[v4 07/33] arm64: dts: ls1088a: add gpio node

Biwen Li biwen.li at oss.nxp.com
Tue Feb 2 09:25:52 CET 2021


From: Biwen Li <biwen.li at nxp.com>

Add gpio node for SoC LS1088A

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
 arch/arm/dts/fsl-ls1088a.dtsi | 47 ++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 7b4ac6d3de..64caa600ad 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -2,9 +2,10 @@
 /*
  * NXP ls1088a SOC common device tree source
  *
- * Copyright 2017, 2020 NXP
+ * Copyright 2017, 2020-2021 NXP
  */
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	compatible = "fsl,ls1088a";
 	interrupt-parent = <&gic>;
@@ -115,6 +116,50 @@
 		bus-width = <4>;
 	};
 
+	gpio0: gpio at 2300000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio at 2310000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio at 2320000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio at 2330000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	ifc: ifc at 1530000 {
 		compatible = "fsl,ifc", "simple-bus";
 		reg = <0x0 0x2240000 0x0 0x20000>;
-- 
2.17.1



More information about the U-Boot mailing list