[PATCH 15/25] arm: Remove 32bit vexpress boards
Tom Rini
trini at konsulko.com
Tue Feb 9 14:03:07 CET 2021
These boards have not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago. In addition there are other DM
migrations it is also missing. Remove them.
Cc: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
.azure-pipelines.yml | 6 -
.gitlab-ci.yml | 14 -
arch/arm/Kconfig | 18 -
arch/arm/dts/Makefile | 4 -
arch/arm/dts/vexpress-v2m-rs1.dtsi | 437 ---------------
arch/arm/dts/vexpress-v2m.dtsi | 451 ----------------
arch/arm/dts/vexpress-v2p-ca15_a7.dts | 682 ------------------------
arch/arm/dts/vexpress-v2p-ca5s.dts | 280 ----------
arch/arm/dts/vexpress-v2p-ca9.dts | 368 -------------
board/armltd/vexpress/Kconfig | 38 --
board/armltd/vexpress/MAINTAINERS | 10 -
board/armltd/vexpress/Makefile | 7 -
board/armltd/vexpress/vexpress_common.c | 203 -------
board/armltd/vexpress/vexpress_tc2.c | 84 ---
configs/vexpress_ca15_tc2_defconfig | 40 --
configs/vexpress_ca5x2_defconfig | 38 --
configs/vexpress_ca9x4_defconfig | 39 --
drivers/i2c/Kconfig | 2 +-
include/configs/vexpress_ca15_tc2.h | 19 -
include/configs/vexpress_ca5x2.h | 16 -
include/configs/vexpress_ca9x4.h | 16 -
21 files changed, 1 insertion(+), 2771 deletions(-)
delete mode 100644 arch/arm/dts/vexpress-v2m-rs1.dtsi
delete mode 100644 arch/arm/dts/vexpress-v2m.dtsi
delete mode 100644 arch/arm/dts/vexpress-v2p-ca15_a7.dts
delete mode 100644 arch/arm/dts/vexpress-v2p-ca5s.dts
delete mode 100644 arch/arm/dts/vexpress-v2p-ca9.dts
delete mode 100644 board/armltd/vexpress/Kconfig
delete mode 100644 board/armltd/vexpress/MAINTAINERS
delete mode 100644 board/armltd/vexpress/Makefile
delete mode 100644 board/armltd/vexpress/vexpress_common.c
delete mode 100644 board/armltd/vexpress/vexpress_tc2.c
delete mode 100644 configs/vexpress_ca15_tc2_defconfig
delete mode 100644 configs/vexpress_ca5x2_defconfig
delete mode 100644 configs/vexpress_ca9x4_defconfig
delete mode 100644 include/configs/vexpress_ca15_tc2.h
delete mode 100644 include/configs/vexpress_ca5x2.h
delete mode 100644 include/configs/vexpress_ca9x4.h
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
index a6279427e138..8a89a7959ee9 100644
--- a/.azure-pipelines.yml
+++ b/.azure-pipelines.yml
@@ -192,12 +192,6 @@ jobs:
evb_ast2500:
TEST_PY_BD: "evb-ast2500"
TEST_PY_ID: "--id qemu"
- vexpress_ca15_tc2:
- TEST_PY_BD: "vexpress_ca15_tc2"
- TEST_PY_ID: "--id qemu"
- vexpress_ca9x4:
- TEST_PY_BD: "vexpress_ca9x4"
- TEST_PY_ID: "--id qemu"
integratorcp_cm926ejs:
TEST_PY_BD: "integratorcp_cm926ejs"
TEST_PY_ID: "--id qemu"
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 2cdcd864c86a..8e18c3d8fbdd 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -217,20 +217,6 @@ sandbox_flattree test.py:
TEST_PY_BD: "sandbox_flattree"
<<: *buildman_and_testpy_dfn
-vexpress_ca15_tc2 test.py:
- tags: [ 'all' ]
- variables:
- TEST_PY_BD: "vexpress_ca15_tc2"
- TEST_PY_ID: "--id qemu"
- <<: *buildman_and_testpy_dfn
-
-vexpress_ca9x4 test.py:
- tags: [ 'all' ]
- variables:
- TEST_PY_BD: "vexpress_ca9x4"
- TEST_PY_ID: "--id qemu"
- <<: *buildman_and_testpy_dfn
-
integratorcp_cm926ejs test.py:
tags: [ 'all' ]
variables:
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index acffdc6a1ed8..2e75efe2da8e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -645,13 +645,6 @@ config ARCH_BCM6858
select OF_CONTROL
imply CMD_DM
-config TARGET_VEXPRESS_CA15_TC2
- bool "Support vexpress_ca15_tc2"
- select CPU_V7A
- select CPU_V7_HAS_NONSEC
- select CPU_V7_HAS_VIRT
- select PL011_SERIAL
-
config ARCH_BCMSTB
bool "Broadcom BCM7XXX family"
select CPU_V7A
@@ -663,16 +656,6 @@ config ARCH_BCMSTB
This enables support for Broadcom ARM-based set-top box
chipsets, including the 7445 family of chips.
-config TARGET_VEXPRESS_CA5X2
- bool "Support vexpress_ca5x2"
- select CPU_V7A
- select PL011_SERIAL
-
-config TARGET_VEXPRESS_CA9X4
- bool "Support vexpress_ca9x4"
- select CPU_V7A
- select PL011_SERIAL
-
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
select CPU_V7A
@@ -1964,7 +1947,6 @@ source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/Marvell/octeontx/Kconfig"
source "board/Marvell/octeontx2/Kconfig"
-source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/cortina/presidio-asic/Kconfig"
source "board/broadcom/bcm23550_w1d/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 12a74ed0eb08..f0944b7590cf 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1009,10 +1009,6 @@ dtb-$(CONFIG_TARGET_GE_BX50V3) += \
dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
-dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb
-dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
-dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
-
dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
diff --git a/arch/arm/dts/vexpress-v2m-rs1.dtsi b/arch/arm/dts/vexpress-v2m-rs1.dtsi
deleted file mode 100644
index d3963e9eaf48..000000000000
--- a/arch/arm/dts/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * original variant (vexpress-v2m.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m.dtsi!
- */
-
-/ {
- smb at 8000000 {
- motherboard {
- model = "V2M-P1";
- arm,hbi = <0x190>;
- arm,vexpress,site = <0>;
- arm,v2m-memory-map = "rs1";
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash at 0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <4 0x00000000 0x04000000>;
- bank-width = <4>;
- };
-
- psram at 1,00000000 {
- compatible = "arm,vexpress-psram", "mtd-ram";
- reg = <1 0x00000000 0x02000000>;
- bank-width = <4>;
- };
-
- ethernet at 2,02000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&v2m_fixed_3v3>;
- vddvario-supply = <&v2m_fixed_3v3>;
- };
-
- usb at 2,03000000 {
- compatible = "nxp,usb-isp1761";
- reg = <2 0x03000000 0x20000>;
- interrupts = <16>;
- port1-otg;
- };
-
- iofpga at 3,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg at 10000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x10000 0x1000>;
-
- v2m_led_gpios: gpio at 8 {
- compatible = "arm,vexpress-sysreg,sys_led";
- reg = <0x008 4>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_mmc_gpios: gpio at 48 {
- compatible = "arm,vexpress-sysreg,sys_mci";
- reg = <0x048 4>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_flash_gpios: gpio at 4c {
- compatible = "arm,vexpress-sysreg,sys_flash";
- reg = <0x04c 4>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
- v2m_sysctl: sysctl at 20000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
- };
-
- /* PCI-E I2C bus */
- v2m_i2c_pcie: i2c at 30000 {
- compatible = "arm,versatile-i2c";
- reg = <0x030000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- pcie-switch at 60 {
- compatible = "idt,89hpes32h8";
- reg = <0x60>;
- };
- };
-
- aaci at 40000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x040000 0x1000>;
- interrupts = <11>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
-
- mmci at 50000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x050000 0x1000>;
- interrupts = <9>, <10>;
- cd-gpios = <&v2m_mmc_gpios 0 0>;
- wp-gpios = <&v2m_mmc_gpios 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "mclk", "apb_pclk";
- };
-
- kmi at 60000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x060000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- kmi at 70000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x070000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- v2m_serial0: uart at 90000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart at a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart at b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart at c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- wdt at f0000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f0000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- v2m_timer01: timer at 110000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x110000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- v2m_timer23: timer at 120000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- /* DVI I2C bus */
- v2m_i2c_dvi: i2c at 160000 {
- compatible = "arm,versatile-i2c";
- reg = <0x160000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- dvi-transmitter at 39 {
- compatible = "sil,sii9022-tpi", "sil,sii9022";
- reg = <0x39>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- dvi_bridge_in: endpoint {
- remote-endpoint = <&clcd_pads>;
- };
- };
- };
- };
-
- dvi-transmitter at 60 {
- compatible = "sil,sii9022-cpi", "sil,sii9022";
- reg = <0x60>;
- };
- };
-
- rtc at 170000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x170000 0x1000>;
- interrupts = <4>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
-
- compact-flash at 1a0000 {
- compatible = "arm,vexpress-cf", "ata-generic";
- reg = <0x1a0000 0x100
- 0x1a0100 0xf00>;
- reg-shift = <2>;
- };
-
- clcd at 1f0000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f0000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&smbclk>;
- clock-names = "clcdclk", "apb_pclk";
- /* 800x600 16bpp @36MHz works fine */
- max-memory-bandwidth = <54000000>;
- memory-region = <&vram>;
-
- port {
- clcd_pads: endpoint {
- remote-endpoint = <&dvi_bridge_in>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
- };
- };
- };
-
- v2m_fixed_3v3: fixed-regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- leds {
- compatible = "gpio-leds";
-
- user1 {
- label = "v2m:green:user1";
- gpios = <&v2m_led_gpios 0 0>;
- linux,default-trigger = "heartbeat";
- };
-
- user2 {
- label = "v2m:green:user2";
- gpios = <&v2m_led_gpios 1 0>;
- linux,default-trigger = "mmc0";
- };
-
- user3 {
- label = "v2m:green:user3";
- gpios = <&v2m_led_gpios 2 0>;
- linux,default-trigger = "cpu0";
- };
-
- user4 {
- label = "v2m:green:user4";
- gpios = <&v2m_led_gpios 3 0>;
- linux,default-trigger = "cpu1";
- };
-
- user5 {
- label = "v2m:green:user5";
- gpios = <&v2m_led_gpios 4 0>;
- linux,default-trigger = "cpu2";
- };
-
- user6 {
- label = "v2m:green:user6";
- gpios = <&v2m_led_gpios 5 0>;
- linux,default-trigger = "cpu3";
- };
-
- user7 {
- label = "v2m:green:user7";
- gpios = <&v2m_led_gpios 6 0>;
- linux,default-trigger = "cpu4";
- };
-
- user8 {
- label = "v2m:green:user8";
- gpios = <&v2m_led_gpios 7 0>;
- linux,default-trigger = "cpu5";
- };
- };
-
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
- };
- };
-};
diff --git a/arch/arm/dts/vexpress-v2m.dtsi b/arch/arm/dts/vexpress-v2m.dtsi
deleted file mode 100644
index 798c97aff7fa..000000000000
--- a/arch/arm/dts/vexpress-v2m.dtsi
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * Original memory map ("Legacy memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m-rs1.dtsi!
- */
-
-/ {
- smb at 4000000 {
- motherboard {
- model = "V2M-P1";
- arm,hbi = <0x190>;
- arm,vexpress,site = <0>;
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash at 0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <1 0x00000000 0x04000000>;
- bank-width = <4>;
- };
-
- psram at 2,00000000 {
- compatible = "arm,vexpress-psram", "mtd-ram";
- reg = <2 0x00000000 0x02000000>;
- bank-width = <4>;
- };
-
- ethernet at 3,02000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <3 0x02000000 0x10000>;
- interrupts = <15>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&v2m_fixed_3v3>;
- vddvario-supply = <&v2m_fixed_3v3>;
- };
-
- usb at 3,03000000 {
- compatible = "nxp,usb-isp1761";
- reg = <3 0x03000000 0x20000>;
- interrupts = <16>;
- port1-otg;
- };
-
- iofpga at 7,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 7 0 0x20000>;
-
- v2m_sysreg: sysreg at 0 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x00000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0x1000>;
-
- v2m_led_gpios: gpio at 8 {
- compatible = "arm,vexpress-sysreg,sys_led";
- reg = <0x008 4>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_mmc_gpios: gpio at 48 {
- compatible = "arm,vexpress-sysreg,sys_mci";
- reg = <0x048 4>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_flash_gpios: gpio at 4c {
- compatible = "arm,vexpress-sysreg,sys_flash";
- reg = <0x04c 4>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
- v2m_sysctl: sysctl at 1000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x01000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
- };
-
- /* PCI-E I2C bus */
- v2m_i2c_pcie: i2c at 2000 {
- compatible = "arm,versatile-i2c";
- reg = <0x02000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- pcie-switch at 60 {
- compatible = "idt,89hpes32h8";
- reg = <0x60>;
- };
- };
-
- aaci at 4000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x04000 0x1000>;
- interrupts = <11>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
-
- mmci at 5000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x05000 0x1000>;
- interrupts = <9>, <10>;
- cd-gpios = <&v2m_mmc_gpios 0 0>;
- wp-gpios = <&v2m_mmc_gpios 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "mclk", "apb_pclk";
- };
-
- kmi at 6000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x06000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- kmi at 7000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x07000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- v2m_serial0: uart at 9000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x09000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart at a000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart at b000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart at c000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- wdt at f000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- v2m_timer01: timer at 11000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x11000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- v2m_timer23: timer at 12000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- /* DVI I2C bus */
- v2m_i2c_dvi: i2c at 16000 {
- compatible = "arm,versatile-i2c";
- reg = <0x16000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- dvi-transmitter at 39 {
- compatible = "sil,sii9022-tpi", "sil,sii9022";
- reg = <0x39>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * Both the core tile and the motherboard routes their output
- * pads to this transmitter. The motherboard system controller
- * can select one of them as input using a mux register in
- * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
- * the only platform with this specific set-up.
- */
- port at 0 {
- reg = <0>;
- dvi_bridge_in_ct: endpoint {
- remote-endpoint = <&clcd_pads_ct>;
- };
- };
- port at 1 {
- reg = <1>;
- dvi_bridge_in_mb: endpoint {
- remote-endpoint = <&clcd_pads_mb>;
- };
- };
- };
- };
-
- dvi-transmitter at 60 {
- compatible = "sil,sii9022-cpi", "sil,sii9022";
- reg = <0x60>;
- };
- };
-
- rtc at 17000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x17000 0x1000>;
- interrupts = <4>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
-
- compact-flash at 1a000 {
- compatible = "arm,vexpress-cf", "ata-generic";
- reg = <0x1a000 0x100
- 0x1a100 0xf00>;
- reg-shift = <2>;
- };
-
-
- clcd at 1f000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&smbclk>;
- clock-names = "clcdclk", "apb_pclk";
- /* 800x600 16bpp @36MHz works fine */
- max-memory-bandwidth = <54000000>;
- memory-region = <&vram>;
-
- port {
- clcd_pads_mb: endpoint {
- remote-endpoint = <&dvi_bridge_in_mb>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
- };
- };
- };
-
- v2m_fixed_3v3: fixed-regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- leds {
- compatible = "gpio-leds";
-
- user1 {
- label = "v2m:green:user1";
- gpios = <&v2m_led_gpios 0 0>;
- linux,default-trigger = "heartbeat";
- };
-
- user2 {
- label = "v2m:green:user2";
- gpios = <&v2m_led_gpios 1 0>;
- linux,default-trigger = "mmc0";
- };
-
- user3 {
- label = "v2m:green:user3";
- gpios = <&v2m_led_gpios 2 0>;
- linux,default-trigger = "cpu0";
- };
-
- user4 {
- label = "v2m:green:user4";
- gpios = <&v2m_led_gpios 3 0>;
- linux,default-trigger = "cpu1";
- };
-
- user5 {
- label = "v2m:green:user5";
- gpios = <&v2m_led_gpios 4 0>;
- linux,default-trigger = "cpu2";
- };
-
- user6 {
- label = "v2m:green:user6";
- gpios = <&v2m_led_gpios 5 0>;
- linux,default-trigger = "cpu3";
- };
-
- user7 {
- label = "v2m:green:user7";
- gpios = <&v2m_led_gpios 6 0>;
- linux,default-trigger = "cpu4";
- };
-
- user8 {
- label = "v2m:green:user8";
- gpios = <&v2m_led_gpios 7 0>;
- linux,default-trigger = "cpu5";
- };
- };
-
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
- };
- };
-};
\ No newline at end of file
diff --git a/arch/arm/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/dts/vexpress-v2p-ca15_a7.dts
deleted file mode 100644
index 00cd9f5bef2e..000000000000
--- a/arch/arm/dts/vexpress-v2p-ca15_a7.dts
+++ /dev/null
@@ -1,682 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 A7x3
- * Cortex-A15_A7 MPCore (V2P-CA15_A7)
- *
- * HBI-0249A
- */
-
-/dts-v1/;
-#include "vexpress-v2m-rs1.dtsi"
-
-/ {
- model = "V2P-CA15_CA7";
- arm,hbi = <0x249>;
- arm,vexpress,site = <0xf>;
- compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- i2c0 = &v2m_i2c_dvi;
- i2c1 = &v2m_i2c_pcie;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu at 0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
- cci-control-port = <&cci_control1>;
- cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
- capacity-dmips-mhz = <1024>;
- dynamic-power-coefficient = <990>;
- };
-
- cpu1: cpu at 1 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <1>;
- cci-control-port = <&cci_control1>;
- cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
- capacity-dmips-mhz = <1024>;
- dynamic-power-coefficient = <990>;
- };
-
- cpu2: cpu at 2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x100>;
- cci-control-port = <&cci_control2>;
- cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
- capacity-dmips-mhz = <516>;
- dynamic-power-coefficient = <133>;
- };
-
- cpu3: cpu at 3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x101>;
- cci-control-port = <&cci_control2>;
- cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
- capacity-dmips-mhz = <516>;
- dynamic-power-coefficient = <133>;
- };
-
- cpu4: cpu at 4 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x102>;
- cci-control-port = <&cci_control2>;
- cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
- capacity-dmips-mhz = <516>;
- dynamic-power-coefficient = <133>;
- };
-
- idle-states {
- CLUSTER_SLEEP_BIG: cluster-sleep-big {
- compatible = "arm,idle-state";
- local-timer-stop;
- entry-latency-us = <1000>;
- exit-latency-us = <700>;
- min-residency-us = <2000>;
- };
-
- CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
- compatible = "arm,idle-state";
- local-timer-stop;
- entry-latency-us = <1000>;
- exit-latency-us = <500>;
- min-residency-us = <2500>;
- };
- };
- };
-
- memory at 80000000 {
- device_type = "memory";
- reg = <0 0x80000000 0 0x40000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* Chipselect 2 is physically at 0x18000000 */
- vram: vram at 18000000 {
- /* 8 MB of designated video RAM */
- compatible = "shared-dma-pool";
- reg = <0 0x18000000 0 0x00800000>;
- no-map;
- };
- };
-
- wdt at 2a490000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0 0x2a490000 0 0x1000>;
- interrupts = <0 98 4>;
- clocks = <&oscclk6a>, <&oscclk6a>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- hdlcd at 2b000000 {
- compatible = "arm,hdlcd";
- reg = <0 0x2b000000 0 0x1000>;
- interrupts = <0 85 4>;
- clocks = <&hdlcd_clk>;
- clock-names = "pxlclk";
- };
-
- memory-controller at 2b0a0000 {
- compatible = "arm,pl341", "arm,primecell";
- reg = <0 0x2b0a0000 0 0x1000>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- };
-
- gic: interrupt-controller at 2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0 0x2c001000 0 0x1000>,
- <0 0x2c002000 0 0x2000>,
- <0 0x2c004000 0 0x2000>,
- <0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- cci at 2c090000 {
- compatible = "arm,cci-400";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0x2c090000 0 0x1000>;
- ranges = <0x0 0x0 0x2c090000 0x10000>;
-
- cci_control1: slave-if at 4000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace";
- reg = <0x4000 0x1000>;
- };
-
- cci_control2: slave-if at 5000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace";
- reg = <0x5000 0x1000>;
- };
-
- pmu at 9000 {
- compatible = "arm,cci-400-pmu,r0";
- reg = <0x9000 0x5000>;
- interrupts = <0 105 4>,
- <0 101 4>,
- <0 102 4>,
- <0 103 4>,
- <0 104 4>;
- };
- };
-
- memory-controller at 7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <0 86 4>,
- <0 87 4>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- };
-
- dma at 7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0 0x7ff00000 0 0x1000>;
- interrupts = <0 92 4>,
- <0 88 4>,
- <0 89 4>,
- <0 90 4>,
- <0 91 4>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- };
-
- scc at 7fff0000 {
- compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
- reg = <0 0x7fff0000 0 0x1000>;
- interrupts = <0 95 4>;
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
- };
-
- pmu-a15 {
- compatible = "arm,cortex-a15-pmu";
- interrupts = <0 68 4>,
- <0 69 4>;
- interrupt-affinity = <&cpu0>,
- <&cpu1>;
- };
-
- pmu-a7 {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <0 128 4>,
- <0 129 4>,
- <0 130 4>;
- interrupt-affinity = <&cpu2>,
- <&cpu3>,
- <&cpu4>;
- };
-
- oscclk6a: oscclk6a {
- /* Reference 24MHz clock */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "oscclk6a";
- };
-
- dcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* A15 PLL 0 reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <17000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk0";
- };
-
- oscclk1 {
- /* A15 PLL 1 reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <17000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk1";
- };
-
- oscclk2 {
- /* A7 PLL 0 reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <17000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk2";
- };
-
- oscclk3 {
- /* A7 PLL 1 reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 3>;
- freq-range = <17000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk3";
- };
-
- oscclk4 {
- /* External AXI master clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 4>;
- freq-range = <20000000 40000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk4";
- };
-
- hdlcd_clk: oscclk5 {
- /* HDLCD PLL reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 5>;
- freq-range = <23750000 165000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk5";
- };
-
- smbclk: oscclk6 {
- /* Static memory controller clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 6>;
- freq-range = <20000000 40000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk6";
- };
-
- oscclk7 {
- /* SYS PLL reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 7>;
- freq-range = <17000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk7";
- };
-
- oscclk8 {
- /* DDR2 PLL reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 8>;
- freq-range = <20000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk8";
- };
-
- volt-a15 {
- /* A15 CPU core voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "A15 Vcore";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- label = "A15 Vcore";
- };
-
- volt-a7 {
- /* A7 CPU core voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 1>;
- regulator-name = "A7 Vcore";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- label = "A7 Vcore";
- };
-
- amp-a15 {
- /* Total current for the two A15 cores */
- compatible = "arm,vexpress-amp";
- arm,vexpress-sysreg,func = <3 0>;
- label = "A15 Icore";
- };
-
- amp-a7 {
- /* Total current for the three A7 cores */
- compatible = "arm,vexpress-amp";
- arm,vexpress-sysreg,func = <3 1>;
- label = "A7 Icore";
- };
-
- temp-dcc {
- /* DCC internal temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "DCC";
- };
-
- power-a15 {
- /* Total power for the two A15 cores */
- compatible = "arm,vexpress-power";
- arm,vexpress-sysreg,func = <12 0>;
- label = "A15 Pcore";
- };
-
- power-a7 {
- /* Total power for the three A7 cores */
- compatible = "arm,vexpress-power";
- arm,vexpress-sysreg,func = <12 1>;
- label = "A7 Pcore";
- };
-
- energy-a15 {
- /* Total energy for the two A15 cores */
- compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 0>, <13 1>;
- label = "A15 Jcore";
- };
-
- energy-a7 {
- /* Total energy for the three A7 cores */
- compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 2>, <13 3>;
- label = "A7 Jcore";
- };
- };
-
- etb at 20010000 {
- compatible = "arm,coresight-etb10", "arm,primecell";
- reg = <0 0x20010000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- in-ports {
- port {
- etb_in_port: endpoint {
- remote-endpoint = <&replicator_out_port0>;
- };
- };
- };
- };
-
- tpiu at 20030000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0 0x20030000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- in-ports {
- port {
- tpiu_in_port: endpoint {
- remote-endpoint = <&replicator_out_port1>;
- };
- };
- };
- };
-
- replicator {
- /* non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell".
- */
- compatible = "arm,coresight-replicator";
-
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- replicator_out_port0: endpoint {
- remote-endpoint = <&etb_in_port>;
- };
- };
-
- port at 1 {
- reg = <1>;
- replicator_out_port1: endpoint {
- remote-endpoint = <&tpiu_in_port>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in_port0: endpoint {
- remote-endpoint = <&funnel_out_port0>;
- };
- };
- };
- };
-
- funnel at 20040000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
- reg = <0 0x20040000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- funnel_out_port0: endpoint {
- remote-endpoint =
- <&replicator_in_port0>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- funnel_in_port0: endpoint {
- remote-endpoint = <&ptm0_out_port>;
- };
- };
-
- port at 1 {
- reg = <1>;
- funnel_in_port1: endpoint {
- remote-endpoint = <&ptm1_out_port>;
- };
- };
-
- port at 2 {
- reg = <2>;
- funnel_in_port2: endpoint {
- remote-endpoint = <&etm0_out_port>;
- };
- };
-
- /* Input port #3 is for ITM, not supported here */
-
- port at 4 {
- reg = <4>;
- funnel_in_port4: endpoint {
- remote-endpoint = <&etm1_out_port>;
- };
- };
-
- port at 5 {
- reg = <5>;
- funnel_in_port5: endpoint {
- remote-endpoint = <&etm2_out_port>;
- };
- };
- };
- };
-
- ptm at 2201c000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2201c000 0 0x1000>;
-
- cpu = <&cpu0>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
- };
- };
- };
- };
-
- ptm at 2201d000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2201d000 0 0x1000>;
-
- cpu = <&cpu1>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
- };
- };
- };
- };
-
- etm at 2203c000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2203c000 0 0x1000>;
-
- cpu = <&cpu2>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port2>;
- };
- };
- };
- };
-
- etm at 2203d000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2203d000 0 0x1000>;
-
- cpu = <&cpu3>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port4>;
- };
- };
- };
- };
-
- etm at 2203e000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2203e000 0 0x1000>;
-
- cpu = <&cpu4>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- etm2_out_port: endpoint {
- remote-endpoint = <&funnel_in_port5>;
- };
- };
- };
- };
-
- smb: smb at 8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
- };
-
- site2: hsb at 40000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0x40000000 0x3fef0000>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 3>;
- interrupt-map = <0 0 &gic 0 36 4>,
- <0 1 &gic 0 37 4>,
- <0 2 &gic 0 38 4>,
- <0 3 &gic 0 39 4>;
- };
-};
diff --git a/arch/arm/dts/vexpress-v2p-ca5s.dts b/arch/arm/dts/vexpress-v2p-ca5s.dts
deleted file mode 100644
index d5b47d526f9e..000000000000
--- a/arch/arm/dts/vexpress-v2p-ca5s.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A5x2
- * Cortex-A5 MPCore (V2P-CA5s)
- *
- * HBI-0225B
- */
-
-/dts-v1/;
-#include "vexpress-v2m-rs1.dtsi"
-
-/ {
- model = "V2P-CA5s";
- arm,hbi = <0x225>;
- arm,vexpress,site = <0xf>;
- compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- i2c0 = &v2m_i2c_dvi;
- i2c1 = &v2m_i2c_pcie;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu at 0 {
- device_type = "cpu";
- compatible = "arm,cortex-a5";
- reg = <0>;
- next-level-cache = <&L2>;
- };
-
- cpu at 1 {
- device_type = "cpu";
- compatible = "arm,cortex-a5";
- reg = <1>;
- next-level-cache = <&L2>;
- };
- };
-
- memory at 80000000 {
- device_type = "memory";
- reg = <0x80000000 0x40000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* Chipselect 2 is physically at 0x18000000 */
- vram: vram at 18000000 {
- /* 8 MB of designated video RAM */
- compatible = "shared-dma-pool";
- reg = <0x18000000 0x00800000>;
- no-map;
- };
- };
-
- hdlcd at 2a110000 {
- compatible = "arm,hdlcd";
- reg = <0x2a110000 0x1000>;
- interrupts = <0 85 4>;
- clocks = <&hdlcd_clk>;
- clock-names = "pxlclk";
- };
-
- memory-controller at 2a150000 {
- compatible = "arm,pl341", "arm,primecell";
- reg = <0x2a150000 0x1000>;
- clocks = <&axi_clk>;
- clock-names = "apb_pclk";
- };
-
- memory-controller at 2a190000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0x2a190000 0x1000>;
- interrupts = <0 86 4>,
- <0 87 4>;
- clocks = <&axi_clk>;
- clock-names = "apb_pclk";
- };
-
- scu at 2c000000 {
- compatible = "arm,cortex-a5-scu";
- reg = <0x2c000000 0x58>;
- };
-
- timer at 2c000600 {
- compatible = "arm,cortex-a5-twd-timer";
- reg = <0x2c000600 0x20>;
- interrupts = <1 13 0x304>;
- };
-
- timer at 2c000200 {
- compatible = "arm,cortex-a5-global-timer",
- "arm,cortex-a9-global-timer";
- reg = <0x2c000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&cpu_clk>;
- };
-
- watchdog at 2c000620 {
- compatible = "arm,cortex-a5-twd-wdt";
- reg = <0x2c000620 0x20>;
- interrupts = <1 14 0x304>;
- };
-
- gic: interrupt-controller at 2c001000 {
- compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x2c001000 0x1000>,
- <0x2c000100 0x100>;
- };
-
- L2: cache-controller at 2c0f0000 {
- compatible = "arm,pl310-cache";
- reg = <0x2c0f0000 0x1000>;
- interrupts = <0 84 4>;
- cache-level = <2>;
- };
-
- pmu {
- compatible = "arm,cortex-a5-pmu";
- interrupts = <0 68 4>,
- <0 69 4>;
- };
-
- dcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- cpu_clk: oscclk0 {
- /* CPU and internal AXI reference clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <50000000 100000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk0";
- };
-
- axi_clk: oscclk1 {
- /* Multiplexed AXI master clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <5000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk1";
- };
-
- oscclk2 {
- /* DDR2 */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <80000000 120000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk2";
- };
-
- hdlcd_clk: oscclk3 {
- /* HDLCD */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 3>;
- freq-range = <23750000 165000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk3";
- };
-
- oscclk4 {
- /* Test chip gate configuration */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 4>;
- freq-range = <80000000 80000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk4";
- };
-
- smbclk: oscclk5 {
- /* SMB clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 5>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "oscclk5";
- };
-
- temp-dcc {
- /* DCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "DCC";
- };
- };
-
- smb: smb at 8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x08000000 0x04000000>,
- <1 0 0x14000000 0x04000000>,
- <2 0 0x18000000 0x04000000>,
- <3 0 0x1c000000 0x04000000>,
- <4 0 0x0c000000 0x04000000>,
- <5 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
- };
-
- site2: hsb at 40000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x40000000 0x40000000>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 3>;
- interrupt-map = <0 0 &gic 0 36 4>,
- <0 1 &gic 0 37 4>,
- <0 2 &gic 0 38 4>,
- <0 3 &gic 0 39 4>;
- };
-};
diff --git a/arch/arm/dts/vexpress-v2p-ca9.dts b/arch/arm/dts/vexpress-v2p-ca9.dts
deleted file mode 100644
index d796efaadbe3..000000000000
--- a/arch/arm/dts/vexpress-v2p-ca9.dts
+++ /dev/null
@@ -1,368 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A9x4
- * Cortex-A9 MPCore (V2P-CA9)
- *
- * HBI-0191B
- */
-
-/dts-v1/;
-#include "vexpress-v2m.dtsi"
-
-/ {
- model = "V2P-CA9";
- arm,hbi = <0x191>;
- arm,vexpress,site = <0xf>;
- compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- i2c0 = &v2m_i2c_dvi;
- i2c1 = &v2m_i2c_pcie;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- A9_0: cpu at 0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- next-level-cache = <&L2>;
- };
-
- A9_1: cpu at 1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- next-level-cache = <&L2>;
- };
-
- A9_2: cpu at 2 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <2>;
- next-level-cache = <&L2>;
- };
-
- A9_3: cpu at 3 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <3>;
- next-level-cache = <&L2>;
- };
- };
-
- memory at 60000000 {
- device_type = "memory";
- reg = <0x60000000 0x40000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* Chipselect 3 is physically at 0x4c000000 */
- vram: vram at 4c000000 {
- /* 8 MB of designated video RAM */
- compatible = "shared-dma-pool";
- reg = <0x4c000000 0x00800000>;
- no-map;
- };
- };
-
- clcd at 10020000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x10020000 0x1000>;
- interrupt-names = "combined";
- interrupts = <0 44 4>;
- clocks = <&oscclk1>, <&oscclk2>;
- clock-names = "clcdclk", "apb_pclk";
- /* 1024x768 16bpp @65MHz */
- max-memory-bandwidth = <95000000>;
-
- port {
- clcd_pads_ct: endpoint {
- remote-endpoint = <&dvi_bridge_in_ct>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
- };
- };
-
- memory-controller at 100e0000 {
- compatible = "arm,pl341", "arm,primecell";
- reg = <0x100e0000 0x1000>;
- clocks = <&oscclk2>;
- clock-names = "apb_pclk";
- };
-
- memory-controller at 100e1000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0x100e1000 0x1000>;
- interrupts = <0 45 4>,
- <0 46 4>;
- clocks = <&oscclk2>;
- clock-names = "apb_pclk";
- };
-
- timer at 100e4000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x100e4000 0x1000>;
- interrupts = <0 48 4>,
- <0 49 4>;
- clocks = <&oscclk2>, <&oscclk2>;
- clock-names = "timclk", "apb_pclk";
- status = "disabled";
- };
-
- watchdog at 100e5000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x100e5000 0x1000>;
- interrupts = <0 51 4>;
- clocks = <&oscclk2>, <&oscclk2>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- scu at 1e000000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x1e000000 0x58>;
- };
-
- timer at 1e000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x1e000600 0x20>;
- interrupts = <1 13 0xf04>;
- };
-
- watchdog at 1e000620 {
- compatible = "arm,cortex-a9-twd-wdt";
- reg = <0x1e000620 0x20>;
- interrupts = <1 14 0xf04>;
- };
-
- gic: interrupt-controller at 1e001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1e001000 0x1000>,
- <0x1e000100 0x100>;
- };
-
- L2: cache-controller at 1e00a000 {
- compatible = "arm,pl310-cache";
- reg = <0x1e00a000 0x1000>;
- interrupts = <0 43 4>;
- cache-unified;
- cache-level = <2>;
- arm,data-latency = <1 1 1>;
- arm,tag-latency = <1 1 1>;
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
-
- };
-
- dcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0: extsaxiclk {
- /* ACLK clock to the AXI master port on the test chip */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <30000000 50000000>;
- #clock-cells = <0>;
- clock-output-names = "extsaxiclk";
- };
-
- oscclk1: clcdclk {
- /* Reference clock for the CLCD */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <10000000 80000000>;
- #clock-cells = <0>;
- clock-output-names = "clcdclk";
- };
-
- smbclk: oscclk2: tcrefclk {
- /* Reference clock for the test chip internal PLLs */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <33000000 100000000>;
- #clock-cells = <0>;
- clock-output-names = "tcrefclk";
- };
-
- volt-vd10 {
- /* Test Chip internal logic voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VD10";
- regulator-always-on;
- label = "VD10";
- };
-
- volt-vd10-s2 {
- /* PL310, L2 cache, RAM cell supply (not PL310 logic) */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 1>;
- regulator-name = "VD10_S2";
- regulator-always-on;
- label = "VD10_S2";
- };
-
- volt-vd10-s3 {
- /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 2>;
- regulator-name = "VD10_S3";
- regulator-always-on;
- label = "VD10_S3";
- };
-
- volt-vcc1v8 {
- /* DDR2 SDRAM and Test Chip DDR2 I/O supply */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 3>;
- regulator-name = "VCC1V8";
- regulator-always-on;
- label = "VCC1V8";
- };
-
- volt-ddr2vtt {
- /* DDR2 SDRAM VTT termination voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 4>;
- regulator-name = "DDR2VTT";
- regulator-always-on;
- label = "DDR2VTT";
- };
-
- volt-vcc3v3 {
- /* Local board supply for miscellaneous logic external to the Test Chip */
- arm,vexpress-sysreg,func = <2 5>;
- compatible = "arm,vexpress-volt";
- regulator-name = "VCC3V3";
- regulator-always-on;
- label = "VCC3V3";
- };
-
- amp-vd10-s2 {
- /* PL310, L2 cache, RAM cell supply (not PL310 logic) */
- compatible = "arm,vexpress-amp";
- arm,vexpress-sysreg,func = <3 0>;
- label = "VD10_S2";
- };
-
- amp-vd10-s3 {
- /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
- compatible = "arm,vexpress-amp";
- arm,vexpress-sysreg,func = <3 1>;
- label = "VD10_S3";
- };
-
- power-vd10-s2 {
- /* PL310, L2 cache, RAM cell supply (not PL310 logic) */
- compatible = "arm,vexpress-power";
- arm,vexpress-sysreg,func = <12 0>;
- label = "PVD10_S2";
- };
-
- power-vd10-s3 {
- /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
- compatible = "arm,vexpress-power";
- arm,vexpress-sysreg,func = <12 1>;
- label = "PVD10_S3";
- };
- };
-
- smb: smb at 4000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x40000000 0x04000000>,
- <1 0 0x44000000 0x04000000>,
- <2 0 0x48000000 0x04000000>,
- <3 0 0x4c000000 0x04000000>,
- <7 0 0x10000000 0x00020000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
- };
-
- site2: hsb at e0000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xe0000000 0x20000000>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 3>;
- interrupt-map = <0 0 &gic 0 36 4>,
- <0 1 &gic 0 37 4>,
- <0 2 &gic 0 38 4>,
- <0 3 &gic 0 39 4>;
- };
-};
diff --git a/board/armltd/vexpress/Kconfig b/board/armltd/vexpress/Kconfig
deleted file mode 100644
index 2e15e0d4975f..000000000000
--- a/board/armltd/vexpress/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-if TARGET_VEXPRESS_CA15_TC2
-
-config SYS_BOARD
- default "vexpress"
-
-config SYS_VENDOR
- default "armltd"
-
-config SYS_CONFIG_NAME
- default "vexpress_ca15_tc2"
-
-endif
-
-if TARGET_VEXPRESS_CA5X2
-
-config SYS_BOARD
- default "vexpress"
-
-config SYS_VENDOR
- default "armltd"
-
-config SYS_CONFIG_NAME
- default "vexpress_ca5x2"
-
-endif
-
-if TARGET_VEXPRESS_CA9X4
-
-config SYS_BOARD
- default "vexpress"
-
-config SYS_VENDOR
- default "armltd"
-
-config SYS_CONFIG_NAME
- default "vexpress_ca9x4"
-
-endif
diff --git a/board/armltd/vexpress/MAINTAINERS b/board/armltd/vexpress/MAINTAINERS
deleted file mode 100644
index 7b3fb42e5651..000000000000
--- a/board/armltd/vexpress/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-VERSATILE EXPRESS BOARDS
-M: Linus Walleij <linus.walleij at linaro.org>
-S: Maintained
-F: board/armltd/vexpress/
-F: include/configs/vexpress_ca15_tc2.h
-F: configs/vexpress_ca15_tc2_defconfig
-F: include/configs/vexpress_ca5x2.h
-F: configs/vexpress_ca5x2_defconfig
-F: include/configs/vexpress_ca9x4.h
-F: configs/vexpress_ca9x4_defconfig
diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
deleted file mode 100644
index 2a659de012ac..000000000000
--- a/board/armltd/vexpress/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y := vexpress_common.o
-obj-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress_tc2.o
diff --git a/board/armltd/vexpress/vexpress_common.c b/board/armltd/vexpress/vexpress_common.c
deleted file mode 100644
index 8fea8ff35294..000000000000
--- a/board/armltd/vexpress/vexpress_common.c
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij at ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin at arm.com>
- */
-#include <common.h>
-#include <bootstage.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <malloc.h>
-#include <errno.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/arch/systimer.h>
-#include <asm/arch/sysctrl.h>
-#include <asm/arch/wdt.h>
-#include "../drivers/mmc/arm_pl180_mmci.h"
-
-static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01;
-static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
-
-static void flash__init(void);
-static void vexpress_timer_init(void);
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-static inline void delay(ulong loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
- gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS;
-
- icache_enable();
- flash__init();
- vexpress_timer_init();
-
- return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
-
-int cpu_mmc_init(struct bd_info *bis)
-{
- int rc = 0;
- (void) bis;
-#ifdef CONFIG_ARM_PL180_MMCI
- struct pl180_mmc_host *host;
- struct mmc *mmc;
-
- host = malloc(sizeof(struct pl180_mmc_host));
- if (!host)
- return -ENOMEM;
- memset(host, 0, sizeof(*host));
-
- strcpy(host->name, "MMC");
- host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
- host->pwr_init = INIT_PWR;
- host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
- host->voltages = VOLTAGE_WINDOW_MMC;
- host->caps = 0;
- host->clock_in = ARM_MCLK;
- host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
- host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
- rc = arm_pl180_mmci_init(host, &mmc);
-#endif
- return rc;
-}
-
-static void flash__init(void)
-{
- /* Setup the sytem control register to allow writing to flash */
- writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN,
- &sysctrl_base->scflashctrl);
-}
-
-int dram_init(void)
-{
- gd->ram_size =
- get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size =
- get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size =
- get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
- return 0;
-}
-
-/*
- * Start timer:
- * Setup a 32 bit timer, running at 1KHz
- * Versatile Express Motherboard provides 1 MHz timer
- */
-static void vexpress_timer_init(void)
-{
- /*
- * Set clock frequency in system controller:
- * VEXPRESS_REFCLK is 32KHz
- * VEXPRESS_TIMCLK is 1MHz
- */
- writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL |
- SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL |
- readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl);
-
- /*
- * Set Timer0 to be:
- * Enabled, free running, no interrupt, 32-bit, wrapping
- */
- writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
- writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
- writel(SYSTIMER_EN | SYSTIMER_32BIT |
- readl(&systimer_base->timer0control),
- &systimer_base->timer0control);
-}
-
-int v2m_cfg_write(u32 devfn, u32 data)
-{
- /* Configuration interface broken? */
- u32 val;
-
- devfn |= SYS_CFG_START | SYS_CFG_WRITE;
-
- val = readl(V2M_SYS_CFGSTAT);
- writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT);
-
- writel(data, V2M_SYS_CFGDATA);
- writel(devfn, V2M_SYS_CFGCTRL);
-
- do {
- val = readl(V2M_SYS_CFGSTAT);
- } while (val == 0);
-
- return !!(val & SYS_CFG_ERR);
-}
-
-/* Use the ARM Watchdog System to cause reset */
-void reset_cpu(ulong addr)
-{
- if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
- printf("Unable to reboot\n");
-}
-
-void lowlevel_init(void)
-{
-}
-
-ulong get_board_rev(void){
- return readl((u32 *)SYS_ID);
-}
-
-#ifdef CONFIG_ARMV7_NONSEC
-/* Setting the address at which secondary cores start from.
- * Versatile Express uses one address for all cores, so ignore corenr
- */
-void smp_set_core_boot_addr(unsigned long addr, int corenr)
-{
- /* The SYSFLAGS register on VExpress needs to be cleared first
- * by writing to the next address, since any writes to the address
- * at offset 0 will only be ORed in
- */
- writel(~0, CONFIG_SYSFLAGS_ADDR + 4);
- writel(addr, CONFIG_SYSFLAGS_ADDR);
-}
-#endif
diff --git a/board/armltd/vexpress/vexpress_tc2.c b/board/armltd/vexpress/vexpress_tc2.c
deleted file mode 100644
index 8ee24bdde731..000000000000
--- a/board/armltd/vexpress/vexpress_tc2.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Linaro
- * Jon Medhurst <tixy at linaro.org>
- *
- * TC2 specific code for Versatile Express.
- */
-
-#include <asm/armv7.h>
-#include <asm/io.h>
-#include <asm/u-boot.h>
-#include <common.h>
-#include <linux/libfdt.h>
-
-#define SCC_BASE 0x7fff0000
-
-bool armv7_boot_nonsec_default(void)
-{
-#ifdef CONFIG_ARMV7_BOOT_SEC_DEFAULT
- return false;
-#else
- /*
- * The Serial Configuration Controller (SCC) register at address 0x700
- * contains flags for configuring the behaviour of the Boot Monitor
- * (which CPUs execute from reset). Two of these bits are of interest:
- *
- * bit 12 = Use per-cpu mailboxes for power management
- * bit 13 = Power down the non-boot cluster
- *
- * It is only when both of these are false that U-Boot's current
- * implementation of 'nonsec' mode can work as expected because we
- * rely on getting all CPUs to execute _nonsec_init, so let's check that.
- */
- return (readl((u32 *)(SCC_BASE + 0x700)) & ((1 << 12) | (1 << 13))) == 0;
-#endif
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *fdt, struct bd_info *bd)
-{
- int offset, tmp, len;
- const struct fdt_property *prop;
- const char *cci_compatible = "arm,cci-400-ctrl-if";
-
-#ifdef CONFIG_ARMV7_NONSEC
- if (!armv7_boot_nonsec())
- return 0;
-#else
- return 0;
-#endif
- /* Booting in nonsec mode, disable CCI access */
- offset = fdt_path_offset(fdt, "/cpus");
- if (offset < 0) {
- printf("couldn't find /cpus\n");
- return offset;
- }
-
- /* delete cci-control-port in each cpu node */
- for (tmp = fdt_first_subnode(fdt, offset); tmp >= 0;
- tmp = fdt_next_subnode(fdt, tmp))
- fdt_delprop(fdt, tmp, "cci-control-port");
-
- /* disable all ace cci slave ports */
- offset = fdt_node_offset_by_prop_value(fdt, offset, "compatible",
- cci_compatible, 20);
- while (offset > 0) {
- prop = fdt_get_property(fdt, offset, "interface-type",
- &len);
- if (!prop)
- continue;
- if (len < 4)
- continue;
- if (strcmp(prop->data, "ace"))
- continue;
-
- fdt_setprop_string(fdt, offset, "status", "disabled");
-
- offset = fdt_node_offset_by_prop_value(fdt, offset, "compatible",
- cci_compatible, 20);
- }
-
- return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/configs/vexpress_ca15_tc2_defconfig b/configs/vexpress_ca15_tc2_defconfig
deleted file mode 100644
index e8e401b17903..000000000000
--- a/configs/vexpress_ca15_tc2_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_CA15_TC2=y
-CONFIG_SYS_TEXT_BASE=0x80800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xFF80000
-CONFIG_ARM_PL180_MMCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x1a000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/vexpress_ca5x2_defconfig b/configs/vexpress_ca5x2_defconfig
deleted file mode 100644
index 88027b940bae..000000000000
--- a/configs/vexpress_ca5x2_defconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_CA5X2=y
-CONFIG_SYS_TEXT_BASE=0x80800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xFF80000
-CONFIG_ARM_PL180_MMCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x1a000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig
deleted file mode 100644
index 7b148450e567..000000000000
--- a/configs/vexpress_ca9x4_defconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_CA9X4=y
-CONFIG_SYS_TEXT_BASE=0x60800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
-CONFIG_DEFAULT_FDT_FILE="vexpress-v2p-ca9.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x47F80000
-CONFIG_ARM_PL180_MMCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x4e000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 403602fddff2..367004b15bc7 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -458,7 +458,7 @@ config SYS_I2C_UNIPHIER_F
config SYS_I2C_VERSATILE
bool "Arm Ltd Versatile I2C bus driver"
- depends on DM_I2C && (TARGET_VEXPRESS_CA15_TC2 || TARGET_VEXPRESS64_JUNO)
+ depends on DM_I2C && TARGET_VEXPRESS64_JUNO
help
Add support for the Arm Ltd Versatile Express I2C driver. The I2C host
controller is present in the development boards manufactured by Arm Ltd.
diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h
deleted file mode 100644
index 4f8e63574dfb..000000000000
--- a/include/configs/vexpress_ca15_tc2.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 Linaro
- * Andre Przywara, <andre.przywara at linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- */
-
-#ifndef __VEXPRESS_CA15X2_TC2_h
-#define __VEXPRESS_CA15X2_TC2_h
-
-#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
-#include "vexpress_common.h"
-
-#define CONFIG_SYSFLAGS_ADDR 0x1c010030
-#define CONFIG_SMP_PEN_ADDR CONFIG_SYSFLAGS_ADDR
-
-#endif
diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h
deleted file mode 100644
index b8079e63d666..000000000000
--- a/include/configs/vexpress_ca5x2.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011 Linaro
- * Ryan Harkin, <ryan.harkin at linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- */
-
-#ifndef __VEXPRESS_CA5X2_h
-#define __VEXPRESS_CA5X2_h
-
-#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
-#include "vexpress_common.h"
-
-#endif /* __VEXPRESS_CA5X2_h */
diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h
deleted file mode 100644
index 8157a5868d65..000000000000
--- a/include/configs/vexpress_ca9x4.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011 Linaro
- * Ryan Harkin, <ryan.harkin at linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- */
-
-#ifndef __VEXPRESS_CA9X4_H
-#define __VEXPRESS_CA9X4_H
-
-#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
-#include "vexpress_common.h"
-
-#endif /* VEXPRESS_CA9X4_H */
--
2.17.1
More information about the U-Boot
mailing list