[PATCH 2/5] configs: Add imx8mm-common header
Jagan Teki
jagan at amarulasolutions.com
Sat Feb 27 09:39:36 CET 2021
Move the redundant config item like SPL, memory-related
across all imx8mm config files in the common config header,
imx8mm-common.h
Verified the built files, seems almost the same as before.
Cc: Adam Ford <aford173 at gmail.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Teresa Remmet <t.remmet at phytec.de>
Cc: Igor Opaniuk <igor.opaniuk at toradex.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
include/configs/imx8mm-common.h | 48 ++++++++++++++++++++++++++++++++
include/configs/imx8mm_beacon.h | 48 ++++----------------------------
include/configs/imx8mm_evk.h | 45 ++----------------------------
include/configs/phycore_imx8mm.h | 43 ++--------------------------
include/configs/verdin-imx8mm.h | 42 +++-------------------------
5 files changed, 63 insertions(+), 163 deletions(-)
create mode 100644 include/configs/imx8mm-common.h
diff --git a/include/configs/imx8mm-common.h b/include/configs/imx8mm-common.h
new file mode 100644
index 0000000000..f1afa5c5a9
--- /dev/null
+++ b/include/configs/imx8mm-common.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#ifndef __IMX8MM_COMMON_H
+#define __IMX8MM_COMMON_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_MAX_SIZE (148 * 1024)
+#define CONFIG_SPL_STACK 0x920000
+#define CONFIG_SPL_BSS_START_ADDR 0x910000
+#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x930000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+#define CONFIG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN SZ_32M
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM 0x40000000
+
+#define CONFIG_LOADADDR 0x40480000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#endif /* __IMX8MM_COMMON_H */
diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
index 94f4a1232f..65a44a9ed9 100644
--- a/include/configs/imx8mm_beacon.h
+++ b/include/configs/imx8mm_beacon.h
@@ -6,29 +6,13 @@
#ifndef __IMX8MM_BEACON_H
#define __IMX8MM_BEACON_H
-#include <linux/sizes.h>
-#include <asm/arch/imx-regs.h>
+#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
+#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+#include "imx8mm-common.h"
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x920000
-#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x930000
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#endif
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -92,28 +76,6 @@
"fi; " \
"fi;"
-/* Link Definitions */
-#define CONFIG_LOADADDR 0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN SZ_32M
-
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define PHYS_SDRAM 0x40000000
-#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
-
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index fd9a6cbb8c..d74bc2ea4f 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -6,31 +6,11 @@
#ifndef __IMX8MM_EVK_H
#define __IMX8MM_EVK_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
-
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x920000
-#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x930000
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
+#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#endif
+#include "imx8mm-common.h"
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
@@ -56,27 +36,8 @@
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-/* Link Definitions */
-#define CONFIG_LOADADDR 0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN SZ_32M
-
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define PHYS_SDRAM 0x40000000
-#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index fd69dc41a8..86f4ee3f23 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -7,30 +7,11 @@
#ifndef __PHYCORE_IMX8MM_H
#define __PHYCORE_IMX8MM_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
-
#define CONFIG_SYS_BOOTM_LEN SZ_64M
-#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x920000
-#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
+#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K
+#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x930000
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-#endif
+#include "imx8mm-common.h"
#define CONFIG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
@@ -81,26 +62,8 @@
"fi; " \
"fi;"
-/* Link Definitions */
-#define CONFIG_LOADADDR 0x40480000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN SZ_32M
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-
-#define PHYS_SDRAM SZ_1G
-#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
-
/* UART */
#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 4751bf5a5a..5485bc23aa 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -6,28 +6,12 @@
#ifndef __VERDIN_IMX8MM_H
#define __VERDIN_IMX8MM_H
-#include <asm/arch/imx-regs.h>
-#include <linux/sizes.h>
-
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x920000
-#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
+/* SDRAM configuration */
+#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x930000
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-#endif
+#include "imx8mm-common.h"
#define MEM_LAYOUT_ENV_SETTINGS \
"fdt_addr_r=0x44000000\0" \
@@ -35,9 +19,6 @@
"ramdisk_addr_r=0x46400000\0" \
"scriptaddr=0x46000000\0"
-#define CONFIG_LOADADDR 0x40480000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
/* Enable Distro Boot */
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
@@ -75,25 +56,10 @@
"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x2 " \
"${blkcnt}; fi\0"
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
#if defined(CONFIG_ENV_IS_IN_MMC)
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#endif
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN SZ_32M
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-
-/* SDRAM configuration */
-#define PHYS_SDRAM 0x40000000
-#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
-
/* UART */
#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
--
2.25.1
More information about the U-Boot
mailing list