[PATCH] arm: dts: stm32mp15: remove duplicate uart nodes

[Patrice CHOTARD]

Hi Patrick

On 2/24/21 11:00 AM, Patrick Delaunay wrote:
> Remove duplicated uart nodes introduced with commit 62f95af92a3f
> ("ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4"),
> because the uart nodes wasn't correctly ordered in alphabetic order.
> 
> Only cosmetic: the generated device tree don't change.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/dts/stm32mp15-pinctrl.dtsi | 80 -----------------------------
>  1 file changed, 80 deletions(-)
> 
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index dd4bd1e554..20a59e8f7a 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -1971,86 +1971,6 @@
>  		};
>  	};
>  
> -	uart4_pins_a: uart4-0 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <0>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> -			bias-disable;
> -		};
> -	};
> -
> -	uart4_pins_b: uart4-1 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <0>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> -			bias-disable;
> -		};
> -	};
> -
> -	uart4_pins_c: uart4-2 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <0>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> -			bias-disable;
> -		};
> -	};
> -
> -	uart7_pins_a: uart7-0 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <0>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
> -				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
> -				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
> -			bias-disable;
> -		};
> -	};
> -
> -	uart7_pins_b: uart7-1 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <0>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
> -			bias-disable;
> -		};
> -	};
> -
> -	uart8_pins_a: uart8-0 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <0>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
> -			bias-disable;
> -		};
> -	};
> -
>  	usbotg_hs_pins_a: usbotg-hs-0 {
>  		pins {
>  			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
> 

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks

Patrice