[PATCH 16/57] arm: Remove picosam9g45 board
Tom Rini
trini at konsulko.com
Sun Feb 21 02:05:53 CET 2021
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Erik van Luijk <evanluijk at interact.nl>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/mach-at91/Kconfig | 6 -
board/mini-box/picosam9g45/Kconfig | 12 -
board/mini-box/picosam9g45/MAINTAINERS | 6 -
board/mini-box/picosam9g45/Makefile | 17 --
board/mini-box/picosam9g45/led.c | 22 --
board/mini-box/picosam9g45/picosam9g45.c | 347 -----------------------
configs/picosam9g45_defconfig | 48 ----
include/configs/picosam9g45.h | 118 --------
8 files changed, 576 deletions(-)
delete mode 100644 board/mini-box/picosam9g45/Kconfig
delete mode 100644 board/mini-box/picosam9g45/MAINTAINERS
delete mode 100644 board/mini-box/picosam9g45/Makefile
delete mode 100644 board/mini-box/picosam9g45/led.c
delete mode 100644 board/mini-box/picosam9g45/picosam9g45.c
delete mode 100644 configs/picosam9g45_defconfig
delete mode 100644 include/configs/picosam9g45.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22f6e4114e8e..1adf09b9a148 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -134,11 +134,6 @@ config TARGET_PM9G45
bool "Ronetix pm9g45 board"
select AT91SAM9G45
-config TARGET_PICOSAM9G45
- bool "Mini-box picosam9g45 board"
- select AT91SAM9M10G45
- select SUPPORT_SPL
-
config TARGET_AT91SAM9N12EK
bool "Atmel AT91SAM9N12-EK board"
select AT91SAM9N12
@@ -338,7 +333,6 @@ source "board/egnite/ethernut5/Kconfig"
source "board/esd/meesc/Kconfig"
source "board/gardena/smart-gateway-at91sam/Kconfig"
source "board/l+g/vinco/Kconfig"
-source "board/mini-box/picosam9g45/Kconfig"
source "board/ronetix/pm9261/Kconfig"
source "board/ronetix/pm9263/Kconfig"
source "board/ronetix/pm9g45/Kconfig"
diff --git a/board/mini-box/picosam9g45/Kconfig b/board/mini-box/picosam9g45/Kconfig
deleted file mode 100644
index 98ec0c457a62..000000000000
--- a/board/mini-box/picosam9g45/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PICOSAM9G45
-
-config SYS_BOARD
- default "picosam9g45"
-
-config SYS_VENDOR
- default "mini-box"
-
-config SYS_CONFIG_NAME
- default "picosam9g45"
-
-endif
diff --git a/board/mini-box/picosam9g45/MAINTAINERS b/board/mini-box/picosam9g45/MAINTAINERS
deleted file mode 100644
index a8cf01d70380..000000000000
--- a/board/mini-box/picosam9g45/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PICOSAM9G45 BOARD
-M: Erik van Luijk <evanluijk at interact.nl>
-S: Maintained
-F: board/mini-box/picosam9g45/
-F: include/configs/picosam9g45.h
-F: configs/picosam9g45_defconfig
diff --git a/board/mini-box/picosam9g45/Makefile b/board/mini-box/picosam9g45/Makefile
deleted file mode 100644
index 6e98997a7c31..000000000000
--- a/board/mini-box/picosam9g45/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Makefile for mini-box PICOSAM9G45 (AT91SAM9G45) based board
-# (C) Copytight 2015 Inter Act B.V.
-#
-# Based on:
-# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian at popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-
-obj-y += picosam9g45.o
-obj-y += led.o
diff --git a/board/mini-box/picosam9g45/led.c b/board/mini-box/picosam9g45/led.c
deleted file mode 100644
index 8ce8b6bbeac2..000000000000
--- a/board/mini-box/picosam9g45/led.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian at popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/io.h>
-#include <asm/arch/at91sam9g45.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-
-void coloured_LED_init(void)
-{
- at91_periph_clk_enable(ATMEL_ID_PIODE);
-
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-}
diff --git a/board/mini-box/picosam9g45/picosam9g45.c b/board/mini-box/picosam9g45/picosam9g45.c
deleted file mode 100644
index 5d6cb24966d6..000000000000
--- a/board/mini-box/picosam9g45/picosam9g45.c
+++ /dev/null
@@ -1,347 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Board functions for mini-box PICOSAM9G45 (AT91SAM9G45) based board
- * (C) Copyright 2015 Inter Act B.V.
- *
- * Based on:
- * U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian at popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <vsprintf.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/at91sam9g45_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/clk.h>
-#include <lcd.h>
-#include <linux/mtd/rawnand.h>
-#include <atmel_lcdc.h>
-#include <atmel_mci.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#if defined(CONFIG_SPL_BUILD)
-#include <spl.h>
-
-void at91_spl_board_init(void)
-{
-#ifdef CONFIG_SYS_USE_MMC
- at91_mci_hw_init();
-#endif
-}
-
-#include <asm/arch/atmel_mpddrc.h>
-static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
-{
- ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
-
- ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
- ATMEL_MPDDRC_CR_NR_ROW_14 |
- ATMEL_MPDDRC_CR_DQMS_SHARED |
- ATMEL_MPDDRC_CR_CAS_DDR_CAS3);
-
- ddr2->rtr = 0x24b;
-
- ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |/* 6*7.5 = 45 ns */
- 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |/* 2*7.5 = 15 ns */
- 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | /* 2*7.5 = 15 ns */
- 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | /* 8*7.5 = 60 ns */
- 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | /* 2*7.5 = 15 ns */
- 1 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | /* 1*7.5= 7.5 ns*/
- 1 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | /* 1 clk cycle */
- 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); /* 2 clk cycles */
-
- ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | /* 2*7.5 = 15 ns */
- 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
- 16 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
- 14 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
-
- ddr2->tpr2 = (1 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
- 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
- 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
- 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
-}
-
-void mem_init(void)
-{
- struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX;
- struct atmel_mpddrc_config ddr2;
- unsigned long csa;
-
- ddr2_conf(&ddr2);
-
- at91_system_clk_enable(AT91_PMC_DDR);
-
- /* Chip select 1 is for DDR2/SDRAM */
- csa = readl(&mat->ebicsa);
- csa |= AT91_MATRIX_EBI_CS1A_SDRAMC;
- csa &= ~AT91_MATRIX_EBI_VDDIOMSEL_3_3V;
- writel(csa, &mat->ebicsa);
-
- /* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2);
- ddr2_init(ATMEL_BASE_DDRSDRC1, ATMEL_BASE_CS1, &ddr2);
-}
-#endif
-
-#ifdef CONFIG_CMD_USB
-static void picosam9g45_usb_hw_init(void)
-{
- at91_periph_clk_enable(ATMEL_ID_PIODE);
-
- at91_set_gpio_output(AT91_PIN_PD1, 0);
- at91_set_gpio_output(AT91_PIN_PD3, 0);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void picosam9g45_macb_hw_init(void)
-{
- struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-
- at91_periph_clk_enable(ATMEL_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PA15) => PHY normal mode (not Test mode)
- * ERX0 (PA12) => PHY ADDR0
- * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA12) |
- pin_to_mask(AT91_PIN_PA13),
- &pioa->pudr);
-
- at91_phy_reset();
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA12) |
- pin_to_mask(AT91_PIN_PA13),
- &pioa->puer);
-
- /* And the pins. */
- at91_macb_hw_init();
-}
-#endif
-
-#ifdef CONFIG_LCD
-
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_sync = ATMEL_LCDC_INVLINE_NORMAL |
- ATMEL_LCDC_INVFRAME_NORMAL,
- .vl_bpix = 3,
- .vl_tft = 1,
- .vl_hsync_len = 45,
- .vl_left_margin = 1,
- .vl_right_margin = 1,
- .vl_vsync_len = 1,
- .vl_upper_margin = 40,
- .vl_lower_margin = 1,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-
-void lcd_enable(void)
-{
- at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */
-}
-
-static void picosam9g45_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
-
- at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
- at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
- at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-
- gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2015 Inter Act B.V.\n");
- lcd_printf("support at interact.nl\n");
- lcd_printf("%s CPU at %s MHz\n",
- ATMEL_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- lcd_printf(" %ld MB SDRAM\n", dram_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-int board_mmc_init(struct bd_info *bis)
-{
- at91_mci_hw_init();
-
- return atmel_mci_init((void *)ATMEL_BASE_MCI0);
-}
-#endif
-
-int board_early_init_f(void)
-{
- at91_seriald_hw_init();
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_PICOSAM9G45;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_CMD_USB
- picosam9g45_usb_hw_init();
-#endif
-#ifdef CONFIG_ATMEL_SPI
- at91_spi0_hw_init(1 << 4);
-#endif
-#ifdef CONFIG_MACB
- picosam9g45_macb_hw_init();
-#endif
-#ifdef CONFIG_LCD
- picosam9g45_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
- PHYS_SDRAM_2_SIZE);
-
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
-#endif
- return rc;
-}
-
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-#include <spi.h>
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs < 2;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- switch (slave->cs) {
- case 1:
- at91_set_gpio_output(AT91_PIN_PB18, 0);
- break;
- case 0:
- default:
- at91_set_gpio_output(AT91_PIN_PB3, 0);
- break;
- }
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- switch (slave->cs) {
- case 1:
- at91_set_gpio_output(AT91_PIN_PB18, 1);
- break;
- case 0:
- default:
- at91_set_gpio_output(AT91_PIN_PB3, 1);
- break;
- }
-}
-#endif /* CONFIG_ATMEL_SPI */
diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig
deleted file mode 100644
index 915c2ba81289..000000000000
--- a/configs/picosam9g45_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x23f00000
-CONFIG_TARGET_PICOSAM9G45=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x4000
-CONFIG_SPL_TEXT_BASE=0x300000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot> "
-# CONFIG_CMD_BDI is not set
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_AT91_GPIO=y
-CONFIG_ATMEL_USART=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_WDT=y
-CONFIG_WDT_AT91=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
deleted file mode 100644
index 77b7ce411f5b..000000000000
--- a/include/configs/picosam9g45.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration settings for the mini-box PICOSAM9G45 board.
- * (C) Copyright 2015 Inter Act B.V.
- *
- * Based on:
- * U-Boot file: include/configs/at91sam9m10g45ek.h
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian at popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/hardware.h>
-
-#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
-
-/* serial console */
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-
-/* LCD */
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#define CONFIG_ATMEL_LCD_RGB565
-/* board specific(not enough SRAM) */
-#define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* SDRAM */
-#define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */
-#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#ifdef CONFIG_SYS_USE_MMC
-/* bootstrap + u-boot + env + linux in mmc */
-
-#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \
- "fatload mmc 0:1 0x22000000 zImage; " \
- "bootz 0x22000000 - 0x21000000"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-/* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE 0x010000
-#define CONFIG_SPL_STACK 0x310000
-
-#define CONFIG_SYS_MONITOR_LEN 0x80000
-
-#ifdef CONFIG_SYS_USE_MMC
-
-#define CONFIG_SPL_BSS_START_ADDR 0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000
-#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
-#define CONFIG_SPL_ATMEL_SIZE
-#define CONFIG_SYS_MASTER_CLOCK 132096000
-#define CONFIG_SYS_AT91_PLLA 0x20c73f03
-#define CONFIG_SYS_MCKR 0x1301
-#define CONFIG_SYS_MCKR_CSS 0x1302
-
-#endif
-#endif
--
2.17.1
More information about the U-Boot
mailing list