Subject: [PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x

[Priyanka Jain (OSS)]

>-----Original Message-----
>From: Aleksandar Gerasimovski <aleksandar.gerasimovski at hitachi-
>powergrids.com>
>Sent: Tuesday, January 19, 2021 4:11 PM
>To: Priyanka Jain (OSS) <priyanka.jain at oss.nxp.com>; u-boot at lists.denx.de
>Cc: Valentin Longchamp <valentin.longchamp at hitachi-powergrids.com>; Holger
>Brunck <holger.brunck at hitachi-powergrids.com>; Rainer Boschung
><rainer.boschung at hitachi-powergrids.com>; Matteo Ghidoni
><matteo.ghidoni at hitachi-powergrids.com>
>Subject: Subject: [PATCH v2 4/4] board/km: add support for seli8 design based on
>nxp ls102x
>
>The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and
>FOX product lines.
>
>It is based on NXP LS1021 SoC and it provides following interfaces:
> - IFC interface for NOR, NAND and external FPGA's
> - 1 x RGMII ETH for debug purposes
> - 2 x SGMII ETH for management communication via back-plane
> - 1 x uQE HDLC for management communication via back-plane
> - 1 x I2C for peripheral devices
> - 1 x SPI for peripheral devices
> - 1 x UART for debug logging
>
>It is foreseen that the design will be later re-used for another XMC and FOX
>service cards with similar SoC requirements.
>
>Signed-off-by: Rainer Boschung <rainer.boschung at hitachi-powergrids.com>
>Signed-off-by: Matteo Ghidoni <matteo.ghidoni at hitachi-powergrids.com>
>Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski at hitachi-
>powergrids.com>
>---
<snip>
Kindly fix below checkpatch errors /warnings
WARNING: 'AYSNC' may be misspelled - perhaps 'ASYNC'?
#799: FILE: include/configs/km/pg-wcom-ls102xa.h:64:
+                                       CSOR_NOR_NOR_MODE_AYSNC_NOR | \

ERROR: All commands are managed by Kconfig
#953: FILE: include/configs/km/pg-wcom-ls102xa.h:218:
+#define CONFIG_CMDLINE_TAG

total: 1 errors, 2 warnings, 0 checks, 964 lines checked

Regards
Priyanka