   Tom Rini
• [PATCH 49/57] ppc: Remove ARCH_P1022 support   Tom Rini
• [PATCH 50/57] ppc: Remove MPC837XERDB board   Tom Rini
• [PATCH 51/57] ppc: configs: Remove a few non-updated build configurations   Tom Rini
• [PATCH 52/57] ppc: Remove MPC8569MDS board   Tom Rini
• [PATCH 53/57] ppc: Remove Cyrus_P5020 and P5040 boards   Tom Rini
• [PATCH 54/57] ppc: Remove MPC837XEMDS board   Tom Rini
• [PATCH 55/57] ppc: Remove T1023RDB board   Tom Rini
• [PATCH 56/57] ppc: Remove T4160RDB board   Tom Rini
• [PATCH 57/57] DM: DM_MMC migration is now mandatory for non-SPL   Tom Rini
• [PATCH] mx6sabre: Fix boot failure   Ye Li
• [PATCH] arm: mach-imx: Fix speculative instruction prefetch issue   Ye Li
• [PATCH 44/57] ppc: Remove T2081QDS board and ARCH_T2081 support   Chris Packham
• [PATCH] i2c: at91: fix crash when using 'i2c probe'   Heiko Schocher
• [PATCH v3 3/3] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO   Heiko Schocher
• i2c: i2c-gpio: Fix GPIO output   Heiko Schocher
• [PATCH v3 1/3] dm: i2c: allow disabling driver model in SPL   Heiko Schocher
• [PATCH v3 2/3] board: freescale: drop CONFIG_DM_I2C undefs   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [PATCH v2 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Heiko Schocher
• [PATCH v2 20/38] pci: mpc85xx: Support controller register physical address beyond 32-bit   Heiko Schocher
• [PATCH v2 21/38] pci: mpc85xx: Support 64-bit bus and cpu address   Heiko Schocher
• [PATCH 1/2] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: ACPI tables must be in EfiACPIReclaimMemory   Heinrich Schuchardt
• [PATCH] sunxi: add fdtoverlay_addr_r environment variable   Jernej Skrabec
• Pull request for efi-2021-04-rc3   Heinrich Schuchardt
• [PATCH 2/2] mx28evk: Convert to driver model   Fabio Estevam
• [PATCH 07/57] arm: Remove mx25pdk board   Fabio Estevam
• [PATCH 33/57] arm: Remove mx53ard board   Fabio Estevam
• [PATCH 35/57] arm: Remove mx53smd board   Fabio Estevam
• [PATCH 1/1] net: cortina_ni: buffer overrun   Ramon Fried
• [PATCH 44/57] ppc: Remove T2081QDS board and ARCH_T2081 support   Tom Rini
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Simon Glass
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Simon Glass
• [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ   Ye Li
• [PATCH 2/4] arm: dts: imx8mq: Add alias for two usb controllers   Ye Li
• [PATCH 3/4] arm: imx8mq: Add USB clock init function   Ye Li
• [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port   Ye Li
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Anatolij Gustschin
• [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• Pull request for efi-2021-04-rc3   Tom Rini
• [PATCH v2 1/3] firmware: scmi: voltage regulator   Jaehoon Chung
• [PATCH v2 2/3] firmware: scmi: sandbox test for voltage regulator   Jaehoon Chung
• [PATCH v2 3/3] firmware: scmi: fix inline comments and minor coding style issues   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc_imx: fix the DTOCV to 0xE   Jaehoon Chung
• [PATCH v4] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Andre Przywara
• [PATCH] arm: include: secure: Don't include asm\global_data.h in .S file   Lim, Elly Siew Chin
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Bin Meng
• [v2] arm: include: secure: Don't include asm\global_data.h in .S file   Siew Chin Lim
• i.MX8MQ EVK not booting with latest mainline U-Boot   Fabio Estevam
• [PATCH 2/3] am33xx: board: remove GPIO platforma data   Lokesh Vutla
• [PATCH 42/57] ppc: Remove T1040RDB boards   Priyanka Jain
• [PATCH 49/57] ppc: Remove ARCH_P1022 support   Priyanka Jain
• [PATCH 51/57] ppc: configs: Remove a few non-updated build configurations   Priyanka Jain
• [PATCH 53/57] ppc: Remove Cyrus_P5020 and P5040 boards   Priyanka Jain
• [PATCH 52/57] ppc: Remove MPC8569MDS board   Priyanka Jain
• [PATCH 54/57] ppc: Remove MPC837XEMDS board   Priyanka Jain
• [PATCH v2 2/3] firmware: scmi: sandbox test for voltage regulator   Etienne Carriere
• [PATCH 55/57] ppc: Remove T1023RDB board   Priyanka Jain
• [PATCH 56/57] ppc: Remove T4160RDB board   Priyanka Jain
• [PATCH v3 1/4] firmware: scmi: voltage regulator   Etienne Carriere
• [PATCH v3 2/4] firmware: scmi: sandbox test for voltage regulator   Etienne Carriere
• [PATCH v3 3/4] firmware: scmi: fix inline comments and minor coding style issues   Etienne Carriere
• [PATCH v3 4/4] test: scmi: add local variables for scmi agent reference   Etienne Carriere
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Anatolij Gustschin
• [PATCH v2 02/38] ppc: qemu: Update MAINTAINERS for correct email address   Priyanka Jain
• [PATCH v2 03/38] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Priyanka Jain
• [PATCH v2 05/38] ppc: qemu: Fix CONFIG_SYS_PCI_MAP_END   Priyanka Jain
• [PATCH] vexpress64_fvp: Set DRAM to 4G to match with kernel devicetree   Diego Sueiro
• [PATCH v2 06/38] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Priyanka Jain
• [PATCH v2 08/38] ppc: qemu: Drop board_early_init_f()   Priyanka Jain
• [PATCH v2 09/38] ppc: qemu: Enable OF_CONTROL   Priyanka Jain
• [PATCH v2 10/38] ppc: qemu: Enable driver model   Priyanka Jain
• [PATCH v2 11/38] include: Remove extern from addr_map.h   Priyanka Jain
• [PATCH v2 12/38] lib: addr_map: Move address_map[] type to the header file   Priyanka Jain
• [PATCH v2 13/38] cmd: Add a command to display the address map   Priyanka Jain
• [PATCH v2 15/38] lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help   Priyanka Jain
• i.MX8MQ EVK not booting with latest mainline U-Boot   ZHIZHIKIN Andrey
• [PATCH v2 06/38] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Bin Meng
• [PATCH 42/57] ppc: Remove T1040RDB boards   Y.b. Lu
• [PATCH v2 16/38] ppc: io.h: Use addrmap_ translation APIs only in post-relocation phase   Priyanka Jain
• [PATCH 55/57] ppc: Remove T1023RDB board   Y.b. Lu
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Maxime Ripard
• [PATCH 56/57] ppc: Remove T4160RDB board   Y.b. Lu
• [PATCH v3] video: sunxi_display: Convert to DM_VIDEO   Maxime Ripard
• [PATCH v2 17/38] common: Move initr_addr_map() to a bit earlier   Priyanka Jain
• [PATCH v2 18/38] ppc: qemu: Switch over to use DM serial   Priyanka Jain
• [PATCH v2 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Priyanka Jain
• [PATCH] ARM: dts: k3-j7200-common-proc-board-u-boot: Fix broken ethernet   Lokesh Vutla
• [PATCH] clk: ti: improve debug messages for clkctrl driver   Lokesh Vutla
• [PATCH v2 20/38] pci: mpc85xx: Support controller register physical address beyond 32-bit   Priyanka Jain
• [PATCH 1/3] arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7   Lokesh Vutla
• [RESEND PATCH 0/2] clk patches from 'Add DM support for omap PWM backlight' series   Lokesh Vutla
• [PATCH] arm: dts: sync am33xx-clocks with Linux 5.9-rc7   Lokesh Vutla
• [GIT PULL] TI changes for v2021.04 rc3   Lokesh Vutla
• [PATCH 1/1] arm: qemu: support qfw   Asherah Connor
• [PATCH v2 22/38] ppc: qemu: Switch over to use DM ETH and PCI   Priyanka Jain
• [PATCH v2 24/38] cmd: Fix virtio command dependency   Priyanka Jain
• [PATCH v2 25/38] ppc: qemu: Enable VirtIO NET support   Priyanka Jain
• [PATCH v2 26/38] virtio: Fix VirtIO BLK driver dependency   Priyanka Jain
• [PATCH v2 27/38] ppc: qemu: Enable VirtIO BLK support   Priyanka Jain
• [PATCH v2 29/38] gpio: mpc8xxx: Support controller register physical address beyond 32-bit   Priyanka Jain
• [PATCH v2 28/38] ppc: mpc85xx: Add 'gpibe' register to 'struct ccsr_gpio'   Priyanka Jain
• [PATCH v2 30/38] ppc: qemu: Enable GPIO support   Priyanka Jain
• [PATCH v2 31/38] dm: sysreset: Add a Kconfig option for the 'reset' command   Priyanka Jain
• [PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR   Roger Pau Monné
• [PATCH v2 32/38] ppc: qemu: Enable support for power off via GPIO   Priyanka Jain
• [PATCH v2 33/38] ppc: qemu: Enable RTC support via I2C   Priyanka Jain
• [PATCH v2 34/38] ppc: qemu: Delete the temporary FDT virtual-physical mapping after U-Boot is relocated   Priyanka Jain
• [PATCH v2 36/38] ppc: qemu: Drop fixed_sdram()   Priyanka Jain
• [PATCH v2 35/38] ppc: qemu: Drop a custom env variable 'fdt_addr_r'   Priyanka Jain
• [PATCH 2/2] build/DTC: fix sed usage in DTC command   Roger Pau Monné
• [PATCH v2 37/38] ppc: qemu: Move board directory from board/freescale to board/emulation   Priyanka Jain
• [PATCH v2 38/38] doc: Add a reST document for qemu-ppce500   Priyanka Jain
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Simon Glass
• [PATCH v3 4/4] test: scmi: add local variables for scmi agent reference   Simon Glass
• [v2] arm: include: secure: Don't include asm\global_data.h in .S file   Simon Glass
• [PATCH 1/1] arm: qemu: support qfw   Simon Glass
• [PATCH 0/2] odroid-go2: two small config changes   Roger Pau Monné
• [PATCH 1/2] odroid-go2: do not disable EFI   Roger Pau Monné
• [PATCH 2/2] odroid-go2: fix default FDT file path   Roger Pau Monné
• https://github.com/swarren/uboot-test-hooks marked as archived   Heinrich Schuchardt
• [PATCH 1/1] arm: qemu: support qfw   Heinrich Schuchardt
• [PATCH] sunxi: board: Splitting CHIP defconfig for nand.   Maxime Ripard
• [PATCH v2 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Bin Meng
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Bin Meng
• Please pull u-boot-video   Anatolij Gustschin
• i.MX8MQ EVK not booting with latest mainline U-Boot   Fabio Estevam
• [PATCH 42/57] ppc: Remove T1040RDB boards   Tom Rini
• [PATCH 56/57] ppc: Remove T4160RDB board   Tom Rini
• [PATCH 55/57] ppc: Remove T1023RDB board   Tom Rini
• [PATCH v2 14/38] test: cmd: Add a basic test for 'addrmap' command   Tom Rini
• [aperez at alexperez.com: Re: [PATCH 53/57] ppc: Remove Cyrus_P5020 and P5040 boards]   Tom Rini
• [PATCH 08/10] sun5i: add support for DIP detection to CHIP board   Köry Maincent
• [PULL u-boot] Please pull u-boot-amlogic-20210222   Neil Armstrong
• [PATCH] ARM: mvebu: dts: omnia: enable eMMC writes   Petr Štetiar
• [PATCH v1] arm: imx8: added usbphy_regs struct   Oliver Graute
• [PATCH] uboot-test-hooks: Switch to our GitLab instance   Tom Rini
• [PATCH] uboot-test-hooks: Switch to our GitLab instance   Stephen Warren
• [PATCH] ARM: mvebu: dts: omnia: enable eMMC writes   Marek Behun
• [PATCH] tools: imx8mimage: Restore the original __ALIGN_MASK() macro   Fabio Estevam
• [PATCH] ARM: mvebu: dts: omnia: enable eMMC writes   Marek Behun
• [PATCH v2] tools: imx8mimage: Restore the original __ALIGN_MASK() macro   Fabio Estevam
• [PATCH] fs: ext4: Add metadata checksums support   Fredrik Hallenberg
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Reinoud Zandijk
• [PATCH 1/2] Re-embed the FDTs for the Malta targets.   Reinoud Zandijk
• [PATCH 2/2] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• [PATCH 16/25] arm: Remove gwventana boards   Tim Harvey
• [PATCH v2 1/2] mpc8379erdb: Add device tree   Tom Rini
• [PATCH v2 2/2] mpc8379erdb: Convert to DM_MMC   Tom Rini
• [PATCH v1 1/2] mpc83xx: kmeter1_defconfig add missing BAT4 config   Tom Rini
• [PATCH v1 2/2] mpc83xx: kmeter1: increase malloc_f space   Tom Rini
• [PATCH 1/3] mdio-uclass.c: support fixed-link subnodes   Tom Rini
• [PATCH 2/3] dm_qe_uec.c: fix indentation in uec_set_mac_if_mode()   Tom Rini
• [PATCH 3/3] uec.h: fix COFIG_DM typo   Tom Rini
• Please pull u-boot-video   Tom Rini
• [GIT PULL] TI changes for v2021.04 rc3   Tom Rini
• i.MX8MQ EVK not booting with latest mainline U-Boot   Fabio Estevam
• [PATCH] button: add udevice forward declaration   Neil Armstrong
• [PATCH] fs: ext4: Add metadata checksums support   Tom Rini
• [PATCH 16/25] arm: Remove gwventana boards   Tom Rini
• [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config   Neil Armstrong
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot,off-on-delay-us property   Fabio Estevam
• [PATCH 1/2] fsl_ifc: fix typo in the NOR CSOR register definition   Aleksandar Gerasimovski
• [PATCH 2/2] board/km: add support for seli8 design based on nxp ls102x   Aleksandar Gerasimovski
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot,off-on-delay-us property   ZHIZHIKIN Andrey
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Daniel Schwierzeck
• [PATCH 1/2] video: simple_panel: Add sharp,lq123p1jx31 display   Anatolij Gustschin
• [PATCH 2/2] video: simple_panel: Add boe,nv101wxmn51 display   Anatolij Gustschin
• [PATCH 1/2] video: eliminate unused drivers/video/mb862xx.c   Anatolij Gustschin
• [PATCH 2/2] video: remove unused include/mb862xx.h   Anatolij Gustschin
• [PATCH] Replace video_uc_platdata with video_uc_plat   Anatolij Gustschin
• [PATCH] common: splash_source: fix -Wint-to-pointer-cast warning   Anatolij Gustschin
• [PATCH 1/2] drivers: video: Add Support for Himax HX8238D Panel   Anatolij Gustschin
• [PATCH 2/2] Fix IDE commands issued, fix endian issues, fix non MMIO   Heinrich Schuchardt
• [PATCH 1/2] Re-embed the FDTs for the Malta targets.   Heinrich Schuchardt
• [PATCH v2] clk: fix clk_get_rate() documentation   Heinrich Schuchardt
• [PATCH] fdt_support.c: Allow late kernel cmdline modification   Niko Mauno
• [PATCH] video: Drop unprintable characters from video_font_data.h   Anatolij Gustschin
• [PATCH] tools/mkeficapsule.c: fix DEBUG build   Heinrich Schuchardt
• [PATCH] tools/mkeficapsule.c: fix DEBUG build   Heinrich Schuchardt
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Reinoud Zandijk
• [PULL u-boot] Please pull u-boot-amlogic-20210222   Tom Rini
• [PATCH] fdt_support.c: Allow late kernel cmdline modification   Tom Rini
• [PATCH v2 0/2] Fix MIPS/Malta target and its IDE work   Reinoud Zandijk
• [PATCH v2 1/2] Re-embed the FDTs for the Malta targets.   Reinoud Zandijk
• [PATCH v2 2/2] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• [PATCH v2 2/2] Fix IDE commands issued, fix endian issues, fix non MMIO   Heinrich Schuchardt
• [PATCH 1/1] pinephone_defconfig: lower DRAM clock to 528   Bob
• [PATCH 1/1] board_f.c: print DRAM clock speed   Bobby The Builder
• [PATCH V2 0/2] power: remove non-DM max8997/8 files   Jaehoon Chung
• [PATCH V2 1/2] board: samsung: covert to driver model about power_key_pressed   Jaehoon Chung
• [PATCH V2 2/2] power: pmic: remove pmic_max8997/8 files   Jaehoon Chung
• [PATCH 2/3] am33xx: board: remove GPIO platforma data   Dario Binacchi
• [PATCH v2 1/2] Re-embed the FDTs for the Malta targets.   Tom Rini
• [PATCH v2] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   Fabio Estevam
• [EXTERNAL] Re: U-Boot ECDSA Implementation Question   Alex G.
• [PATCH v2 1/2] Re-embed the FDTs for the Malta targets.   Simon Glass
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Daniel Schwierzeck
• [PATCH v2] clk: fix clk_get_rate() documentation   Giulio Benetti
• [PATCH v1] arm: imx8: added usbphy_regs struct   Peng Fan (OSS)
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot,off-on-delay-us property   Peng Fan
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot, off-on-delay-us property   Fabio Estevam
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot,off-on-delay-us property   Peng Fan
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot, off-on-delay-us property   Fabio Estevam
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot,off-on-delay-us property   Peng Fan (OSS)
• [PATCH] JFFS2: fix the reading address over nand's limit   Wagner Popov dos Santos
• [PATCH] JFFS2: fix jffs2 summary datacrc status uninitialized   Wagner Popov dos Santos
• [PATCH 1/1] arm: qemu: support qfw   Asherah Connor
• [PATCH] uboot-test-hooks: Switch to our GitLab instance   Asherah Connor
• [PATCH] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Aswath Govindraju
• [PATCH] fdt_support.c: Allow late kernel cmdline modification   Niko Mauno
• [PATCH] common: Add "ifndef __ASSEMBLY__" in asm/global_data.h   Siew Chin Lim
• [v2] arm: include: secure: Don't include asm\global_data.h in .S file   Lim, Elly Siew Chin
• [PATCH] Makefile: Add target to generate hex output for combined spl and dtb   Lim, Elly Siew Chin
• [PATCH] mips: mt7628: fix ddr_type for MT7688KN   Weijie Gao
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Aaron Williams
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Bin Meng
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Stefan Roese
• [PULL u-boot] Please pull u-boot-amlogic-20210222   Neil Armstrong
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Mark Kettenis
• [PATCH v2] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR   Peter Bergin
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Aaron Williams
• [PATCH] ARM: stm32: Add USB host boot support   Patrick DELAUNAY
• [PATCH v1] arm: imx8: added usbphy_regs struct   Marek Vasut
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Nicolas Saenz Julienne
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Stefan Roese
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Nicolas Saenz Julienne
• [PATCH 2/2] pinctrl: at91-pio4: add support for slew-rate   Eugen.Hristev at microchip.com
• [PATCH 1/3] x86: Fix member check in intel_gnvs   Simon Glass
• [PATCH 2/3] x86: Move INTEL_ACPIGEN to arch/x86   Simon Glass
• [PATCH 3/3] x86: Select advanced Intel code only if allowed   Simon Glass
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Mark Kettenis
• [PATCH 42/57] ppc: Remove T1040RDB boards   Priyanka Jain (OSS)
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Stefan Roese
• [PATCH 56/57] ppc: Remove T4160RDB board   Priyanka Jain (OSS)
• [PATCH v2 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Priyanka Jain (OSS)
• [PATCH v2 06/38] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Priyanka Jain (OSS)
• [PATCH] ARM: dts: imx8mq-evk: Remove u-boot, off-on-delay-us property   Fabio Estevam
• [PATCH 2/2] pinctrl: at91-pio4: add support for slew-rate   Claudiu.Beznea at microchip.com
• [PATCH v3 0/4] Move qfw to DM, add Arm support   Asherah Connor
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Asherah Connor
• [PATCH v3 2/4] arm: x86: qemu: add UCLASS_QFW, split driver into _pio and _mmio   Asherah Connor
• [PATCH v3 3/4] arm: x86: qemu: unify qfw driver functions as qfw_   Asherah Connor
• [PATCH v3 4/4] qemu: add sandbox driver and tests   Asherah Connor
• [PATCH v3 4/4] qemu: add sandbox driver and tests   Asherah Connor
• [PATCH 42/57] ppc: Remove T1040RDB boards   Tom Rini
• [PATCH 1/2] spi: nxp_fspi: Fix error reporting   Adam Ford
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Heinrich Schuchardt
• [PATCH 08/10] sun5i: add support for DIP detection to CHIP board   Andre Przywara
• [PATCH] arm64: zynqmp: Do not clear reset reason   Michal Simek
• [PATCH v3 0/5] clk: Add support to enable clocks   Michal Simek
• [PATCH] net: gem: Fix error path in zynq_gem_probe   Michal Simek
• [PATCH] arm64: zynqmp: Rename zc1275/zcu1275 to be aligned with DT name   Michal Simek
• [PATCH] xilinx: zynq: Enable time and timer commands   Michal Simek
• [PATCH] arm64: zynqmp: Increase size of malloc pool   Michal Simek
• [PATCH] arm64: zynqmp: Add emmc specific parameters   Michal Simek
• [PATCH] arm64: zynqmp: Add missing psu inits for zcu208/216   Michal Simek
• [PATCH] arm64: zynqmp: Add idt 8a34001 chip to zcu208/zcu216   Michal Simek
• [PATCH] arm64: zynqmp: Update psu_init for zcu1275   Michal Simek
• [PATCH] arm64: zynqmp: Update device tree properties for nand flash   Michal Simek
• [PATCH] spi: zynqmp_gqspi: fix set_speed bug on multiple runs   Michal Simek
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Aaron Williams
• [PATCH 08/10] sun5i: add support for DIP detection to CHIP board   Köry Maincent
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Reinoud Zandijk
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Tom Rini
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Tom Rini
• [PATCH v2 1/2] Re-embed the FDTs for the Malta targets.   Reinoud Zandijk
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20210223   Neil Armstrong
• [PULL u-boot] Please pull u-boot-amlogic-20210223   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20210223   Neil Armstrong
• [PATCH v2 2/2] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• rk3399-gru-kevin: issues on bringup   Simon Glass
• [PATCH] button: adc: fix treshold typo   Neil Armstrong
• [EXT] USB3 XHCI crashing with USB 3 hub on Octeon   Stefan Roese
• [GIT PULL] xilinx patches for v2021.04-rc3   Michal Simek
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Heinrich Schuchardt
• [PATCH v2 1/2] Re-embed the FDTs for the Malta targets.   Simon Glass
• [PATCH] common: Add "ifndef __ASSEMBLY__" in asm/global_data.h   Simon Glass
• [PATCH v3 2/4] arm: x86: qemu: add UCLASS_QFW, split driver into _pio and _mmio   Simon Glass
• [PATCH v3 4/4] qemu: add sandbox driver and tests   Simon Glass
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Tom Rini
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Heinrich Schuchardt
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [RFC PATCH 0/2] net: dsa: various fixes   Michael Walle
• [RFC PATCH 1/2] net: dsa: return early if there is no master   Michael Walle
• [RFC PATCH 2/2] net: dsa: probe master device   Michael Walle
• [PATCH] Makefile: Add target to generate hex output for combined spl and dtb   Tom Rini
• [RFC PATCH 1/2] net: dsa: return early if there is no master   Vladimir Oltean
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Tom Rini
• [RFC PATCH 2/2] net: dsa: probe master device   Vladimir Oltean
• [RFC PATCH 1/2] net: dsa: return early if there is no master   Michael Walle
• [PATCH 0/2 v4] Add ESRT and test ESRT creation   Jose Marinho
• [PATCH 1/2 v4] efi: Add ESRT to the EFI system table   Jose Marinho
• [PATCH 2/2 v4] efi: ESRT creation tests   Jose Marinho
• [PATCH 16/25] arm: Remove gwventana boards   Tim Harvey
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Daniel Schwierzeck
• [PATCH] button: adc: fix treshold typo   Marek Szyprowski
• Broken build on OpenBSD   Mark Kettenis
• Broken build on OpenBSD   Alex G.
• [RFC PATCH 2/2] net: dsa: probe master device   Michael Walle
• [RFC PATCH 1/2] net: dsa: return early if there is no master   Michael Walle
• [PATCH 1/1] efi_loader: limit output length for VenHw, VenMedia   Heinrich Schuchardt
• [PATCH 00/19] video: sunxi: Rework DE2 driver   Jernej Skrabec
• [PATCH 01/19] sunxi: video: select dw-hdmi in Kconfig, not Makefile   Jernej Skrabec
• [PATCH 02/19] video: sunxi: Add mode_valid callback to sunxi_dw_hdmi   Jernej Skrabec
• [PATCH 03/19] common: edid: check for digital display earlier   Jernej Skrabec
• [PATCH 04/19] common: edid: extract code for detailed timing search   Jernej Skrabec
• [PATCH 05/19] common: edid: Search for valid timing in extension block   Jernej Skrabec
• [PATCH 06/19] video: sunxi: Use DW-HDMI hpd function   Jernej Skrabec
• [PATCH 07/19] video: sunxi: Remove check for ddc-i2c-bus property   Jernej Skrabec
• [PATCH 08/19] video: sunxi: Remove TV probe from DE2   Jernej Skrabec
• [PATCH 09/19] video: sunxi: de2: switch to public uclass functions   Jernej Skrabec
• [PATCH 10/19] video: sunxi: dw-hdmi: probe driver by compatible   Jernej Skrabec
• [PATCH 0/2] Fix MIPS/Malta target and its IDE work   Heinrich Schuchardt
• [PATCH 11/19] video: sunxi: dw-hdmi: read address from DT node   Jernej Skrabec
• [PATCH 12/19] video: dw-hdmi: modify phy init callback to include full timings   Jernej Skrabec
• [PATCH 13/19] video: sunxi: dw-hdmi: move PHY config to appropriate place   Jernej Skrabec
• [PATCH 14/19] video: sunxi: dw-hdmi: rework PHY initialization   Jernej Skrabec
• [PATCH 15/19] video: sunxi: de2: switch to DT probing   Jernej Skrabec
• [PATCH 16/19] video: sunxi: de2: read address from DT node   Jernej Skrabec
• [PATCH 17/19] clk: sunxi: Add DE2 clocks to H3 and A64   Jernej Skrabec
• [PATCH 18/19] clk: sunxi: add DE2 clock driver   Jernej Skrabec
• [PATCH 19/19] video: sunxi: de2: switch clock setup to DM model   Jernej Skrabec
• Broken build on OpenBSD   Simon Glass
• Broken build on OpenBSD   Simon Glass
• Broken build on OpenBSD   Tom Rini
• rk3399-gru-kevin: issues on bringup   Marty E. Plummer
• Broken build on OpenBSD   Alex G.
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Asherah Connor
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Tom Rini
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Asherah Connor
• [PATCH v3 1/4] arm: x86: qemu: move qfw to DM, include Arm support   Asherah Connor
• [PATCH] Nokia RX-51: Enable CONFIG_CMD_BOOTD   Pali Rohár
• [v2] Makefile: socfpga: Add target to generate hex output for combined spl and dtb   Siew Chin Lim
• [GIT PULL] xilinx patches for v2021.04-rc3   Tom Rini
• [PATCH] Makefile: Add target to generate hex output for combined spl and dtb   Lim, Elly Siew Chin
• [PATCH v4 0/5] Move qfw to DM, add Arm support   Asherah Connor
• [PATCH v4 1/5] arm: x86: qemu: move qfw to DM uclass, add Arm support   Asherah Connor
• [PATCH v4 2/5] arm: x86: qemu: unify qfw driver functions as qfw_   Asherah Connor
• [PATCH v4 3/5] qemu: add sandbox driver and tests   Asherah Connor
• [PATCH v4 4/5] test: qemu: add simple test for cmd_qfw   Asherah Connor
• [PATCH v4 5/5] qemu: add documentation to qfw.h   Asherah Connor
• [IMPORTANT] gitlab relocation / rename   Wolfgang Denk
• [PATCH] arm64: zynqmp: Rename clocks as per the Arasan NAND driver   Michal Simek
• [PATCH] arm: dts: stm32mp15: remove duplicate uart nodes   Patrick Delaunay
• [PATCH 1/2] odroid-go2: do not disable EFI   Roger Pau Monné
• [PATCH 2/2] odroid-go2: fix default FDT file path   Roger Pau Monné
• [PATCH 0/6] stm32mp1_trusted_defconfig rely on SCMI support   Patrick Delaunay
• [PATCH 1/6] ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver   Patrick Delaunay
• [PATCH 2/6] clk: stm32mp1: gets root clocks from fdt   Patrick Delaunay
• [PATCH 3/6] scmi: Include device_compat.h   Patrick Delaunay
• [PATCH 4/6] scmi: define LOG_CATEGORY   Patrick Delaunay
• [PATCH 5/6] scmi: cosmetic: reorder include files   Patrick Delaunay
• [PATCH 6/6] configs: stm32mp1_trusted_defconfig rely on SCMI support   Patrick Delaunay
• [RFC PATCH 0/2] env: sf: remove the static env_flash variable   Patrick Delaunay
• [RFC PATCH 1/2] env: sf: add missing spi_flash_free   Patrick Delaunay
• [RFC PATCH 2/2] env: sf: remove the static env_flash variable   Patrick Delaunay
• How to define CONFIG_SYS_MMC_ENV_PART?   Алексей Беляев
• Is it possible to place uImage in eMMC boot0 partition?   Алексей Беляев
• [PATCH v5 07/10] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   Pratyush Yadav
• [PATCH v5 08/10] mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte   Pratyush Yadav
• [PATCH 1/1] Correct U-Boot upstream repository   Heinrich Schuchardt
• [PATCH 1/2] configs: stm32: Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT for stm32 boards   Patrice Chotard
• [PATCH 2/2] board: st: Remove board_early_init_f and board_late_init callbacks for stm32 boards   Patrice Chotard
• [PATCH v5 09/10] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH v5 10/10] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH v5 00/10] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH] firmware: scmi: Replace memcpy_from/toio() by memcpy() in scmi_read/write_resp_from_smt()   Patrice Chotard
• [PATCH] arch: cache: cp15: Add mmu_set_region_dcache_behaviour() when SYS_DCACHE_OFF is enable   Patrice Chotard
• [PATCH] arm: stm32mp: Fix compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are enabled   Patrice Chotard
• [PATCH 1/1] Correct U-Boot upstream repository   Bin Meng
• [PATCH 1/1] Correct U-Boot upstream repository   Tom Rini
• [PATCH] image: Avoid -ENODATA in host tools   Simon Glass
• [PATCH] fdt_support.c: Allow late kernel cmdline modification   Tom Rini
• [PATCH] net: add MMIO Register MDIO MUX driver   Neil Armstrong
• [PATCH] net: designware: add DM_MDIO support   Neil Armstrong
• [PATCH] firmware: scmi: Replace memcpy_from/toio() by memcpy() in scmi_read/write_resp_from_smt()   Mark Kettenis
• [PATCH] image: Avoid -ENODATA in host tools   Mark Kettenis
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Pavol Rohár
• [PATCH] configs: meson64: add fdtoverlay_addr_r   Neil Armstrong
• Re: How to define CONFIG_SYS_MMC_ENV_PART?   Sean Anderson
• Is it possible to place uImage in eMMC boot0 partition?   Sean Anderson
• [PATCH 1/1] Correct U-Boot upstream repository   Wolfgang Denk
• [PATCH 1/1] Correct U-Boot upstream repository   Heinrich Schuchardt
• [PATCH 40/57] arm: Remove sksimx6 board   Stefano Babic
• [PATCH 1/1] Correct U-Boot upstream repository   Tom Rini
• [PATCH] net: use a more deterministic approach to get the active ethernet device   Michael Walle
• rk3399-gru-kevin: issues on bringup   Simon Glass
• [PATCH] net: add Amlogic Meson G12A MDIO MUX driver   Neil Armstrong
• [PATCH 0/4] net: dsa: various fixes   Michael Walle
• [PATCH 1/4] net: dsa: return early if there is no master   Michael Walle
• [PATCH 2/4] net: dsa: probe master device   Michael Walle
• [PATCH 3/4] net: dsa: remove NULL check for priv and platform data   Michael Walle
• [PATCH 4/4] net: dsa: remove master santiy check   Michael Walle
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• [PATCH 4/4] net: dsa: remove master santiy check   Vladimir Oltean
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Michael Walle
• [PATCH 4/4] net: dsa: remove master santiy check   Michael Walle
• rk3399-gru-kevin: issues on bringup   Marty E. Plummer
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Michael Walle
• [PATCH 4/4] net: dsa: remove master santiy check   Vladimir Oltean
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Heinrich Schuchardt
• [PATCH 4/4] net: dsa: remove master santiy check   Michael Walle
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Vladimir Oltean
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Vladimir Oltean
• [PATCH 4/4] net: dsa: remove master santiy check   Vladimir Oltean
• [linux-sunxi] [PATCH 14/19] video: sunxi: dw-hdmi: rework PHY initialization   Jernej Škrabec
• [PATCH 4/4] net: dsa: remove master santiy check   Michael Walle
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Michael Walle
• [PATCH] net: designware: add Amlogic Meson8b & later glue driver   Neil Armstrong
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Tom Rini
• DM_MMC, BLK   Heinrich Schuchardt
• DM_MMC, BLK   Tom Rini
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Vladimir Oltean
• Do U-boot Drivers Support this Marvell PHY Chip?   Marr, Hayden (Platform COE - Software)
• [PATCH 4/4] net: dsa: remove master santiy check   Vladimir Oltean
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• [PATCHv2] uboot-test-hooks: Switch to our GitLab instance   Tom Rini
• DM_MMC, BLK   Heinrich Schuchardt
• [PATCH 3/4] net: dsa: remove NULL check for priv and platform data   Vladimir Oltean
• [PATCH 4/4] net: dsa: remove master santiy check   Vladimir Oltean
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Michael Walle
• [PATCH 4/4] net: dsa: remove master santiy check   Michael Walle
• DM_MMC, BLK   Simon Glass
• [PATCH] spl: Add callback for preprocessing loaded FIT header before parsing   Farhan Ali
• [PATCH] mtd: Update fail_addr when erase fails due to bad blocks   Farhan Ali
• [PATCH] tools: Remove #include <version.h>   Pali Rohár
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Tim Harvey
• make O=directory parameter   Fred 1
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Simon Glass
• [PATCH u-boot-marvell v2 19/18] ddr: marvell: a38x: Add more space for additional info from SPD   Marek Behún
• [PATCH] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Heiko Schocher
• [PATCH v4 0/5] Move qfw to DM, add Arm support   Asherah Connor
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Michael Walle
• [PATCH 1/1] Correct U-Boot upstream repository   Wolfgang Denk
• [RFC/RFT 0/7] arm: meson: static ethernet init cleanup   Neil Armstrong
• [RFC/RFT 1/7] configs: update Amlogic Meson GXL & GXM config for MDIO MUX   Neil Armstrong
• [RFC/RFT 2/7] configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUX   Neil Armstrong
• [RFC/RFT 3/7] arm: meson: remove static MDIO mux handling   Neil Armstrong
• [RFC/RFT 4/7] configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCs   Neil Armstrong
• [RFC/RFT 5/7] net: designware: remove amlogic compatibles   Neil Armstrong
• [RFC/RFT 6/7] arm: meson: remove static ethernet memory power domain enable   Neil Armstrong
• [RFC/RFT 7/7] arm: meson: remove static ethernet link setup   Neil Armstrong
• [PATCH v3 00/38] ppc: qemu: Convert qemu-ppce500 to driver model and enable additional driver support   Bin Meng
• [PATCH v3 01/38] pci: fsl_pci_init: Dynamically allocate the PCI regions   Bin Meng
• [PATCH v3 02/38] ppc: qemu: Update MAINTAINERS for correct email address   Bin Meng
• [PATCH v3 03/38] common: fdt_support: Support special case of PCI address in fdt_read_prop()   Bin Meng
• [PATCH v3 04/38] ppc: qemu: Support non-identity PCI bus address   Bin Meng
• [PATCH v3 05/38] ppc: qemu: Fix CONFIG_SYS_PCI_MAP_END   Bin Meng
• [PATCH v3 06/38] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Bin Meng
• [PATCH v3 07/38] ppc: qemu: Drop init_laws() and print_laws()   Bin Meng
• [PATCH v3 08/38] ppc: qemu: Drop board_early_init_f()   Bin Meng
• [PATCH v3 09/38] ppc: qemu: Enable OF_CONTROL   Bin Meng
• [PATCH v3 10/38] ppc: qemu: Enable driver model   Bin Meng
• [PATCH v3 11/38] include: Remove extern from addr_map.h   Bin Meng
• [PATCH v3 12/38] lib: addr_map: Move address_map[] type to the header file   Bin Meng
• [PATCH v3 13/38] cmd: Add a command to display the address map   Bin Meng
• [PATCH v3 14/38] test: cmd: Add a basic test for 'addrmap' command   Bin Meng
• [PATCH v3 15/38] lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help   Bin Meng
• [PATCH v3 16/38] ppc: io.h: Use addrmap_ translation APIs only in post-relocation phase   Bin Meng
• [PATCH v3 17/38] common: Move initr_addr_map() to a bit earlier   Bin Meng
• [PATCH v3 18/38] ppc: qemu: Switch over to use DM serial   Bin Meng
• [PATCH v3 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Bin Meng
• [PATCH v3 20/38] pci: mpc85xx: Support controller register physical address beyond 32-bit   Bin Meng
• [PATCH v3 21/38] pci: mpc85xx: Support 64-bit bus and cpu address   Bin Meng
• [PATCH v3 22/38] ppc: qemu: Switch over to use DM ETH and PCI   Bin Meng
• [PATCH v3 23/38] ppc: qemu: Drop CONFIG_OF_BOARD_SETUP   Bin Meng
• [PATCH v3 24/38] cmd: Fix virtio command dependency   Bin Meng
• [PATCH v3 25/38] ppc: qemu: Enable VirtIO NET support   Bin Meng
• [PATCH v3 26/38] virtio: Fix VirtIO BLK driver dependency   Bin Meng
• [PATCH v3 27/38] ppc: qemu: Enable VirtIO BLK support   Bin Meng
• [PATCH v3 28/38] ppc: mpc85xx: Add 'gpibe' register to 'struct ccsr_gpio'   Bin Meng
• [PATCH v3 29/38] gpio: mpc8xxx: Support controller register physical address beyond 32-bit   Bin Meng
• [PATCH v3 30/38] ppc: qemu: Enable GPIO support   Bin Meng
• [PATCH v3 31/38] dm: sysreset: Add a Kconfig option for the 'reset' command   Bin Meng
• [PATCH v3 32/38] ppc: qemu: Enable support for power off via GPIO   Bin Meng
• [PATCH v3 33/38] ppc: qemu: Enable RTC support via I2C   Bin Meng
• [PATCH v3 34/38] ppc: qemu: Delete the temporary FDT virtual-physical mapping after U-Boot is relocated   Bin Meng
• [PATCH v3 35/38] ppc: qemu: Drop a custom env variable 'fdt_addr_r'   Bin Meng
• [PATCH v3 36/38] ppc: qemu: Drop fixed_sdram()   Bin Meng
• [PATCH v3 37/38] ppc: qemu: Move board directory from board/freescale to board/emulation   Bin Meng
• [PATCH v3 38/38] doc: Add a reST document for qemu-ppce500   Bin Meng
• u-boot on RPi4 32bit - issue after upgrading the firmware   Marek Szyprowski
• [PATCH] board: st: remove the nand MTD configuration for NOR boot in stm32mp1 board   Patrick Delaunay
• [PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat   Matthias Brugger
• u-boot on RPi4 32bit - issue after upgrading the firmware   Nicolas Saenz Julienne
• [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port   Fabio Estevam
• [PATCH 1/1] efi_loader: fix documentation in efi_loader.h   Heinrich Schuchardt
• u-boot on RPi4 32bit - issue after upgrading the firmware   Marek Szyprowski
• [PATCH 1/4] stm32mp: stm32prog: Add Kconfig file for stm32prog command   Patrick Delaunay
• [PATCH 2/4] stm32mp: stm32prog: Add CONFIG_CMD_STM32PROG_SERIAL and _USB   Patrick Delaunay
• [PATCH 3/4] stm32mp: stm32prog: reactivate console and display serial error   Patrick Delaunay
• [PATCH 4/4] stm32mp: stm32prog: replace alias by serial device sequence number   Patrick Delaunay
• [PATCH] stm32mp: bsec: manage clock when present in device tree   Patrick Delaunay
• [PATCH u-boot-marvell 00/18] Upgrade A38x DDR3 training to version 14.0.0   Stefan Roese
• [PATCH] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Oleksandr Suvorov
• [PATCH 1/1] x86: sizeof-array-div error in lpc_common_early_init   Bin Meng
• [PATCH] cmd: pwm: Rework argc sanity checking   Tom Rini
• [PATCH 1/1] fs/squashfs: NULL dereference in sqfs_closedir()   Tom Rini
• [PATCH v2] cmd: fdt: skip board specific fixup using env variable   Tom Rini
• [PATCH u-boot 1/2] fs: btrfs: skip xattrs in directory listing   Tom Rini
• [PATCH u-boot 2/2] fs: btrfs: change directory list output to be aligned as before   Tom Rini
• [PATCH 1/3] Kconfig: SPL_FIT_SIGNATURE selects FIT_SIGNATURE   Tom Rini
• [PATCH 2/3] Kconfig: SPL_FIT_SIGNATURE requires SPL_LOAD_FIT   Tom Rini
• [PATCH 3/3] Makefile: Add (default) DEVICE_TREE to SPL FIT   Tom Rini
• [PATCH 1/3] x86: Fix member check in intel_gnvs   Bin Meng
• [PATCH u-boot] cmd: pinmux: depend on PINCTRL   Tom Rini
• [PATCH v2] config: hikey: convert to DM_USB and DM_ETH   Tom Rini
• [PATCH 2/3] x86: Move INTEL_ACPIGEN to arch/x86   Bin Meng
• [PATCH 3/3] x86: Select advanced Intel code only if allowed   Bin Meng
• [PATCH 1/1] malloc: adjust memcpy() and memset() definitions.   Tom Rini
• [PATCH 1/2] scripts/check-config.sh: fix to be compatible with BSD sed   Tom Rini
• [PATCH 2/2] build/DTC: fix sed usage in DTC command   Tom Rini
• [PATCH] virtio: fix off by one device id comparison   Tom Rini
• [PATCH] vexpress64_fvp: Set DRAM to 4G to match with kernel devicetree   Tom Rini
• [PATCH] lib: rsa: Add debug message on algo mismatch   Tom Rini
• [PATCH 1/2] configs: BPI-R2: Disable EFI Grub workaround   Tom Rini
• [PATCH 1/1] lib: rsa: struct udevice build warning   Tom Rini
• [PATCH 1/1] test: missing dependency for test/cmd/setexpr.c   Tom Rini
• [PATCH 1/1] x86: sizeof-array-div error in lpc_common_early_init   Bin Meng
• [PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat   Tom Rini
• [PATCH] lib: sha512: include "compiler.h"   Tom Rini
• [PATCH 1/1] dm: ddr: socfpga: don't assign values that are not used   Tom Rini
• [PATCH 1/1] mtd: rawnand: cortina_nand: missing initialization   Tom Rini
• [PATCH 1/1] net: cortina_ni: buffer overrun   Tom Rini
• [PATCH] common: Add "ifndef __ASSEMBLY__" in asm/global_data.h   Tom Rini
• [PATCH 1/3] x86: Fix member check in intel_gnvs   Bin Meng
• [PATCH 2/3] x86: Move INTEL_ACPIGEN to arch/x86   Bin Meng
• [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port   Ye Li
• [PATCH 3/3] x86: Select advanced Intel code only if allowed   Bin Meng
• imx8mq: phycore-imx8mp   Heiko Schocher
• [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port   Fabio Estevam
• [PATCH u-boot-dm + u-boot-spi v3 00/11] Support SPI NORs and OF partitions in `mtd list`   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 01/11] dm: core: add test for ofnode_get_addr_size_index()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 02/11] dm: core: add non-translating version of ofnode_get_addr_size_index()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 03/11] dm: core: add ofnode_get_path()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 04/11] mtd: add support for parsing partitions defined in OF   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 05/11] mtd: spi-nor: allow registering multiple MTDs when DM is enabled   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 06/11] mtd: spi-nor: fill-in mtd->dev member   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 07/11] mtd: remove mtd_probe() function   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 08/11] mtd: probe SPI NOR devices in mtd_probe_devices()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 09/11] cmd: mtd: print device OF path in listing   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 10/11] mtd: compare also with OF path and device name in get_mtd_device_nm()   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v3 11/11] cmd: mtd: expand <name> argument definition in command help   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v2 1/7] dm: core: add test for ofnode_get_addr_size_index()   Marek Behún
• [PATCH] arm: dts: sun50i-a64-pinephone: fix random wifi mac address   André Przywara
• [PATCH] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Aswath Govindraju
• [PATCH 20/20] Enable led on boot to notify user of boot status   André Przywara
• [PATCH] sunxi-common: support loading compressed kernel images on ARMv8   André Przywara
• make O=directory parameter   Tom Rini
• [PATCH] tools: Remove #include <version.h>   Tom Rini
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Tom Rini
• [PATCH] net: use the same alias stem for ethernet as linux   Michael Walle
• [PATCH u-boot-dm + u-boot-spi v3 05/11] mtd: spi-nor: allow registering multiple MTDs when DM is enabled   Miquel Raynal
• [PATCH] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Fabio Estevam
• [PATCH u-boot-dm + u-boot-spi v3 00/11] Support SPI NORs and OF partitions in `mtd list`   Miquel Raynal
• [PATCH] net: use the same alias stem for ethernet as linux   Fabio Estevam
• [PATCH] fdt_support.c: Allow late kernel cmdline modification   Niko Mauno
• [PATCH 0/2] A64/R40 DRAM controller dual-rank-related changes   Icenowy Zheng
• [PATCH 1/2] sunxi: support asymmetric dual rank DRAM on A64/R40   Icenowy Zheng
• [PATCH 2/2] sunxi: enable dual rank memory on R40   Icenowy Zheng
• [PATCH] avb: Fix error when partition not found   schspa
• [PATCH 2/4] pinephone_defconfig: reduce boot delay   André Przywara
• [PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40   André Przywara
• [PATCH 20/20] Enable led on boot to notify user of boot status   Peter Robinson
• DM_MMC, BLK   Heinrich Schuchardt
• [PATCH 07/57] arm: Remove mx25pdk board   Tom Rini
• [PATCH 33/57] arm: Remove mx53ard board   Tom Rini
• [PATCH 35/57] arm: Remove mx53smd board   Tom Rini
• [PATCH 40/57] arm: Remove sksimx6 board   Tom Rini
• [PATCH 51/57] ppc: configs: Remove a few non-updated build configurations   Tom Rini
• [PATCH 52/57] ppc: Remove MPC8569MDS board   Tom Rini
• DM_MMC, BLK   Tom Rini
• [PATCH] cmd: gpt: Add option to write GPT partitions to environment variable   Farhan Ali
• [PATCH 1/4] net: dsa: return early if there is no master   Ramon Fried
• [PATCH 2/4] net: dsa: probe master device   Ramon Fried
• [PATCH 3/4] net: dsa: remove NULL check for priv and platform data   Ramon Fried
• [PATCH] RFC: spl: fit: Use libfdt functions to read stringlist   Simon Glass
• [PATCH v4 2/5] arm: x86: qemu: unify qfw driver functions as qfw_   Simon Glass
• [PATCH v4 3/5] qemu: add sandbox driver and tests   Simon Glass
• [PATCH v4 4/5] test: qemu: add simple test for cmd_qfw   Simon Glass
• [PATCH v4 5/5] qemu: add documentation to qfw.h   Simon Glass
• [PATCH v4 1/5] arm: x86: qemu: move qfw to DM uclass, add Arm support   Simon Glass
• [PATCH 4/6] scmi: define LOG_CATEGORY   Simon Glass
• [PATCH u-boot-dm + u-boot-spi v3 09/11] cmd: mtd: print device OF path in listing   Simon Glass
• [PATCH u-boot-dm + u-boot-spi v3 03/11] dm: core: add ofnode_get_path()   Simon Glass
• [PATCH u-boot-dm + u-boot-spi v3 10/11] mtd: compare also with OF path and device name in get_mtd_device_nm()   Simon Glass
• Broken build on OpenBSD   Simon Glass
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Simon Glass
• [PATCH] net: use the same alias stem for ethernet as linux   Ramon Fried
• [PATCH] net: add Amlogic Meson G12A MDIO MUX driver   Ramon Fried
• [PATCH] net: designware: add DM_MDIO support   Ramon Fried
• [PATCH v1] net: eth-uclass: Change uclass driver name to ethernet   Ramon Fried
• [PATCH] net: add MMIO Register MDIO MUX driver   Ramon Fried
• [PATCH] configs: stm32mp1: enable uefi related commands   Ilias Apalodimas
• [PATCH] cmd: gpt: Add option to write GPT partitions to environment variable   Heinrich Schuchardt
• [PATCH u-boot-dm + u-boot-spi v3 10/11] mtd: compare also with OF path and device name in get_mtd_device_nm()   Marek Behun
• [PATCH v4 5/5] qemu: add documentation to qfw.h   Heinrich Schuchardt
• [PATCH u-boot-dm + u-boot-spi v3 10/11] mtd: compare also with OF path and device name in get_mtd_device_nm()   Tom Rini
• [PATCH u-boot-dm + u-boot-spi v3 10/11] mtd: compare also with OF path and device name in get_mtd_device_nm()   Marek Behun
• [PATCH u-boot-dm + u-boot-spi v3 10/11] mtd: compare also with OF path and device name in get_mtd_device_nm()   Tom Rini
• [PATCH] Makefile: Fix generation of flash.bin u-boot.itb with binman   Marek Vasut
• [PATCH] spi: imx: Implement set_speed   Marek Vasut
• [PATCH] spi: Update speed/mode on change   Marek Vasut
• [PATCH] ARM: imx: Add OCRAM_S into iMX8M MMU tables   Marek Vasut
• [PATCH 2/4] pinephone_defconfig: reduce boot delay   Maxime Ripard
• [PATCH] ARM: imx: Add missing FEC ethernet quirk for MX8M   Marek Vasut
• [PATCH][RESEND] ARM: imx: Add missing FEC ethernet quirk for MX8M   Marek Vasut
• [PATCH] rk3399: Add basic support for helios64   Uwe Kleine-König
• [PATCH][RESEND] ARM: imx: Add missing FEC ethernet quirk for MX8M   Fabio Estevam
• [PATCH] cmd: gpt: Add option to write GPT partitions to environment variable   Farhan Ali
• [PATCH][RESEND] ARM: imx: Add missing FEC ethernet quirk for MX8M   Marek Vasut
• [PATCH] rk3399: Add basic support for helios64   Dennis Gilmore
• [PATCH][RESEND] ARM: imx: Add missing FEC ethernet quirk for MX8M   Fabio Estevam
• [PATCH][RESEND] ARM: imx: Add missing FEC ethernet quirk for MX8M   Marek Vasut
• [PATCH] spi: imx: Implement set_speed   Bin Meng
• [PATCH] spi: imx: Implement set_speed   Marek Vasut
• [PATCH] spi: imx: Implement set_speed   Bin Meng
• [GIT PULL] u-boot-riscv/master   Leo Liang
• [PATCH] spi: imx: Implement set_speed   Marek Vasut
• [PATCH V2] spi: imx: Implement set_speed   Marek Vasut
• [PATCH v4 1/5] arm: x86: qemu: move qfw to DM uclass, add Arm support   Bin Meng
• [PATCH v4 1/5] arm: x86: qemu: move qfw to DM uclass, add Arm support   Bin Meng
• [PATCH] pxe_utils: improve dftoverlay path   Artem Lapkin
• [PATCH v4 5/5] qemu: add documentation to qfw.h   Asherah Connor
• [PATCH v4 5/5] qemu: add documentation to qfw.h   Asherah Connor
• [PATCH v4 1/5] arm: x86: qemu: move qfw to DM uclass, add Arm support   Asherah Connor
• [PATCH v4 1/5] arm: x86: qemu: move qfw to DM uclass, add Arm support   Bin Meng
• [PATCH] pxe_utils: add localcmd defination   Artem Lapkin
• [PATCH v1 1/1] drivers: mmc: iproc_sdhci: enable HS200 mode   Rayagonda Kokatanur
• [PATCH v2] serial: s5p: Allow independent selection   Minkyu Kang
• [PATCH V2 0/2] power: remove non-DM max8997/8 files   Minkyu Kang
• [PATCH 1/6] samsung: goni: change maintainer   Minkyu Kang
• [PATCH v2 1/1] drivers: mmc: iproc_sdhci: enable HS200 mode   Rayagonda Kokatanur
• [PATCH v2 1/1] drivers: mmc: iproc_sdhci: enable HS200 mode   Jaehoon Chung
• [PATCH 1/1] efi_loader: fix documentation in efi_loader.h   AKASHI Takahiro
• Pull request: u-boot-samsung master   Minkyu Kang
• [PATCH] rk3399: Add basic support for helios64   Uwe Kleine-König
• imx8mq: phycore-imx8mp   Teresa Remmet
• [PATCH] cmd: mmc: modify more readable about hwpartition usage   Jaehoon Chung
• [EXT] [PATCH] ARM: imx: Add OCRAM_S into iMX8M MMU tables   Ye Li
• [PATCH v2] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Aswath Govindraju
• [PATCH] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Aswath Govindraju
• [PATCH] serial: ns16550: Correct the base address type   Bin Meng
• [PATCH 1/2] of: addr: Abort address translation for parent nodes missing 'ranges'   Bin Meng
• [PATCH 2/2] of: addr: Translate 'dma-ranges' for parent nodes missing 'dma-ranges'   Bin Meng
• [PATCH v2] cfi_flash: Fix detection of 8-bit bus flash devices via address shift   Stefan Roese
• [PATCH] firmware: scmi: Replace memcpy_from/toio() by memcpy() in scmi_read/write_resp_from_smt()   Patrice CHOTARD
• [PATCH V2] spi: imx: Implement set_speed   Jagan Teki
• [PATCH] mtd: spi-nor.h: Change spaces to tabs   Bin Meng
• [PATCH 2/2] mtd: spi-nor-ids: Add Gigadevice GD25LQ64C   Jagan Teki
• [PATCH] mtd: spi-nor.h: Change spaces to tabs   Jagan Teki
• [EXT] [PATCH v2] tools: imx8mimage: Restore the original __ALIGN_MASK() macro   Ye Li
• [PATCH 1/1] mtd: spi-nor-ids: Add support of flash protection to w25q128   Jagan Teki
• [PATCH v1 2/7] sf protect: warn about failed (un)lock operation   Jagan Teki
• [PATCH v1 3/7] SST26* locking: need to enable write   Jagan Teki
• [PATCH] Fix data abort in startup for at91 machines based on ARM926EJS   Martin Townsend
• [PATCH] avb: Fix error when partition not found   Igor Opaniuk
• [PATCH u-boot-marvell 1/5] pci: pci_mvebu: use dev_seq instead of static variable   Stefan Roese
• [PATCH u-boot-marvell 2/5] pci: pci_mvebu: cosmetic fix   Stefan Roese
• [PATCH u-boot-marvell 3/5] pci: pci_mvebu: debug rd/wr config as other drivers do   Stefan Roese
• [PATCH u-boot-marvell 4/5] pci: pci_mvebu: refactor validation of addresses for config access   Stefan Roese
• [PATCH u-boot-marvell 5/5] pci: pci_mvebu: set local dev to number 1   Stefan Roese
• [PATCH u-boot-marvell 1/4] rtc: add armada38x driver   Stefan Roese
• [PATCH v3 04/38] ppc: qemu: Support non-identity PCI bus address   Priyanka Jain (OSS)
• [PATCH u-boot-marvell v2 1/4] rtc: add armada38x driver   Marek Behún
• [PATCH u-boot-marvell v2 2/4] arm: mvebu: turris_omnia: Enable DM_RTC and RTC_ARMADA38X   Marek Behún
• [PATCH u-boot-marvell v2 3/4] arm: mvebu: turris_omnia: Enable CMD_WDT   Marek Behún
• [PATCH u-boot-marvell v2 4/4] arm: mvebu: turris_omnia: Enable CMD_FS_UUID   Marek Behún
• [PATCH v3 13/38] cmd: Add a command to display the address map   Priyanka Jain (OSS)
• [PATCH v3 14/38] test: cmd: Add a basic test for 'addrmap' command   Priyanka Jain (OSS)
• [PATCH v3 17/38] common: Move initr_addr_map() to a bit earlier   Priyanka Jain (OSS)
• [PATCH v3 19/38] pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW   Priyanka Jain (OSS)
• [v2] Makefile: socfpga: Add target to generate hex output for combined spl and dtb   Tan, Ley Foon
• [PATCH] cmd: mmc: check whether bootbus's arguments is valid or not   Jaehoon Chung
• [PATCH v3 31/38] dm: sysreset: Add a Kconfig option for the 'reset' command   Priyanka Jain (OSS)
• [PATCH 1/2] spi: nxp_fspi: Fix error reporting   Jagan Teki
• [PATCH v3 06/38] ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW   Priyanka Jain (OSS)
• [v3 2/6] arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)   Tan, Ley Foon
• [PATCH v1 4/7] write WPEN bit for SST26* devices when locking   Jagan Teki
• [v3 3/6] arm: socfpga: cmd: Support 'vab' command   Tan, Ley Foon
• [RFC PATCH] doc: mmc man-page   Jaehoon Chung
• [PATCH v2 05/14] spi: spi-mem: Add debug message for spi-mem ops   Jagan Teki
• [PATCH v2 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Jagan Teki
• [PATCH] MAINTAINERS: Update info for Raspberry Pi   matthias.bgg at kernel.org
• [PATCH v2 00/14] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Jagan Teki
• [RFC PATCH] doc: mmc man-page   Heinrich Schuchardt
• [PATCH v5 02/10] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH v5 04/10] mtd: spi-nor-core: Add support for volatile QE bit   Jagan Teki
• [PATCH 1/2] rng: iproc_rng200: Enable support for RPi4 armv7   matthias.bgg at kernel.org
• [PATCH 2/2] configs: rpi4_32: Enable iProc RNG200   matthias.bgg at kernel.org
• [PATCH] clk: zynqmp: Fix clk dump values   Michal Simek
• [PATCH u-boot-marvell] ddr: marvell: a38x: Add more space for additional info from SPD   Marek Behún
• [PATCH 0/4] arm: mvebu: turris_mox: Fix and enable PCIe devices   Stefan Roese
• [PATCH u-boot-marvell 0/5] pci_mvebu changes   Stefan Roese
• [PATCH u-boot-marvell] ARM: dts: armada-385-turris-omnia: rename node in -u-boot.dtsi file   Stefan Roese
• [PATCH u-boot-marvell v2 00/18] Upgrade A38x DDR3 training to version 14.0.0   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [RFC PATCH] doc: mmc man-page   Jaehoon Chung
• [PATCH u-boot-marvell v2 00/18] Upgrade A38x DDR3 training to version 14.0.0   Marek Behun
• [PATCH] mips: mt7628: fix ddr_type for MT7688KN   Stefan Roese
• make O=directory parameter   Fred 1
• Commit 401d1c4f5d2 ("common: Drop asm/global_data.h from common header") broke CONFIG_CMD_SQUASHFS=y   Pali Rohár
• [PATCH] configs: stm32mp1: enable uefi related commands   Patrick DELAUNAY
• [EXT] [PATCH] ARM: imx: Add OCRAM_S into iMX8M MMU tables   Marek Vasut
• [PATCH] configs: stm32mp1: enable uefi related commands   Ilias Apalodimas
• [PATCH] arm64: Update memcpy_{from, to}io() helpers   Patrice Chotard
• [PATCH 0/2] pinctrl: at91-pio4: add support for slew-rate   Eugen.Hristev at microchip.com
• [PATCH v2 04/14] mtd: spi-mem: Export spi_mem_default_supports_op   Sean Anderson
• Commit 401d1c4f5d2 ("common: Drop asm/global_data.h from common header") broke CONFIG_CMD_SQUASHFS=y   Tom Rini
• [PATCH 1/5] GitLab: Remove "tags" stanzas   Tom Rini
• [PATCH 2/5] pytest: Lower pygit2 requirement   Tom Rini
• [PATCH 3/5] Azure/GitLab: Ensure we use requirements.txt for testsuites   Tom Rini
• [PATCH 4/5] tests: patman: Add requests to the module list   Tom Rini
• [PATCH 5/5] patman: Assume we always have pygit2 for tests   Tom Rini
• [PATCH v2] configs: stm32mp1: enable uefi related commands   Ilias Apalodimas
• Commit 401d1c4f5d2 ("common: Drop asm/global_data.h from common header") broke CONFIG_CMD_SQUASHFS=y   Pali Rohár
• [PATCH v2 05/14] spi: spi-mem: Add debug message for spi-mem ops   Sean Anderson
• make O=directory parameter   Tom Rini
• [PATCH u-boot-dm + u-boot-spi v3 00/11] Support SPI NORs and OF partitions in `mtd list`   Patrice CHOTARD
• [PATCH] spi: Update speed/mode on change   Patrick DELAUNAY
• [PATCH v2] configs: stm32mp1: enable uefi related commands   Patrick DELAUNAY
• [PATCH] spi: Update speed/mode on change   Marek Vasut
• [PATCH 2/2 v4] efi: ESRT creation tests   Heinrich Schuchardt
• [PATCH 2/2] sunxi: enable dual rank memory on R40   Ivan Uvarov
• [PATCH] serial: ns16550: Correct the base address type   Simon Glass
• [PATCH v2] usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start() and usb_gadget_register_driver()   Neil Armstrong
• [PATCH] nvme: add cache flush in get/set_features   Neil Armstrong
• [PATCH v3 04/38] ppc: qemu: Support non-identity PCI bus address   Bin Meng
• [PATCH 2/2 v4] efi: ESRT creation tests   Heinrich Schuchardt
• [PATCH] nvme: add cache flush in get/set_features   Bin Meng
• [PATCH V2] spi: Update speed/mode on change   Marek Vasut
• [PATCH 3/5] Azure/GitLab: Ensure we use requirements.txt for testsuites   Bin Meng
• [PATCH 3/5] Azure/GitLab: Ensure we use requirements.txt for testsuites   Tom Rini
• [PATCH] arm: dts: stm32mp15: remove duplicate uart nodes   Patrice CHOTARD
• [PATCH] ARM: stm32: Add USB host boot support   Patrick DELAUNAY
• [RFC PATCH] nvme: Always invalidate whole cqes[] array   Jagan Teki
• [PATCH] arm: dts: stm32mp15: remove duplicate uart nodes   Patrick DELAUNAY
• [PATCH v2] configs: stm32mp1: enable uefi related commands   Patrick DELAUNAY
• [PATCH 1/2 v4] efi: Add ESRT to the EFI system table   Heinrich Schuchardt
• [PATCH] rk3399: Add basic support for helios64   Peter Robinson
• [PATCH] nvme: add cache flush in get/set_features   André Przywara
• [v4 0/7] Add Vendor Authorized Boot (VAB) support   Siew Chin Lim
• [v4 1/7] arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64   Siew Chin Lim
• [v4 2/7] arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)   Siew Chin Lim
• [v4 3/7] arm: socfpga: cmd: Support 'vab' command   Siew Chin Lim
• [v4 4/7] arm: socfpga: dts: soc64: Update filename in binman node of FIT image with VAB support   Siew Chin Lim
• [v4 5/7] configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfig   Siew Chin Lim
• [v4 6/7] configs: socfpga: Add defconfig for Agilex with VAB support   Siew Chin Lim
• [v4 7/7] Makefile: socfpga: Add target to generate hex output for combined spl and dtb   Siew Chin Lim
• [PATCH] nvme: add cache flush in get/set_features   Neil Armstrong
• [RFC PATCH] nvme: Always invalidate whole cqes[] array   Neil Armstrong
• [v3 2/6] arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)   Lim, Elly Siew Chin
• [v2] Makefile: socfpga: Add target to generate hex output for combined spl and dtb   Lim, Elly Siew Chin
• [RFC PATCH] nvme: Always invalidate whole cqes[] array   Suniel Mahesh
• [PATCH v2] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Oleksandr Suvorov
• [RESEND v4 0/7] Add Vendor Authorized Boot (VAB) support   Siew Chin Lim
• [RESEND v4 1/7] arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64   Siew Chin Lim
• [RESEND v4 2/7] arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)   Siew Chin Lim
• [RESEND v4 3/7] arm: socfpga: cmd: Support 'vab' command   Siew Chin Lim
• [RESEND v4 4/7] arm: socfpga: dts: soc64: Update filename in binman node of FIT image with VAB support   Siew Chin Lim
• [RESEND v4 5/7] configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfig   Siew Chin Lim
• [RESEND v4 6/7] configs: socfpga: Add defconfig for Agilex with VAB support   Siew Chin Lim
• [RESEND v4 7/7] Makefile: socfpga: Add target to generate hex output for combined spl and dtb   Siew Chin Lim
• [v4 0/7] Add Vendor Authorized Boot (VAB) support   Lim, Elly Siew Chin
• [PULL] Pull request for u-boot master / v2021.04 = u-boot-stm32-20210226   Patrick DELAUNAY
• [PATCH] rk3399: Add basic support for helios64   Uwe Kleine-König
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH] RFC: spl: fit: Use libfdt functions to read stringlist   Tom Rini
• [GIT PULL] u-boot-riscv/master   Tom Rini
• Pull request: u-boot-samsung master   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH v2] cmd: gpt: Add option to write GPT partitions to environment variable   Farhan Ali
• Broken build on OpenBSD   Alex G.
• [PATCH v2 00/14] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Sean Anderson
• [PULL] Pull request for u-boot master / v2021.04 = u-boot-stm32-20210226   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• [PATCH] arm64: rk3399: Add support NanoPi R4s   Patrick Wildt
• [PATCH] arm64: rk3399: Add support NanoPi R4s   Patrick Wildt
• [PATCH] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH v2 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Pali Rohár
• [PATCH v2 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH 3/5] Azure/GitLab: Ensure we use requirements.txt for testsuites   Bin Meng
• [PATCH v2 1/3] cmd: mvebu: Implement the Marvell hw_info command   Pali Rohár
• [PATCH 1/1] cmd/efidebug: add firmware management protocol GUID   Heinrich Schuchardt
• Pull request for efi-2021-04-rc3-2   Heinrich Schuchardt
• [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port   Ye Li
• [EXT] [PATCH] ARM: imx: Add OCRAM_S into iMX8M MMU tables   Ye Li
• [PATCH] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Jagan Teki
• [PATCH 0/5] board: imx8mm: Add Engicam i.Core MX8M Mini SoM   Jagan Teki
• [PATCH 1/5] arm64: dts: imx8mm: Add common -u-boot.dtsi   Jagan Teki
• [PATCH 2/5] configs: Add imx8mm-common header   Jagan Teki
• [PATCH 3/5] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM   Jagan Teki
• [PATCH 4/5] board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH 5/5] board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0   Jagan Teki
• [PATCH 1/1] video: add DejaVu Mono font   Heinrich Schuchardt
• [PATCH] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [EXT] [PATCH] ARM: imx: Add OCRAM_S into iMX8M MMU tables   Marek Vasut
• [PATCH v2 1/3] cmd: mvebu: Implement the Marvell hw_info command   Marek Behun
• [PATCH 0/6] efi_loader: Unicode output in UEFI applications   Heinrich Schuchardt
• [PATCH 1/6] efi_loader: move codepage 437 table   Heinrich Schuchardt
• [PATCH 2/6] efi_loader: carve out utf_to_cp()   Heinrich Schuchardt
• [PATCH 3/6] lib/charset: utf8_get() should return error   Heinrich Schuchardt
• [PATCH 4/6] lib/charset: UTF-8 stream conversion   Heinrich Schuchardt
• [PATCH 5/6] video: use int for character in putc_xy()   Heinrich Schuchardt
• [PATCH 6/6] video: support Unicode in video console   Heinrich Schuchardt
• [PATCH v2 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Marek Behun
• [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port   Fabio Estevam
• [PATCH] Revert "mmc: fsl_esdhc_imx: remove the 1ms delay before sending command"   Fabio Estevam
• [PATCH] ARM: imx: Do not hard-code MX8M MMU table DRAM entry offset   Marek Vasut
• [PATCH] ARM: imx: Do not hard-code MX8M MMU table DRAM entry offset   Fabio Estevam
• [PATCH] arm64: rk3399: Add support NanoPi R4s   xiaobo
• [PATCH] rk3399: Add basic support for helios64   Dennis Gilmore
• [PATCH] RFC: spl: fit: Use libfdt functions to read stringlist   Andre Przywara
• [PATCH 1/1] usb: USB keyboard requires DM_KEYBOARD   Heinrich Schuchardt
• [PATCH 1/1] pinephone_defconfig: lower DRAM clock to 528   André Przywara
• [PATCH v3 00/12] Add support for pinmux status command on beaglebone   Dario Binacchi
• [PATCH v3 01/12] pinctrl: single: fix format of structure documentation   Dario Binacchi
• [PATCH v3 02/12] pinctrl: single: fix the loop counter variable type   Dario Binacchi
• [PATCH v3 03/12] pinctrl: single: fix offset management   Dario Binacchi
• [PATCH v3 04/12] pinctrl: single: fix debug messages formatting   Dario Binacchi
• [PATCH v3 05/12] pinctrl: single: get register area size by device API   Dario Binacchi
• [PATCH v3 06/12] pinctrl: single: check "register-width" DT property   Dario Binacchi
• [PATCH v3 07/12] pinctrl: single: change function mask default value   Dario Binacchi
• [PATCH v3 08/12] pinctrl: single: add register access functions   Dario Binacchi
• [PATCH v3 09/12] pinctrl: single: add get_pins_count operation   Dario Binacchi
• [PATCH v3 10/12] pinctrl: single: add get_pin_name operation   Dario Binacchi
• [PATCH v3 11/12] pinctrl: single: add get_pin_muxing operation   Dario Binacchi
• [PATCH v3 12/12] test: pinmux: add test for 'pinctrl-single' driver   Dario Binacchi
• [PATCH 1/1] usb: USB keyboard requires DM_KEYBOARD   Marek Vasut
• [IMPORTANT] gitlab relocation / rename   Wolfgang Denk
• [PATCH 2/4] pinephone_defconfig: reduce boot delay   Andre Przywara
• [PATCH 0/1] rk3399 pinebook-pro enable display   Jesper Schmitz Mouridsen
• [PATCH 1/1] rk3399: pinebook-pro enable display   Jesper Schmitz Mouridsen
• [PATCH 0/9] stm32: Add Engicam STM32MP1 SoM   Jagan Teki
• [PATCH 1/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM   Jagan Teki
• [PATCH 2/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3   Jagan Teki
• [PATCH 3/9] ARM: stm32: Imply SPL_SPI_LOAD   Jagan Teki
• [PATCH 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0   Jagan Teki
• [PATCH 6/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM   Jagan Teki
• [PATCH 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3   Jagan Teki
• [PATCH 8/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board   Jagan Teki
• [PATCH 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF   Jagan Teki
• [PATCH 1/1] efi_loader: console size of vidconsole   Heinrich Schuchardt
• Pull request for efi-2021-04-rc3-2   Tom Rini
• [PATCH 1/1] video: fix positioning in TrueType console   Heinrich Schuchardt
• [PATCH 1/1] video: buffer overrun in TrueType console   Heinrich Schuchardt
• [PATCH v2 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH] hush: Fix assignments being misinterpreted as commands   Sean Anderson
• [PATCH v2 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCHv2] uboot-test-hooks: Switch to our GitLab instance   Tom Rini
• [PATCH 1/1] Correct U-Boot upstream repository   Tom Rini
• [PATCH v2 1/3] cmd: mvebu: Implement the Marvell hw_info command   Luka Kovacic
• [PATCH v2 1/3] cmd: mvebu: Implement the Marvell hw_info command   Luka Kovacic