[PATCH] arm: dts: stm32mp15: remove duplicate uart nodes

[Patrick Delaunay]

Remove duplicated uart nodes introduced with commit 62f95af92a3f
("ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4"),
because the uart nodes wasn't correctly ordered in alphabetic order.

Only cosmetic: the generated device tree don't change.

Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---

 arch/arm/dts/stm32mp15-pinctrl.dtsi | 80 -----------------------------
 1 file changed, 80 deletions(-)

diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index dd4bd1e554..20a59e8f7a 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1971,86 +1971,6 @@
 		};
 	};
 
-	uart4_pins_a: uart4-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_pins_b: uart4-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_pins_c: uart4-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart7_pins_a: uart7-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
-			bias-disable;
-		};
-	};
-
-	uart7_pins_b: uart7-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
-			bias-disable;
-		};
-	};
-
-	uart8_pins_a: uart8-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
-			bias-disable;
-		};
-	};
-
 	usbotg_hs_pins_a: usbotg-hs-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
-- 
2.17.1